Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

BULLETIN OF THE MARINE GEOLOGY

bomg
Website

Published by Marine Geological Institute of Indonesia

ISSN : 14106175 EISSN : 25278843 DOI : -

Core Subject : Science,

Earth & Planetary Sciences

Bulletin of the Marine Geology is a scientific journal of Marine geoscience that is published periodically, twice a year (June and December). The publication identification could be recognized on the ISSN 1410-6175 (print) and e-ISSN: 2527-8843 (on-line) twice a year (June & December) and it has been accredited by Lembaga Ilmu Pengetahuan Indonesia (Indonesian Institute of Sciences) by Decree Number: 818/E/2015. As an open access journal, thus all content are freely available without any charge to the user. Users are allowed to download, and distribute the full texts of the articles without permission from the publisher.

Arjuna Subject : -

Articles 175 Documents

4 5 6 7 8

SEDIMENTATION RATE BASED ON OCEANOGAPHIC PARAMETERS REVIEWS IN THE ESTUARY OF KAPUAS, CENTRAL KALIMANTAN Delyuzar Ilahude
BULLETIN OF THE MARINE GEOLOGY Vol 26, No 2 (2011)
Publisher : Marine Geological Institute of Indonesia

Secara geografis daerah penelitian terletak di muara Sungai Kapuas Kalimantan Tengah. Kawasan pantai ini sangat terbuka dipengaruhi oleh aksi gelombang dari arah tenggara, selatan, baratdaya dan barat. Di pesisir pantai muara Sungai Kapuas terdapat arus sejajar pantai yang bergerak masuk ke arah muara. Pergerakan arus sejajar pantai tersebut memasok sedimen dari arah tenggara dan barat ke muara. Sedimen tersebut cenderung diendapkan di sisi barat dari muara Kapuas. Hal ini menjadi kendala alur pelayaran di muara Sungai Kapuas. Kata kunci : arus sejajar pantai, muara, Kapuas Geographically, the study area is located on the coast of Kapuas River mouth, Central Kalimantan. This open beach area is affected by wave action from southeast, south, southwest and west direction. The longshore current drifts to the estuary on the coastal zone of the Kapuas River. It gives potential sediment supply from the southeast to the north. The sediment tends to be deposited in the western part estuary of Kapuas.This particular thing evokes the ship navigation in Kapuas estuary. Keywords : longshore current, estuary, Kapuas

REVIEW OF COASTAL CHARACTERISTICS OF IRON SAND DEPOSITS IN CILACAP CENTRAL JAVA Hananto Kurnio
BULLETIN OF THE MARINE GEOLOGY Vol 22, No 1 (2007)
Publisher : Marine Geological Institute of Indonesia

Mineable iron sand deposits in Cilacap â€“ southern coastal area of Central Java have certain coastal characteristics that need to be studied in order to understand its depositional environment. With the knowledge of such environment, it can be applied to look for other places prospective of iron sand deposits that have the same characteristics especially recently when Cilacapâ€™s deposits were almost depleted. Coastal characteristics of iron sand deposit in Cilacap is shown by successive sandy beach ridges separated by marshy valleys typical of prograded coasts and by dunes of sand elongated parallel to the shore line with elevation varies from 0 m to 15 m above sea level. The iron sand deposit was derived from denudation of andesite and â€œOld Andesite Formationâ€ enriched in magnetite and ilmenite minerals in the steep elevated and deeply weathered rock hinterlands of Cilacap. High sediment loads of Serayu Basin in the hinterland (3,500-4,500 ton/km2/year; Citarum River basin only 800-1,200 ton/km2/year) was causing extensive deposition of iron sand in the coastal zone. Key words: coast, characteristic, iron sand, Cilacap Endapan pasir besi yang dapat ditambang di Cilacap â€“ pesisir selatan Jawa Tengah memiliki karakteristik pantai tertentu yang perlu dikaji agar dapat dipahami lingkungan pengendapannya. Dengan pengetahuan tentang lingkungan pengendapan tersebut, dapat diterapkan untuk mencari daerah-daerah lain prospek endapan pasir besi yang memiliki karakteristik yang sama terutama pada akhir-akhir ini ketika endapan Cilacap akan habis. Karakteristik pantai endapan pasir besi di Cilacap dicirikan oleh urutan pematang pantai berpasir yang dipisahkan oleh lembah-lembah berawa khas pantai maju dan oleh gumuk-gumuk pasir memanjang sejajar dengan garis pantai dengan ketinggian bervariasi dari 0 m hingga 15 m dari muka laut. Endapan pasir besi di daerah ini berasal dari proses denudasi andesit dan â€œFormasi Andesit Tuaâ€ yang kaya akan mineral magnetit dan ilmenit pada pedalaman Cilacap dengan kondisi elevasi curam dan batuan sangat terlapukkan. Muatan sedimen yang tinggi dari Cekungan Serayu di pedalaman tersebut (3.500-4.500 ton/km2/tahun; cekungan Sungai Citarum hanya 800-1.200 ton/km2/tahun) menyebabkan pengendapan yang sangat luas pasir besi di wilayah pantai. Kata kunci: pantai, karakteristik, pasir besi, Cilacap

3D PROPERTIES MODELING TO SUPPORT RESERVOIR CHARACTERISTICS OF W-ITB FIELD IN MADURA STRAIT AREA Priatin Hadi Widjaja; D. Noeradi
BULLETIN OF THE MARINE GEOLOGY Vol 25, No 2 (2010)
Publisher : Marine Geological Institute of Indonesia

The gas field, initial named W-ITB Field, is located at the southwestern part of the East Java sedimentary basin in Madura Strait area. W-ITB Field was discovered by W-ITB#1 well in 2006. In W-ITB#1 well gas reservoir layer was just only found at Selorejo and Mundu Formation, on the other hand, on W- ITB#2 the gas reservoir is not found in Mundu Formation. Determination of reservoir characteristic including the distribution and quality at W-ITB Field, was done by using 3D geological modelling both for structure and stratigraphy. This model was executed based on integration of well data (petrophysics) and cross section seismic interpretation. The results, at Zone 2 and Zone 3 for vertical V-shale distribution shows as a good quality reservoir (0-15%). Laterally distribution, area at southwest of W-ITB 1 well has low V-shale or chatagorized as a good quality reservoir. While, porosity distribution, zone 1 and zone 2 have better reservoir (29-35% V-shale value) than Zones 3 and 4. NTG distribution result indicates that zone 2 and 3, with high value means a good reservoir. Due to only two exploration well, to guide lateral distribution, so that acoustic from seismic data is used for porosity distribution. Key words: modelling, reservoir, characteristic, V-shale, porosity, quality, Madura Strait Lapangan gas dengan nama inisial W-ITB terletak di bagian barat daya cekungan sedimen Jawa Timur yang termasuk di wilayah Selat Madura. Lapangan ini ditemukan dari Sumur W- ITB#1 pada tahun 2006. Pada sumur W- ITB#1 Lapisan reservoir yang mengandung gas hanya dijumpai pada Formasi Selorejo dan Mundu, namun dari hasil sumur W- ITB#2, lapisan reservoir gas dalam Formasi Mundu tidak diperoleh. Penentuan karakteristik reservoir termasuk distribusi dan kualitasnya di Lapangan W-ITB dilakukan dengan pemodelan geologi 3-Dimensi baik secara struktur dan stratigrafi dengan berdasarkan pada integrasi data sumur pemboran dan penampang seismik yaitu analisis petrofisik dan interpretasi seismik. Berdasarkan pemodelan 3-Dimensi, pada Zone-2 dan Zone-3 untuk distribusi V-shale secara vertikal merupakan zone dengan kandungan reservoir yang baik dengan nilai V-sh 0 â€“ 15%. ecara distribusi lateral, wilayah di bagian barat daya dari sumur W- ITB#1 memiliki kandungan V-sh yang rendah atau dikategorikan reservoir dengan kualitas baik. Adapun pada distribusi porositas, Zona-1 dan Zona-2 mengandung reservoir yang lebih baik dengan nilai 29- 35% daripada Zona-3 dan Zona-4. Hasil distribusi NTG mengindikasikan bahwa Zona-2 dan Zona-3 dengan nilai tinggi mengandung reservoir yang baik. Karena hanya memilki dua sumur eksplorasi, untuk memandu distribusi lateral maka hasil impedansi akustik dari data seismik digunakan untuk distribusi porositas. Kata kunci: pemodelan, reservoir, karakteristik, V-serpih, porositas, kualitas, Selat Madura

