Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 9 Documents

Search results for , issue "Vol 3, No 2 (2002)" : 9 Documents clear

PERENCANAAN PERAWATAN MESIN DENGAN METODE MARKOV CHAIN GUNA MENURUNKAN BIAYA PERAWATAN Eartono, M.; Mas'udin, Ilyas
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Problem often faced by a fertilizer bagging machine unit is the inegularity of machinemaintenance in which the machine is operated continuously until it damages and can not beoperated any longer. It will result in relatively high down time cost.To solvet his problem we propose a machine maintenance planing based upon data acquired by using Markov Chain Method.There are four types of maintenance we propose they are:l. Maintenance planing with corrective maintenance or high level of damage condition and preventive maintenance or mediurn le vel ofdamage condition.2. Maintenancep laningw ith correctivem aintenancfeo r high and medium level of damageconditiona ndp reventivem aintenancfeo r low levelo fdamagec ondition.3. Maintenance planing with corrective maintenance or high level of damage condition andpreventive maintenance or medium and low level of damage condition4. Maintenance planing with corrective maintenance or high and medium level of damage condition.To determine the best proposal that will be selected we use analysis of preventive maintenance cost and corrective maintenance cost that will result in expected cost for eachmachine.From the four proposals one with the least expected cost is chosen that is planing with corrective maintenance for high level of damage condition and preventive maintenance formedium and low level ofdamage condition.

PENERAPAN STUDI REKAYASA NILAI PADA PERENCANAAN STRUKTUR ATAP GEDUNG SERBA GUNA UNIVERSITAS MUHAMMADIYAH MALANG Retno, Dyah; Hastuti, Hermy Dyah
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research will apply value engineering study in planing roof Astructure of UMM's Multi Function Building (GSG). The planing includes roof geometry and material used as roofcover and skeletons. Steps taken includes information stage that have goal in determining criteria necessary in planing the roof structure and weight of the criteria,creativity stage in which we will develop roof structure altematives as many as possible by using FAST diagram,and then evaluation stage in which we will make assessment on those altematives by using feasibility and evaluation matrix, performance calculation,and calculation of cost required by respective altematives.In development st age we will make value calculation of respective alternatives, inwhich an altemative with the highest value will be chosen as proposal for roof of UMM's Multi Function Building.

Perbandingan Performasi Metode Johnson dengan Heuristik Multi Tujuan Ditinjau dari Makespan Total Flow Time dan Iddle Time Garside, Annisa Kesy
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This researchtd es to implementa methodo f rnachines chedulingfo r flow shopc alledMulti ObjectiveH euristicT. o makee asiera pplicationin attainingjo b sequencteh atm achinem ustdo alongw ith makespavna lue,l otal flow time, andi dle time,t hen a softwareis made Next, wemakea iomparisono f machines chedulingre sultp erformancbee tweenM ulti objectiveH euristicMethoda ndl ohnsonM ethodi f viewedf iom makespavna lue,t otalf low time,a ndi dlet ime. Fromthe resulto f researchc oncludedth at heuristic with multi objectivesm ethods howst he solutionsflow timet otalf ewert hanJ ohnsonm ethod

Pengembangan Struktur Ekonomi Jawa Timur pada Tahun 2002 dengan Menggunakan Linear Goal Programming Santoso, Sugeng; Handayani, Ratri
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research has objective in planning economic structure of East Java in 2002.Some aspect should be considered in planing the structure are consumer demand fulfillment that hasclose relation with output which must be resulted by respective sector,PDRB target achievement while paying attention on problem of absorbing labor force in the respective economic sector and import reduction.To attain the structure we use concept of linear goal programming. The first step we take is developing a model suitable for the linear goal programming and then manipulating data hat is began by aggregation updating,arranging technology coellcient, labor force coefficient,added value coeffcient import coefficient and right side value. To get a solution of the existing model we make use of QS software.From the result of research could be concluced that priority sector must be priority are l. Trading, 2. Textile Industries 3. Transportation4. cigaretteindustry,6. Food of plants.The critical sector have to be attended are 1. Fishery,2. Bevarage industry, 3. Forestry

