cover
Article Per Year (5 Year)
All
Home Page
OAI Link
Editorial Team
Contact
Reviewer
Google Scholar
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota bandung,
Jawa barat
INDONESIA
Journal of Engineering and Technological Sciences
Published by Institut Teknologi Bandung
ISSN : 23375779     EISSN : 23385502     DOI : -
Core Subject : Engineering,
Engineering
Journal of Engineering and Technological Sciences welcomes full research articles in the area of Engineering Sciences from the following subject areas: Aerospace Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Electrical Engineering, Engineering Physics, Environmental Engineering, Industrial Engineering, Information Engineering, Mechanical Engineering, Material Science and Engineering, Manufacturing Processes, Microelectronics, Mining Engineering, Petroleum Engineering, and other application of physical, biological, chemical and mathematical sciences in engineering. Authors are invited to submit articles that have not been published previously and are not under consideration elsewhere. Starting from Vol. 35, No. 1, 2003, full articles published are available online at http://journal.itb.ac.id, and indexed by Scopus, Index Copernicus, Google Scholar, DOAJ, GetCITED, NewJour, Open J-Gate, The Elektronische Zeitschriftenbibliothek EZB by University Library of Regensburg, EBSCO Open Science Directory, Ei Compendex, Chemical Abstract Service (CAS) and Zurich Open Repository and Archive Journal Database. Publication History Formerly known as: ITB Journal of Engineering Science (2007 – 2012) Proceedings ITB on Engineering Science (2003 - 2007) Proceedings ITB (1961 - 2002)
Arjuna Subject : -
Articles 1,267 Documents
 53   54   55   56   57 
Characteristics of Rainfall-Induced Slope Instability in Cisokan Region, Indonesia Sugeng Krisnanto; Harianto Rahardjo
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.4

Abstract

A 25.5 km long access road has been constructed in a hilly area in Cisokan region. Several slope instabilities occurred during the rainy season, particularly at the end of heavy rainfall. A comprehensive study was performed to understand the characteristics of rainfall-induced slope instability. The study consisted of field observation, analyses of field and laboratory test data, and numerical analyses. The study revealed that in general there were two categories of slopes with instability characteristics: (i) slopes with a significant groundwater level increase during rainfall; (ii) slopes with an insignificant groundwater level increase during rainfall. In the first category, the slope instability was caused by a loss of matric suction and eventually the pore-water pressure, uw became positive as indicated by an increase of the groundwater level. In the second category, the slope instability was caused by a loss of matric suction without a rise in pore-water pressure, uw, to a positive magnitude. Two empirical curves of slope stability were developed as a preliminary guidance to assess slope stability during rainfall in the region.
Improved Modified Symbiosis Organisms Search (IMSOS): A New and Adaptive Approach for Determining Model Parameters from Geoelectrical Data Sungkono Sungkono; Hendra Grandis
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.5

Abstract

Symbiotic Organisms Search (SOS) is a global optimization algorithm inspired by the natural synergy between the organisms in an ecosystem. The interactive behavior among organisms in nature simulated in SOS consists of mutualism, commensalism, and parasitism strategies to find the global optimum solution in the search space. The SOS algorithm does not require a tuning parameter, which is usually used to balance explorative and exploitative search by providing posterior sampling of the model parameters. This paper proposes an improvement of the Modified SOS (MSOS) algorithm, called IMSOS, to enhance exploitation along with exploration strategies via a modified parasitism vector. This improves the search efficiency in finding the global minimum of two multimodal testing functions. Furthermore, the algorithm is proposed for solving inversion problems in geophysics. The performance of IMSOS was tested on the inversion of synthetic and field data sets from self-potential (SP) and vertical electrical sounding (VES) measurements. The IMSOS results were comparable to those of other global optimization algorithms, including the Particle Swarm Optimization, the Differential Evolution and the Black Holes Algorithms. IMSOS accurately determined the model parameters and their uncertainties. It can be adapted and can potentially be used to solve the inversion of other geophysical data as well.
Membrane Oxygenator for Extracorporeal Blood Oxygenation Enny Ratnaningsih; Putu T.P. Aryanti; Nurul F. Himma; Anita K. Wardani; K. Khoiruddin; Grandprix T.M. Kadja; Nicholaus Prasetya; I Gede Wenten
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.2

