Claim Missing Document
Check
Articles

Found 1 Documents
Search

Analisis Pengaruh Variasi Arus Pengelasan Terhadap Kekuatan Tarik Las SMAW dengan Elektroda E7014 Pada Baja Karbon Menengah Bintang Tri Wardana; Risal Abu; Zulkarnain Zulkarnain
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 9 No. 4 (2026): October
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v9i4.64212

Abstract

Welding plays a crucial role as it determines the strength, safety, and service life of a structure. One method employed is Shielded Metal Arc Welding (SMAW). Electric current is a primary parameter affecting weld quality; an excessively low current results in insufficient penetration, while an excessively high current can reduce the tensile strength of the joint. This study aims to investigate the effect of varying current on the tensile strength of welded joints in AISI 1045 medium-carbon steel, using 3.2 mm diameter E7014 electrodes. The research was conducted by varying the current—110 A, 130 A, and 150 A—using direct current electrode positive (DCEP) polarity in the flat (downhand) welding position. The results indicate that increasing the welding current influences the tensile strength of the welded joints. The highest tensile strength was obtained at 150 A (322.09 N/mm²), while the lowest was recorded at 110 A (136.83 N/mm²); a current of 130 A yielded an intermediate value of 239.88 N/mm². This is because an increase in heat input improves both penetration and the homogeneity of the weld metal structure.