PENENTUAN JUMLAH TENAGA KERJA DENGAN MENGGUNAKAN SIMULASI ANTRIAN DI DEPARTEMEN PRODUKSI DI PT. SURYA TUBAL INDONESIA Astuti, Murti; Mas'udin, Ilyas
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

In its productionp rocessa, companyis consistedo f variousd epartmentssu pponingo neanother in a good teamwork to build a single unity. Therefore inefiiciency in one of thosedepartmentsw ill affect other departmentsth at in turn will have impact on production outcome.One of thosed epartmentiss producliond epartmentth at is one of the most imponants ectionswhichp laysi mportanrt olei n productions moothness.One of problemsd isturbingt he smoothnesosf flow processin this departmenits theproblemo f long productl ining markedb y considerablwea itingt ime.T his is certainlyi neffectivesince it will not only disturb the production process flow but also decrease the product qualitycausedb y too muchw aitingt ime in the line. Thereforew, e havet o makea n efforti n reducingth eline sizew hile still considert he costj ust in casea n improvemenits made.T o overcometh ismatter,o new ay we couldt akei s utilizinga line simulationb y optimizings ervicefa cilitiesn umber(numbero f laborf orce)w ith minimumc osta ndp roductw aitingt ime.

PENGENDALIAN SAFETY STOCK GUNA MEMINIMALKAN BIAYA PENYIMPANAN MELALUI PENDEKATAN SISTEM KANBAN SEBAGAI PENDUKUNG SISTEM PRODUKSI JUST IN TIME Wiwi, Umar; Kristinawati, Eti
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Based on ultimate goal of each company in gaining maximum profit with minimum total cost then one of alternative should be done in achieving this goal is avoiding excessive raw material stock resulting in high storage cost. The object of this research is CV. Pabrik Mesin Guntur Malang,an industrial water pumpcompany which is having difficulty in controlling raw material stock so that it often experiences abundant stocks.So,the problem is how to make stock controli n order to reduce stocks a mount that will result in storage cost reduction. Production S ystem Just in Time applying Karban system, that has been being implemented this far by Toyota Motor Corporation, Japan, is proposed to be implemented in that company as well in order to reduce prevailing inefficiency result from this existing problem. By applying Kanban system as support for the Production System Just in Time, it is shown that the system is capable in reducing stocka mount by 77.56%f or GTR type water pump and 89.59% for GTO type water pump. While reductions of storage cost achieved are78.99% for GTR type water pump and 90.45% for GTO tlpe water pump

Perencanaan Persediaan Suku Cadang (Spare Part) Mesin Tenun Sulzer Ruti Berdasarkan Analisis Keandalan Baroto, Teguh; Solikhati, Tutik
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Availability of machine spare parts is very supporting f or maintenancea ctivity conductedin order to improve the machine performance. So far, PT. Eratex Djaja often have difficulty inananging component stock particularly critical component of Sulzer Ruti machine, so it isnecesiary to deie.-ine theo ptimums tockc onditionto minimizer esultedc ost. In this researcwh ewill utilize probabiliticasl tockm odelw ith fixed amounto f order (Q systemm odel)i n ordert omake average stock in storage as low as possible considering quite high price of the criticalcomponent. In addition to this, it is also required that level of component availability ismaximized.B asedo n the stock model,w e are ablet o approachth e componenta mountr equiredf ora givenp eriodb y assumingc onsta.natv eraged efectr ate.F rom the lesealchc anb e conlusedth atthe numbero f componentms ustb e requiredf or quidet oothb lock assimetrical:6, upper meanbrake lining blue : 10, lower brake lining blue : 12, and upper front brake lining blue =15