Abstract

Extracorporeal blood oxygenation has become an alternative to supply O2 and remove CO2 from the bloodstream, especially when mechanical ventilation provides insufficient oxygenation. The use of a membrane oxygenator offers the advantage of lower airway pressure than a mechanical ventilator to deliver oxygen to the patient’s blood. However, research and development are still needed to find appropriate membrane materials, module configuration, and to optimize hydrodynamic conditions for achieving high efficient gas transfer and excellent biocompatibility of the membrane oxygenator. This review aims to provide a comprehensive description of the basic principle of the membrane oxygenator and its development. It also discusses the role and challenges in the use of membrane oxygenators for extracorporeal oxygenation on respiratory and cardiac failure patients.
Characteristics of Polymeric Fiber Reinforced Cementitious Composite (PFRCC) under Uniaxial Compression Shwan Hussain Said; Khamees Nayyef Abdulhaleem; Ahmed Abdalhafedh Mustafa Al-Shaar
Journal of Engineering and Technological Sciences Vol. 53 No. 4 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.4.13

Abstract

This study aimed to evaluate the compressive characteristics and toughness of polymeric fiber reinforced cementitious composites (PFRCC). In the experimental program, polyvinyl alcohol (PVA) fibers were used to prepare two groups of PFRCC cylinders with different fiber contents. The main factor considered in this study was the reinforcing index. Several parameters were investigated, i.e. compressive strength, elastic modulus, strain at peak stress, Poisson’s ratio and toughness of PFRCC. The results revealed that there was a reduction in both compressive strength and elastic modulus as the reinforcing index increased, while a significant increase in the strain at peak stress was observed. Moreover, a comparison was made between different methods of toughness estimation and it was found that 7.9 was the best reinforcing index for PVA fibers  based on the energy absorption performance and ductility of PFRCC. Furthermore, an empirical model is proposed in this paper to predict the PFRCC-PVA compressive stress-strain curve. The proposed model features new formulas to calculate a number of important coefficients to plot the curve based on the reinforcing index value. Besides that, the model had good convergence compared to the experimental results, with perfect values for both variance and correlation coefficient.
Reliability Analysis of Metro Door System Based on Fuzzy Multi-State Bayesian Network Zhenliang Fu; Na Li; Xueyan Tian; Yonghua Li; Ziqiang Sheng
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.9

Abstract

Considering the shortcomings of the fault tree analysis (FTA) method in the reliability analysis of metro door systems, Bayesian network (BN) and fuzzy theory were introduced to establish the failure probability model of a metro door system. A fault tree of the metro door system was established based on the structure of the metro door, the operation data record and the practical experience of relevant engineers. The BN of the metro door system was constructed based on the fault tree. For the problem that the prior probabilities of root nodes with missing data were unavailable, fuzzy theory was introduced to convert the expert language values on these missing data nodes to corresponding prior probabilities, which were substituted into the BN along with the root nodes whose prior probabilities were obtained from the operation fault data to calculate the leaf node probability. Cause analysis of the metro door system was performed with bi-directional reasoning of BN, which provided a way to find the key factors that caused door faults and the metro door system fault probabilities.
Blending Lime with Sugarcane Bagasse Ash for Stabilizing Expansive Clay Soils in Subgrade Zalwango Teddy; Bazairwe Annette; Safiki Ainomugisha
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.10