Practical Implementation of Multiple Attenuation Methods on 2D Deepwater Seismic Data : Seram Sea Case Study Tumpal Bernhard Nainggolan; Deny Setiady
BULLETIN OF THE MARINE GEOLOGY Vol 32, No 1 (2017)
Publisher : Marine Geological Institute of Indonesia

Some deepwater multiple attenuation processing methods have been developed in the past with partial success. The success of surface multiple attenuation relies on good water bottom reflections for most deepwater marine situations. It brings the bigger ability to build an accurate water bottom multiple prediction model. Major challenges on 2D deepwater seismic data processing especially such a geologically complex structure of Seram Sea, West Papua – Indonesia are to attenuate surface related multiple and to preserve the primary data. Many multiple attenuation methods have been developed to remove surface multiple on these seismic data including most common least-squares, prediction-error filtering and more advanced Radon transform.Predictive Deconvolution and Surface Related Multiple Elimination (SRME) method appears to be a proper solution, especially in complex structure where the above methods fail to distinguish interval velocity difference between primaries and multiples. It does not require any subsurface info as long as source signature and surface reflectivity are provided. SRME method consists of 3 major steps: SRME regularization, multiple modeling and least-square adaptive subtraction. Near offset regularization is needed to fill the gaps on near offset due to unrecorded near traces during the acquisition process. Then, isolating primaries from multiples using forward modeling. Inversion method by subtraction of input data with multiple models to a more attenuated multiple seismic section.Results on real 2D deepwater seismic data show that SRME method as the proper solution should be considered as one of the practical implementation steps in geologically complex structure and to give more accurate seismic imaging for the interpretation.Keywords : multiple attenuation, 2D deepwater seismic, Radon transform, Surface Related Multiple Elimination (SRME). Banyak metode atenuasi pengulangan ganda dikembangkan pada pengolahan data seismik dengan tingkat keberhasilan yang rendah pada masa lalu. Keberhasilan dalam atenuasi pengulangan ganda permukaan salah satunya bergantung pada hasil gelombang pantul pada batas dasar laut dan permukaan pada hampir seluruh survei seismik laut. Hal tersebut menentukan keakuratan dalam membuat model prediksi pengulangan ganda dasar laut dan permukaan air. Tantangan utama dalam pemrosesan data seismik 2D laut dalam khususnya struktur geologi kompleks seperti Laut Seram, Papua Barat – Indonesia adalah pada kegiatan menekan pengulangan ganda permukaan sekaligus mempertahankan data primer. Beberapa metode yang dikembangkan untuk menghilangkan pengulangan ganda permukaan pada data seismik seperti least-square, filter prediksi kesalahan dan transformasi Radon.Dekonvolusi Prediktif dan Metode Surface Related Multiple Elimination (SRME) digunakan sebagai solusi yang baik pada struktur kompleks dimana metode-metode lain gagal untuk memisahkan perbedaan kecepatan interval data primer dan pengulangan ganda. Metode tersebut tidak membutuhkan informasi bawah permukaan selain parameter sumber dan reflektivitas permukaan. Metode SRME terdiri dari 3 tahapan utama : regularisasi SRME, pemodelan pengulangan ganda dan pengurangan adaktif least-square. Regularisasi near offset diperlukan untuk mengisi kekosongan pada near offset yang disebabkan oleh adanya sejumlah tras terdekat yang tidak terekam selama akuisisi. Pemodelan maju digunakan untuk memisahkan data primer dan pengulangan ganda kemudian inversi dengan pengurangan input data dengan model multiple.Hasil pada data seismik 2D laut dalam menunjukkan bahwa metode SRME layak diterapkan sebagai salah satu pengembangan metode atenuasi multiple permukaan serta untuk meningkatkan akurasi data seismik terutama untuk struktur geologi kompleks.Kata kunci : peredaman pengulangan ganda (multiple), seismik 2D laut dalam, transformasi Radon, Surface Related Multiple Attenuation (SRME).

QUALITY IMPROVEMENT OF SEISMIC IMAGE FROM 2D PSDM (PRE STACK DEPTH MIGRATION) USING TOMOGRAPHY FOR INTERVAL VELOCITY MODEL REFINEMENT Hagayudha Timotius; Yulinar Firdaus
BULLETIN OF THE MARINE GEOLOGY Vol 28, No 2 (2013)
Publisher : Marine Geological Institute of Indonesia

The main goal of seismic exploration is to get an accurate image of subsurface section so it can be easily interpreted. Pre Stack Depth Migration (PSDM) is such a powerful imaging tool especially for complex area such an area where strong lateral velocity variations exist. The main challenge of PSDM is the need of accurate interval velocity model.In this research, Dix Transformation, coherency inversion, and tomography are used for initial interval velocity model, and then tomography is used for interval velocity model refinement. We compare also between seismic image resulted from PSDM and PSTM to determine the best method. The seismic data that processed in this paper is derived from north western part of Australian Waters. Kata kunci: Pre Stack Depth Migration, Dix Transformation, coherency inversion, tomography. Tujuan utama dari eksplorasi seismik adalah menghasilkan citra yang akurat dari penampang bawah permukaan sehingga diinterpretasi lebih mudah. Pre Stack Depth Migration (PSDM) merupakan suatu metode yang memberikan hasil peningkatan kualitas citra seismik pada daerah kompleks dimana terjadi variasi kecepatan lateral yang signifikan. Salah satu syarat penting yang harus dipenuhi agar hasil PSDM lebih optimal adalah model kecepatan interval yang akurat. Dalam penelitian ini Transformasi Dix, inversi koheren, dan tomografi digunakan untuk memenuhi syarat tersebut. Perbandingan hasil penampang seimik PSDM dan PSTM dilakukan untuk menentukan metode terbaik. Data seismik yang diolah dalam tulisan ini berasal dari wilayah Perairan Baratlaut Australia. Kata kunci: Pre Stack Depth Migration, Transformasi Dix, inversi koheren, tomografi

The Mechanism of Sediment Depositional Environment of Core Drilling of Gilimanuk Coast, Bali and Ketapang, East Java, Based on Sediment Textures Ediar Usman
BULLETIN OF THE MARINE GEOLOGY Vol 31, No 1 (2016)
Publisher : Marine Geological Institute of Indonesia

The analysis result of grains frequency curve and relation between grains size to cumulative have shown medium grains at Gilimanuk (Core drilling-1) and coarse grains at Ketapang (Core drilling-2). In general both of them are showed by pattern uniformity, which is represented by the similar of curve pattern. On the grain size of -2 phi as medium gravel with percentage between 6.47 to 35.88%, while core drilling -2 on the size of -2 phi between 6.86 to 61.11%.The average grains size of core drilling -1 are gravel about 21.3%, sand 60.2%, silt 5% and clay about 0.4% while core drilling-2 are characterized by 44.3%, sand 26.8%, silt 24.6% and clay about 0.6%. These result shows that at location of Core drilling -1 is dominated by sand where as at location of Core drilling -2 is dominated by gravel. These situation can be interpreted that the sediment at core drilling -2 location have influenced by strong marine current which can transport the large amount of gravel size compare to the location of Core drilling-1 which is dominated by sand. Based on the relation shape of grains size curve versus cumulative frequency shows that the sediment of Core drilling-1is interpreted as a beach sand deposits and only one sample which shows as a river sand deposits which was found at depth 0 – 3 m depth. In general, the sample of Core drilling –2 shows that the pattern of sediment tend as a beach sand deposits and only one sample which shows the combination between coastal deposits and river deposits ( 4 – 5 m depth). From this sample, the coarse to fine grains is deposited by coastal media and fine grains material (about 10%) is deposited by river media. The sample of river deposits is found as lamination because the only one which is created from combination between coastal and river depos its from all sample of core drilling-2.Keywords: core drilling, grain sediments, media transport, environmental deposition Hasil analisis menggunakan kurva frekuensi butiran serta hubungan antara besar butir terhadap kumulatif menunjukkan dominasi ukuran butiran sedang di daerah Gilimanuk (Bor-1) dan kasar di daerah Ketapang (Bor-2). Pada kedua daerah tersebut, secara umum memperlihatkan pola keseragaman, yang ditunjukkan oleh pola kurva yang sama. Pada ukuran butir -2 phi (kerikil sedang) pada Bor-1 berjumlah antara 6,47 – 35,88%, sedangkan pada Bor-2 pada ukuran -2 phi berjumlah antara 6,86 – 61,11%.Kandungan rata-rata butiran pada Bor-1 adalah: kerikil 21,3%, pasir 60,2%, lanau 5% dan lempung 0,4%, sedangkan Bor-2 adalah: kerikil 44,3%, pasir 26,8%, lanau 24,6% dan lempung 0,6%. Hasil ini menunjukkan bahwa pada Bor-1 didominasi oleh pasir dan pada Bor-2 didominasi oleh kerikil. Hasil ini dapat memberi gambaran bahwa pada Bor-2 berarus lebih kuat karena mampu menstranspor butiran kerikil dalam jumlah yang lebih besar dibandingkan dengan Bor-1 yang didominasi oleh pasir. Berdasarkan beberapa kurva hubungan antara besar butir vs frekuensi komulatif pada Bor-1 menunjukkan endapan pantai (beach sand), hanya satu contoh menunjukkan endapan sungai (river sand), yaitu contoh B1 (0 – 3m). Pada Bor-2, secara umum menunjukkan pola yang lebih mendekati endapan pantai (beach sand), hanya satu contoh menunjukkan kombinasi endapan pantai dan endapan sungai (river sand), yaitu contoh B2 (4 – 5 m). Pada contoh ini, butiran berukuran kasar sampai halus diendapkan oleh media pantai dan ukuran halus dengan persentase sekitar 10% merupakan endapan sungai. Contoh endapan sungai adalah pada B2 (4 – 5 m) ini merupakan endapan sisipan karena satu-satu terbentuk dari kombinasi pantai dan sungai dari seluruh contoh pada Bor-2.Kata kunci: pemboran inti, butiran sedimen, media transport, lingkungan pengendapan

INDICATION OF GOLD AND SILVER OCCURRENCE AT SAMPIT BAY, KOTA WARINGIN TIMUR DISTRICT, CENTRAL KALIMANTAN PROVINCE I Wayan Lugra; Udaya Kamiludin
BULLETIN OF THE MARINE GEOLOGY Vol 28, No 1 (2013)
Publisher : Marine Geological Institute of Indonesia

The study area is fluviatile deposit which consists of yellow to light gray loose sand, iron oxide, and kaoline spreading from the land shallowing to sea direction. Concentration grade for determining of gold and silver content used a total analysis of the hot mixture HF-HNO3-HClO4 with measurements "Atomic Absorption Spectrofotometry".(AAS). Highest concentration of gold and silver found at sample GCTS-31 that gold 0.096 ppm and silver 2.284 ppm, in muddy sand type sediment, at 3.1 meters depth and arround 1,250 meter length from coast line. While the lowest concentration of the gold was 0.025 ppm found at sample GBTS 14 in very fine sand type sediment located at 1.07 meter depth and approximately 320 meters length from coast line. The lowest concentration of the silver was founded at sample GBTS 25 that is 0.860 ppm in sandy mud sediment type located at 2.49 meters depth and approximately 3,000 meters length from the coast line. The gold placer is may derived from weathering of Pambuang Formation which spreads in the west and north of Sampit Bay, and transported by Mentaya River and longshore current system. Key word : sediment samples, laboratory analyses, gold, silver and Sampit Bay. Daerah penelitian merupakan endapan fluviatil terdiri dari pasir lepas berwarna kuning muda sampai abu-abu pucat, oksida besi, dan kaolin yang memiliki sebaran makin mendangkal ke arah laut. Kadar konsentrasi untuk menentukan kandungan emas dan perak menggunakan analisis total campuran HF-HNO3-HClO4 dengan metoda AAS. Analisa besar butir digunakan untuk memisahkan sedimen fraksi kasar sedangkan analisa pipet dilakukan terhadap sediment fraksi halus. Kadar emas dan perak tertinggi terdapat pada contoh GCTS -31, yaitu emas 0,096 ppm dan perak 2,284 ppm, pada jenis sedimen lumpur pasiran, di kedalaman 3,1 meter dan sekitar 1.250 meter dari garis pantai. Sedangkan kadar emas terendah yaitu 0,025 ppm terdapat pada contoh GBTS 14 pada jenis sedimen pasir sangat halus di kedalaman 1,07 meter dan sekitar 320 meter dari garis pantai. Kadar perak terendah dijumpai pada contoh GBTS 25 yaitu 0,860 ppm dengan jenis sedimen pasir lumpuran pada kedalaman 2,49 meter dan sekitar 3.000 meter dari garis pantai. Sumber emas plaser diperkirakan dari lapukan Formasi Pembuang yang memiliki sebaran cukup luas di sebelah barat dan utara Teluk Sampit dan ditransportasi oleh Sungai Mentaya dengan anak-anak sungainya, serta sistem arus memanjang pantai. Kata kunci : contoh sedimen, analisis laboratorium, emas, perak dan Perairan Teluk Sampit.

HYDROTHERMAL MINERALIZATION IN JAILOLO WATERS, WEST HALMAHERA, NORTH MALUKU PROVINCE Lili Sarmili
BULLETIN OF THE MARINE GEOLOGY Vol 30, No 1 (2015)
Publisher : Marine Geological Institute of Indonesia

Halmahera Island tectonically is divided into two main regimes, those are East Arm Regime (EAR) and West Arm Regime (WAR). Both regimes have very different characteristics where the EAR consists of Cretaceous ultramafic rocks and old red shale, while the WAR composed of Neogene sediment. The study area is an area with active tectonism shown by recent seismic activities and volcanic eruptions. Hydrothermal activity is indicated by rocks alteration of andesite, dacite, and diorite such as kaolinite, argilic and montmorilonite. Primary metal type mineralization occured in a strong altered volcanic rocks, while the secondary mineralization occured in the sedimentary placer. AAS, petrographic analysis, and mineralografi obtained mineral pyrite, manganese, chalcopyrite in rocks from coastal and marine offshore up to depth of 100 meters. Analysis of the 36 examples of seabed sediments, showed the presence of anomalous metal minerals of Au, Cu, Mn, and Fe those are content of Au 0.01 - 0.03 ppm; Cu 14-150 ppm; Mn 23-1050 ppm; and Fe 2-10%.Keywords: Jailolo waters, western arm regime (WAR), andesite, dacite and diorite intrusion rocks, mineralization of Au, Cu, Mn, and Fe. Pulau Halmahera tektonik dibagi menjadi dua rezim utama, yaitu East Arm Rezim (EAR) dan Westt Arm Rezim (WAR). Kedua rezim memiliki karakteristik yang sangat berbeda yang EAR terdiri dari batuan ultrabasa Kapur dan shale merah tua, sedangkan WAR Terdiri dari batuan sedimen berumur Neogen. Daerah penelitian sebagai daerah dengan tektonik dan vulkanik aktif yang ditunjukan dengan aktifitas gempa dan letusan gunungapi hingga sekarang. Aktifitas hidrothermal ditunjukkan oleh alterasi pada batuan andesit, dasit, dan diorite. Mineral ubahan yang terbentuk kaolinit, argilik dan montmorilonit. Tipe mineralisasi logam primer terdapat dalam batuan vulkanik terubah kuat, sedangkan mineralisasi sekunder terdapat dalam sedimen plaser. Hasil analisis AAS, petrografi, dan mineralografi didapatkan mineral pirit, mangan, kalkopirit pada batuan di pesisir dan laut lepas hingga kedalaman 100 meter. Hasil analisis terhadap 36 sedimen dasar laut, menunjukan adanya kandungan mineral logam Au,Cu, Mn, dan Fe dengan kadar Au=0.01 - 0,03 ppm; Cu 14-150 ppm; Mn 23-1050 ppm; dan Fe 2-10% . Kata kunci: Mandala lengan barat (MLB), batuan intrusi andesit, dasit, dan diorit, mineralisasi Au, Cu, Mn, dan Fe, Perairan Jailolo, Halmahera Barat.

SEAFLOOR SEDIMENT CHARACTERISTICS AND HEAVY MINERAL OCCURENCES AT BETUMPAK CAPE AND ADJACENT AREA, BANGKA STRAIT, BANGKA BELITUNG PROVINCE Rohendi Rohendi; Noor C.D. Aryanto
BULLETIN OF THE MARINE GEOLOGY Vol 27, No 1 (2012)
Publisher : Marine Geological Institute of Indonesia

Thirty seafloor of sediment samples have been taken by using gravity corer and grab sampler at Betumpak Cape, and adjacent area of Bangka Belitung. The result of grain size analyses show that there are four sediment units: gravelly sand, gravelly muddy sand, silt and silty sand. Identification of Scanning Electron Microscope (SEM) image on several samples shows the presence of clay mineral such as smectite, alunite, chlorite etc., may resulted from plagioclase weathering of granite. Based on heavy mineral analyses, its highest content is found at MTK-27 (northwest of Betumpak Cape). High content of apatite (0.94% wt and 1.07% wt) is found on coarse sand fractions (115-170 mesh) at MTK-29 (northeast Ular Cape) and MTK-30 (north of Ular Cape). Generally, the heavy mineral accumulation is occurred on medium sand fraction (60-80 mesh) as magnetite (7.86% wt), ilmenite (4.9% wt) and zircon (1.32% wt). Based on these data, it shows that heavy mineral is accumulated on medium to coarse sand. Keywords: sea floor sediment, grain size analysis, heavy minerals, and Betumpak Cape, Bangka strait. Sebanyak 30 sampel sedimen dasar laut telah diambil dengan menggunakan pemercontoh jatuh bebas dan comot di Perairan Tanjung Betumpak dan sekitarnya, Bangka Belitung. Hasil analisis besar butir menunjukkan adanya 4 satuan sedimen, yaitu pasir kerikilan, pasir lumpuran sedikit kerikilan, lanau dan pasir lanauan. Hasil identifikasi citra Scanning Electron Microscope (SEM) terhadap beberapa sampel, memperlihatkan kehadiran mineral lempung seperti smektit, alunit, klorit dll., kemungkinan sebagai hasil pelapukan plagioklas dari granit. Berdasarkan analisis mineral berat kandungan tertinggi terdapat di lokasi MTK-27 (baratlaut Tanjung Betumpak). Akumulasi mineral berat umumnya terdapat pada fraksi pasir ukuran sedang (60-80 mesh) berupa magnetit, ilmenit dan zirkon masing-masing dengan kandungan 7,86 % berat. 4,9% berat dan 1,32% berat. Pada fraksi pasir kasar (115-170 mesh) dijumpai kandungan apatit tertinggi di MTK-29 (timurlaut Tanjung Ular) dan MTK-30 (utara Tg. Ular) sebesar 0,94% berat dan 1,07% berat. Dari data tersebut terlihat, bahwa secara umum mineral berat terakumulasi pada pasir sedang hingga pasir kasar. Kata kunci: Sedimen permukaan dasar laut, analisis besar butir, mineral berat, dan Tanjung Betumpak, Selat Bangka.