Analisa Pemilihan Saham untuk Portofolio Optimal dengan Metode Kriteria Sederhana Lukman, Mohammad; Hari, Moch.
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Generally, problem faced in making a portfolio is the large number of probabilities in risky active stock combinations available at stock market yet, if we put riskless active stock intothose combinations considering this numerous possibilities of portfolio made from stocks at stock market,a question that will arise is which portfolio to be chosen by investors. If acting rationally, the investors will chosen optimum portfolio. simple criteria method is an alternative method in forming the optimum portfolio with objective in determining stock rank in effrcient limit. This methods firstry deveroped by EltonEdwin, Gruber,and Padberg( 1976) and exposed in Journal of Finance.The calculation made refers to Single-Index Mode, a model result from simplification of Markowitz model, such thatthe calculation will be easier and more practical.Based on examination, it is identified that retum correlaltion among securities (particularly on stock) occurs because of response to changes in general market index. Research conducted at BES ( Surabaya Stock Market),within period of December 1999 to August 2001, using monthly data had shown that by using method ofÂ "simple criteria for optimal porfolio selection" it is known from 173 stock,that stocks included in optimum portfolioonly 12 (or 6,94%) stock are: Makindo, Mas Murni Indonesia,S arasa Nugraha,Jakarta Int I Hotel & Dev. sari Husada Ultra Jaya Milk, prasdha aneka, Ever Shine Textile Ind., Tirta MahakamPly'wood Asahimas Flat Glass Semen Gresik dan Unilever I ndonesia with proportion of 72.0g% ,4,24y o;12.28% , I %;0.63%;0.5%; 0,445;0.18%a; And 0.45% respectively.

Penerapan Ergonomi dalam Pembuatan Kursi Kerja Guna Meningkatkan Produktifitas Kerja Karyawan Kholik, HM.; Estrimaz, Ayudina Puji
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Evalry Konfeksi is a developing home industry in Tulungagung with woman's attire as it main product.Stitching section p lays important role here since most of work activities are centeredat this section. One facility that has a great impact is working chair, because with more ergonomic working chair the employees will be able to reduce boredom and fatigue at particular part of their body.This will eventually be able to minimize working time so that there will be an improvementon work output and productivity.From analysis on the research results upon 20 employees during 7 days of on-site observation, we get unimprovement on average work efliciency for each work element by22.05 %. The average working time of each element using the new designed working chair is in fact shorter if compared to those of using the old designed.This reduction is 5.72 minutes/product unit on average, thus there is an improvement on employees productivity.It can be concluded that using the new designed working chair will be capable in resulting in positive impact on company's output lmprovement.

Page 1 of 1 | Total Record : 9

Filter by Year

2002 2002

Filter By Issues

All Issue Vol. 25 No. 2 (2024): August Vol. 25 No. 1 (2024): February Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol 20, No 2 (2019): August Vol. 20 No. 2 (2019): August Vol. 20 No. 1 (2019): February Vol 20, No 1 (2019): February Vol 19, No 2 (2018): Agustus Vol. 19 No. 2 (2018): Agustus Vol. 19 No. 1 (2018): Februari Vol 19, No 1 (2018): Februari Vol 18, No 2 (2017): Agustus Vol. 18 No. 2 (2017): Agustus Vol. 18 No. 1 (2017): Februari Vol 18, No 1 (2017): Februari Vol. 17 No. 2 (2016): Agustus Vol 17, No 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol 16, No 2 (2015): Agustus Vol. 16 No. 2 (2015): Agustus Vol. 16 No. 1 (2015): Februari Vol 16, No 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol 15, No 1 (2014): Februari Vol. 15 No. 1 (2014): Februari Vol. 14 No. 2 (2013): Agustus Vol 14, No 2 (2013): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 2 (2012): Agustus Vol 13, No 1 (2012): Februari Vol. 13 No. 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol 12, No 1 (2011): Februari Vol. 12 No. 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol. 11 No. 1 (2010): Februari Vol 11, No 1 (2010): Februari Vol 10, No 2 (2009): Agustus Vol. 10 No. 2 (2009): Agustus Vol 10, No 1 (2009): Februari Vol. 10 No. 1 (2009): Februari Vol 9, No 2 (2008): Agustus Vol. 9 No. 2 (2008): Agustus Vol 9, No 1 (2008): Februari Vol. 9 No. 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol. 8 No. 1 (2007): Februari Vol 8, No 1 (2007): Februari Vol. 4 No. 2 (2003) Vol 4, No 2 (2003) Vol 3, No 2 (2002) Vol. 3 No. 2 (2002) Vol. 3 No. 1 (2002) Vol 3, No 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol 2, No 1 (2001) Vol. 2 No. 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol 1, No 1 (2000) Vol. 1 No. 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA