Civil Engineering Journal
Vol 5, No 4 (2019): April

GGBS And Fly Ash Effects on Compressive Strength by Partial Replacement of Cement Concrete

Phul, Azmat Ali (Unknown)
Memon, Muhammad Jaffar (Unknown)
Shah, Syed Naveed Raza (Unknown)
Sandhu, Abdul Razzaque (Unknown)



Article Info

Publish Date
27 Apr 2019

Abstract

This paper investigates the compressive strength properties of concrete with Ground Granulated Blast Furnace Slag (GGBS) and Fly Ash in concrete by partial replacement of cement. The incremental demand of cement in the construction field is a concern for environmental degradation, in this regard; replacement of cement is carried out with waste materials by using GGBS and Fly Ash. On optimum level of GGBS and Fly Ash was assessed with varied percentage from 0 to 30% for different curing days. Replaced concrete were tested with the slump, compaction factor, Vee-bee and compressive strength. Cement to water ratio was maintained at 0.47 for all mixes. The compressive strength tests were conducted for 3, 7, 14 and 28 days of curing on a M25 grade concrete. The results obtained from the slump, compaction factor, Vee-bee and compressive strength of concrete containing GGBS and Fly Ash was increased as the curing time increases. The workability of replaced concrete improved when slump value achieved 30% as compared to controlled one SF0 and the compressive strength obtained 26.30% improvement at SF9 as compared to SF0. The outcomes indicated that the addition of GGBS and Fly Ash enhances the workability and compressive strength which eventually improved the mechanical properties of concrete.

Copyrights © 2019






Journal Info

Abbrev

cej

Publisher

Subject

Civil Engineering, Building, Construction & Architecture

Description

Civil Engineering Journal is a multidisciplinary, an open-access, internationally double-blind peer -reviewed journal concerned with all aspects of civil engineering, which include but are not necessarily restricted to: Building Materials and Structures, Coastal and Harbor Engineering, ...