Abstract

Expansive soils constitute one of the most frequently encountered and challenging soils to geotechnical engineers. This study assessed the possibility of utilizing sugarcane bagasse ash (SCBA) by partially replacing slaked lime to stabilize expansive clay soils. The soil samples were picked from Muduuma area, Mpigi district, Central Uganda. Experimental tests of linear shrinkage (LS), plasticity index (PI), and California Bearing Ratio (CBR) were conducted on both unstabilized soil and SCBA-lime treated samples. The SCBA-lime mixture was prepared by partially replacing 5% lime with SCBA at 2, 4, 6, 8, and 10% by weight. Hence, SCBA was used in proportions of 0.1, 0.2, 0.3, 0.4, and 0.5% by dry weight of the soil. The addition of lime greatly lowered the PI and LS, which later increased with the addition of the SCBA. The maximum dry density was generally lowered with the addition of lime and SCBA, from 1.87 g/cm3 to 1.58%. The CBR increased with SCBA-lime addition from 12% for unstabilized soil up to 48% at 6% SCBA replacement. The optimum lime replacement was established as 6% SCBA lime replacement based on CBR criteria. At the 6% optimum, the optimum moisture content (OMC) was 1.7 Mg/m3, LS was 10%, and PI was 20%. This study demonstrated the potentiality of SCBA as a novel construction material, specifically by partially reducing the usage of the unsustainable, non-environmentally friendly lime. It is also expected to enable using currently unsuitable clays from the region.
The Investigation of Machinability and Surface Properties of Aluminium Alloy Matrix Composites Priyadarsini Morampudi; Venkata Ramana V.S.N.; Koona Bhavani; Amrita M; V Srinivas
Journal of Engineering and Technological Sciences Vol. 53 No. 4 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.4.12

Abstract

Aluminum matrix composites (AMCs) are crucial to the progress of composite application areas due to their remarkable mechanical properties. Their usage has expanded into different fields such as the aerospace, automobile, and defense industries. The present study used wrought Al alloy AA6061 as the matrix, while ilmenite (FeTiO3) particles were used as reinforcement at different weight percentages to prepare metal matrix composites. One of the most economical and simple casting routes among the several available fabrication techniques for the preparation of composites is the stir casting method, which was applied in the present investigation to prepare the AMCs. The machinability of the fabricated composites and the surface roughness property after machining were studied to understand the effect of speed and feed during machining. The results showed that an increase in speed decreased the cutting forces and the surface roughness. Meanwhile, an increase in surface roughness was observed with an increase in feed.
Performance Investigation of MIMO Based CO-OFDM FSO Communication Link for BPSK, QPSK and 16-QAM under the Influence of Reed Solomon Codes Suresh Kumar; Payal Payal
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.8

Abstract

The MIMO based CO-OFDM FSO communication system is emerging as a promising approach to meet the future bandwidth requirements for seamless communication. The atmosphere being the propagation medium is a major hindrance in wide-scale acceptability of FSO technology. For seamless and error-free transmission and reception of data, a novel concept of MIMO integrated with RS code is proposed in this paper. The system performance of an RS 64 (RS (255,127)) coded MIMO-based CO-OFDM FSO communication link was investigated using BPSK, QPSK and 16-QAM under the combined effects of geometric losses, path losses and atmospheric attenuations at a hitherto un-investigated data rate of 40 Gbps and a link distance of 5 km. The modified gamma-gamma distribution was used for modeling a moderately turbulent channel. With link length varying over a range of 1 to 5 km, error correction was maximum in 16-QAM as compared to BPSK and QPSK, with 150 to 167 corrected errors. In terms of PAPR, PSK was more apt than QAM, but with a compromise in BER. The geometric losses were reduced with link length due to an increase in error correction capability for all three modulation cases, with the least losses occurring in 16-QAM. At the target bit error rate (BER), the signal to noise ratio (SNR) required for BPSK and QPSK was higher by 3.98 dB and 6.14 dB compared to 16-QAM.
LSCF-CuO as Promising Cathode for IT SOFC Ahmad Fuzamy Bin Mohd Abd Fatah; Mohamad Nazri Murat; Noorashrina A. Hamid
Journal of Engineering and Technological Sciences Vol. 53 No. 4 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.4.11