Elemental Analysis on Marine Sediments Related to Depositional Environment of Bangka Strait Pungky Sampurno; Rina Zuraida; Nazar Nurdin; Luli Gustiantini; Noor Cahyo Dwi Aryanto
BULLETIN OF THE MARINE GEOLOGY Vol 32, No 2 (2017)
Publisher : Marine Geological Institute of Indonesia

Study of elemental composition in sediment has been proven useful in interpreting the depositional environmental changes. Multi Sensor Core Logger (MSCL) is a non-destructive analysis that measures several parameters in sediment core including magnetic susceptibility and elemental composition. Magnetic susceptibility and elemental analysis were measured in four selected marine sediment cores from western part of Bangka Strait (MBB-67. MBB-119, MBB-120 and MBB-173) by using magnetic susceptibility and X-ray Fluorescence (XRF) sensors attached to the MSCL. The data was collected within 2 cm interval. Scatter plots of Y/Zr and Zr/Ti show singular trend demonstrated by sediments from MBB-173 and two groups that composed of MBB-67 (Group 1) and MBB-119 + MBB-120 (Group 2). MBB-67 that is located adjacent to Klabat Granite shows upward changes in mineralogy, slight increase of grain size and negligible change in Y concentration. Cores MBB-119 and MBB-120 are inferred to be deposited during regression that resulted in the accummulation of Y-bearing zircon in MBB-119 before the mineral could reach MBB-120. Core MBB-173 is interpreted to be the product of plagioclase weathering that is submerged by rising sea level. This core contains a horizon of rich Y-bearing zircon at 60 cm.Keywords: Multi Sensor Core Logger, X-Ray Fluorescence, magnetic susceptibility, depositional environment, Bangka Island Studi tentang komposisi unsur kimia dalam sedimen telah terbukti bermanfaat dalam interpretasi perubahan lingkungan pengendapan. Multi Sensor Core Logger (MSCL) adalah sebuah analisis yang non-destructive, untuk mengukur beberapa parameter dalam bor sedimen termasuk suseptibilitas magnetik dan kandungan unsur. Suseptibilitas magnetik dan kandungan unsur diukur dari 4 bor sedimen laut yang terpilih di bagian barat Selat Bangka (MBB-67. MBB-119, MBB-120 and MBB-173) dengan menggunakan sensor suseptibilitas magnetik (MS) dan X-ray Fluorescence (XRF) yang terpasang pada MSCL. Pengukuran dilaksanakan dengan interval 2 cm. Plot Y/Zr dan Zr/Ti menunjukkan satu trend yang diperlihatkan oleh sedimen bor MBB-173 dan dua grup yang terdiri atas MBB-67 (Grup 1) dan MBB-119 + MBB-120 (Grup 2). Bor MBB-173 ditafsirkan sebagai hasil pelapukan plagioklas yang kemudian terendam air laut. Bor ini memperlihatkan horizon yang kaya akan zirkon pembawa yttrium pada kedalaman 60 cm.Kata kunci : Multi Sensor Core Logger, X-Ray Fluorescence, suseptibilitas magnetik, lingkungan pengendapan, Pulau Bangka

Page 6 of 18 | Total Record : 175

4 5 6 7 8

Filter by Year

2007 2025

Filter By Issues

All Issue Vol 40, No 1 (2025) Vol 39, No 2 (2024) Vol 39, No 1 (2024) Vol 38, No 2 (2023) Vol 38, No 1 (2023) Vol 37, No 2 (2022) Vol 37, No 1 (2022) Vol 36, No 2 (2021) Vol 36, No 1 (2021) Vol 35, No 2 (2020) Vol 35, No 1 (2020) Vol 34, No 2 (2019) Vol 34, No 1 (2019) Vol 33, No 2 (2018) Vol 33, No 1 (2018) Vol 32, No 2 (2017) Vol 32, No 1 (2017) Vol 31, No 2 (2016) Vol 31, No 1 (2016) Vol 30, No 2 (2015) Vol 30, No 1 (2015) Vol 29, No 2 (2014) Vol 29, No 1 (2014) Vol 28, No 2 (2013) Vol 28, No 1 (2013) Vol 27, No 2 (2012) Vol 27, No 1 (2012) Vol 26, No 2 (2011) Vol 26, No 1 (2011) Vol 25, No 2 (2010) Vol 25, No 1 (2010) Vol 24, No 2 (2009) Vol 24, No 1 (2009) Vol 23, No 1 (2008) Vol 22, No 1 (2007) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Unknown,

Unknown

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Unknown, Unknown INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Unknown,

Unknown

INDONESIA