Claim Missing Document
Check
Articles

Found 1 Documents
Search

Analisis Perbandingan Sifat Mekanik Sambungan Kampuh V Terhadap Kampuh U Hasil Pengelasan Smaw Menggunakan Posisi 3G pada Baja ST 40 Samueli Tafonao; Mukhnizar Mukhnizar; Zulkarnain Zulkarnain
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 9 No. 4 (2026): October
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v9i4.64139

Abstract

Welding is the most dominant joining technique used; the strength of a welded joint is determined not only by the type of material but also by how well the filler metal penetrates the joint gap. ST 40 steel is a material with good weldability. However, in critical structural applications, the strength of a welded joint depends not just on the base material, but on the extent to which the filler metal penetrates the joint gap. By comparing the mechanical properties of V-groove and U-groove welds, the goal is to identify the joint configuration that provides maximum strength with a low risk of failure. Tensile testing results show a tensile strength of 292.8 MPa for the U-groove weld and 322.56 MPa for the V-groove weld. Strain values ​​were 12.66% for the U-groove and 9.86% for the V-groove. Yield strength values ​​were 222.96 MPa for the V-groove and 211.44 MPa for the U-groove. Finally, the modulus of elasticity—determined via tensile testing—was 3,271.40 MPa for the V-groove weld and 2,312.80 MPa for the U-groove weld.