Abstract

Infiltration of copper oxide towards LSCF was done in order to enhance cathode performance due to superior properties, including high electrical conductivity and high catalytic activity for the oxygen reduction reaction. Samples were synthesized at different temperatures using the sol-gel route. The TGA results showed that LSCF achieved complete perovskite formation when calcined above 600 °C and DTA showed the formation of lattice oxygen at 550 °C. XRD analysis showed no shifted peaks and nano size levels were achieved when samples were calcined at 700 °C and 800 °C. SEM and BET showed similar analysis patterns, where the particle size increased as the calcining temperature was increased. EIS analysis further verified that the polarization resistance of the sample calcined at 700 °C was as small as 0.161 Ω, compared to 1.524 Ω with a calcination temperature of 800 °C. The activation energy of LSCF-CuO was found to be 122.2 kJ/mol, which is much lower than for conventional LSCF.
Metal-supported SOFC Fabricated by Tape Casting and Its Characterization: A Study of the Co-sintering Process Zaka Ruhma; Keiji Yashiro; Itaru Oikawa; Hitoshi Takamura; ‪Tatsuya Kawada
Journal of Engineering and Technological Sciences Vol. 53 No. 5 (2021)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2021.53.5.11

Abstract

Metal-supported SOFC consists of metallic and ceramic multilayers. Since the cell has to be flat, interaction between the layers that results in a flat sintered layer needs to be studied. The method used here was changing the starting materials through several experiments. Here, we highlight the effects of pore former in metal slurry on the sintered half-cell multilayer of a 430L metallic support, an NiO-8YSZ anode, and an 8YSZ electrolyte. The results show that by changing the amount of pore former in the 430L metal slurry changed the sinterability of the metal layer. This change of the sinterability of the metal support affected the final warpage state of the cell. This study aid in explaining the sintering phenomena between layers of metal-supported SOFCs.

