Bayu Prasetya
Department of Materials Engineering, Faculty of Industrial Technology, Institut Teknologi Sumatera (ITERA), Lampung 35365, Indonesia

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Mechanical Properties of Sugarcane Bagasse Fiber Composites: Epoxy vs Polyester Resin Matrices Prasetya, Bayu; Solafide Sipahutar, Wahyu; Andryan Prakoso, Ahmad; Fitri, Anisa
Jurnal Permadi : Perancangan, Manufaktur, Material dan Energi Vol 7 No 01 (2025): JURNAL PERMADI: PERANCANGAN, MANUFAKTUR, MATERIAL DAN ENERGI
Publisher : Universitas Nusa Putra

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52005/permadi.v7i01.186

Abstract

This study aims to evaluate the mechanical properties of sugarcane bagasse bagasse fiber-reinforced composites using two types of matrix resins (i.e epoxy and polyester). The composites were fabricated using the hand lay-up method, with sugarcane bagasse bagasse fibers serving as the natural reinforcement. The tests conducted included visual fracture analysis, tensile testing, and flexural testing. The results showed that the epoxy-based composite achieved a tensile strength of 26.43 MPa, slightly higher than the polyester-based composite at 26.06 MPa. In the flexural test, the epoxy matrix composite exhibited a flexural strength of 89.53 MPa, significantly higher than the polyester matrix at 49.12 MPa. These findings indicate that the type of matrix resin has a significant influence on the mechanical performance of natural fiber composites, particularly in applications requiring high flexural strength.
Design and Optimization of CsPbI3 Perovskite Solar Cells Using SCAPS-1D Muhamad Kevin Ristiansyah; Bayu Prasetya; Mochammad Ghulam Isaq Khan; Muhammad Yasin Siregar; Abyan Abdillah Saoloan Panjaitan; Eri Widianto; Eka Nurfani
Greensusmater Vol. 3 No. 1 (2026)
Publisher : Green and Sustainable Materials Society

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62755/gsm.2026.04

Abstract

This study investigates the optimization of CsPbI<sub>3</sub>-based perovskite solar cells using SCAPS-1D simulation with a device structure of FTO/ZnO/CsPbI<sub>3</sub>/Spiro-OMeTAD/metal. Key parameters, including absorber thickness, defect density, acceptor concentration, and transport layer properties, were systematically analyzed. The results show that absorber thickness significantly affects device performance, with an optimal thickness of 1.6 μm yielding an efficiency of 17.66%. Optimization of defect density and acceptor concentration further enhances device performance. After overall optimization, the power conversion efficiency increases from 16.3% to 23.1%, with *V*<sub>oc</sub> improving from 1.19 V to 1.39 V, *J*<sub>sc</sub> from 18.33 to 20.5 mA/cm<sup>2</sup>, and FF from 75.2% to 87.4%. The improvement is supported by enhanced J–V characteristics and near-unity quantum efficiency over a wide wavelength range. These results demonstrate that parameter optimization plays a crucial role in achieving high-performance CsPbI<sub>3</sub> perovskite solar cells.