Page 55 of 127 | Total Record : 1267

 53   54   55   56   57 

Filter by Year

2003 2023


Reset
Filter By Issues
All Issue Vol. 55 No. 6 (2023) Vol. 55 No. 5 (2023) Vol. 55 No. 4 (2023) Vol. 55 No. 3 (2023) Vol. 55 No. 2 (2023) Vol. 55 No. 1 (2023) Vol. 54 No. 6 (2022) Vol. 54 No. 5 (2022) Vol. 54 No. 4 (2022) Vol. 54 No. 3 (2022) Vol. 54 No. 2 (2022) Vol. 54 No. 1 (2022) Vol. 53 No. 6 (2021) Vol. 53 No. 5 (2021) Vol. 53 No. 4 (2021) Vol. 53 No. 3 (2021) Vol. 53 No. 2 (2021) Vol. 53 No. 1 (2021) Vol. 52 No. 6 (2020) Vol. 52 No. 5 (2020) Vol. 52 No. 4 (2020) Vol 52, No 3 (2020) Vol. 52 No. 3 (2020) Vol. 52 No. 2 (2020) Vol 52, No 2 (2020) Vol. 52 No. 1 (2020) Vol 52, No 1 (2020) Vol 51, No 6 (2019) Vol. 51 No. 6 (2019) Vol. 51 No. 5 (2019) Vol 51, No 5 (2019) Vol. 51 No. 4 (2019) Vol 51, No 4 (2019) Vol 51, No 3 (2019) Vol. 51 No. 3 (2019) Vol. 51 No. 2 (2019) Vol 51, No 2 (2019) Vol 51, No 2 (2019) Vol 51, No 1 (2019) Vol 51, No 1 (2019) Vol. 51 No. 1 (2019) Vol 50, No 6 (2018) Vol. 50 No. 6 (2018) Vol 50, No 6 (2018) Vol 50, No 5 (2018) Vol 50, No 5 (2018) Vol. 50 No. 5 (2018) Vol 50, No 4 (2018) Vol. 50 No. 4 (2018) Vol 50, No 4 (2018) Vol 50, No 3 (2018) Vol. 50 No. 3 (2018) Vol 50, No 3 (2018) Vol. 50 No. 2 (2018) Vol 50, No 2 (2018) Vol 50, No 2 (2018) Vol 50, No 1 (2018) Vol. 50 No. 1 (2018) Vol. 49 No. 6 (2017) Vol 49, No 6 (2017) Vol 49, No 6 (2017) Vol. 49 No. 5 (2017) Vol 49, No 5 (2017) Vol 49, No 5 (2017) Vol 49, No 4 (2017) Vol. 49 No. 4 (2017) Vol 49, No 4 (2017) Vol 49, No 3 (2017) Vol 49, No 3 (2017) Vol. 49 No. 3 (2017) Vol 49, No 2 (2017) Vol. 49 No. 2 (2017) Vol 49, No 2 (2017) Vol 49, No 1 (2017) Vol. 49 No. 1 (2017) Vol 48, No 6 (2016) Vol 48, No 6 (2016) Vol. 48 No. 6 (2016) Vol 48, No 5 (2016) Vol. 48 No. 5 (2016) Vol 48, No 5 (2016) Vol. 48 No. 4 (2016) Vol 48, No 4 (2016) Vol. 48 No. 3 (2016) Vol 48, No 3 (2016) Vol. 48 No. 2 (2016) Vol 48, No 2 (2016) Vol 48, No 1 (2016) Vol. 48 No. 1 (2016) Vol 47, No 6 (2015) Vol. 47 No. 6 (2015) Vol 47, No 5 (2015) Vol. 47 No. 5 (2015) Vol 47, No 4 (2015) Vol. 47 No. 4 (2015) Vol. 47 No. 3 (2015) Vol 47, No 3 (2015) Vol 47, No 2 (2015) Vol. 47 No. 2 (2015) Vol. 47 No. 1 (2015) Vol 47, No 1 (2015) Vol. 46 No. 4 (2014) Vol 46, No 4 (2014) Vol. 46 No. 3 (2014) Vol 46, No 3 (2014) Vol. 46 No. 2 (2014) Vol 46, No 2 (2014) Vol 46, No 1 (2014) Vol. 46 No. 1 (2014) Vol 45, No 3 (2013) Vol. 45 No. 3 (2013) Vol. 45 No. 2 (2013) Vol 45, No 2 (2013) Vol 45, No 1 (2013) Vol. 45 No. 1 (2013) Vol. 44 No. 3 (2012) Vol 44, No 3 (2012) Vol 44, No 2 (2012) Vol. 44 No. 2 (2012) Vol. 44 No. 1 (2012) Vol 44, No 1 (2012) Vol. 43 No. 3 (2011) Vol 43, No 3 (2011) Vol. 43 No. 2 (2011) Vol 43, No 2 (2011) Vol. 43 No. 1 (2011) Vol 43, No 1 (2011) Vol 42, No 2 (2010) Vol. 42 No. 2 (2010) Vol. 42 No. 1 (2010) Vol 42, No 1 (2010) Vol. 41 No. 2 (2009) Vol 41, No 2 (2009) Vol. 41 No. 1 (2009) Vol 41, No 1 (2009) Vol. 40 No. 2 (2008) Vol 40, No 2 (2008) Vol. 40 No. 1 (2008) Vol 40, No 1 (2008) Vol 39, No 2 (2007) Vol. 39 No. 2 (2007) Vol. 39 No. 1 (2007) Vol 39, No 1 (2007) Vol. 38 No. 2 (2006) Vol 38, No 2 (2006) Vol 38, No 1 (2006) Vol. 38 No. 1 (2006) Vol 37, No 2 (2005) Vol. 37 No. 2 (2005) Vol 37, No 1 (2005) Vol. 37 No. 1 (2005) Vol 36, No 2 (2004) Vol. 36 No. 2 (2004) Vol. 36 No. 1 (2004) Vol 36, No 1 (2004) Vol 35, No 2 (2003) Vol. 35 No. 2 (2003) Vol. 35 No. 1 (2003) Vol 35, No 1 (2003) More Issue