Hendriyawan, Hendriyawan
Department of Civil Engineering, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132,

Published : 6 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 6 Documents
Search

An Overview of Soil Models for Earthquake Response Analysis Yunita, Halida; Hendriyawan, H.; Apriadi, Dedi
Journal of Engineering and Technological Sciences Vol 47, No 1 (2015)
Publisher : ITB Journal Publisher, LPPM ITB

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1444.393 KB) | DOI: 10.5614/j.eng.technol.sci.2015.47.1.5

Abstract

Earthquakes can damage thousands of buildings and infrastructure as well as cause the loss of thousands of lives. During an earthquake, the damage to buildings is mostly caused by the effect of local soil conditions. Depending on the soil type, the earthquake waves propagating from the epicenter to the ground surface will result in various behaviors of the soil. Several studies have been conducted to accurately obtain the soil response during an earthquake. The soil model used must be able to characterize the stress-strain behavior of the soil during the earthquake. This paper compares equivalent linear and nonlinear soil model responses. Analysis was performed on two soil types, Site Class D and Site Class E. An equivalent linear soil model leads to a constant value of shear modulus, while in a nonlinear soil model, the shear modulus changes constantly,depending on the stress level, and shows inelastic behavior. The results from a comparison of  both soil  models  are  displayed in the form of maximum acceleration profiles and stress-strain curves.
Parametric Study of One-Dimensional Seismic Site Response Analyses Based on Local Soil Condition of Jakarta Misliniyati, Rena; Sahadewa, Andhika; Hendriyawan, Hendriyawan; Irsyam, Masyhur
Journal of Engineering and Technological Sciences Vol 51, No 3 (2019)
Publisher : ITB Journal Publisher, LPPM ITB

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (18.616 KB) | DOI: 10.5614/j.eng.technol.sci.2019.51.3.7

Abstract

Seismic site response analysis is used to estimate the response of soil deposits during seismic loading at any depth of interest and to interpret time histories as well as response spectra. This type of analysis involves many parameters that can affect the character of ground shaking. It is important to know the effect of these parameters in order to perform reliable seismic hazard evaluation at a site. This paper presents the effects of several parameters toward the characteristics of surface response spectra based on the local soil conditions of Jakarta using a one-dimensional (1-D) site response model with total stress approach. A parametric study was performed on two cohesive soil deposit profiles with a different site class, namely medium clay (site SD) and soft clay (site SE). The bedrock layers of both profiles were located at a depth of 300 m. In this study, the analytical methods implemented were the equivalent-linear method and the non-linear method. Several different dynamics soil models were also implemented. In addition, variation of property parameters, such as depth of bedrock, shear wave velocity of bedrock, layer thickness, etc., were studied. The results of this study indicate that all of the studied parameters have a significant effect on the response spectra at the ground surface.
An Overview of Soil Models for Earthquake Response Analysis Halida Yunita; H. Hendriyawan; Dedi Apriadi
Journal of Engineering and Technological Sciences Vol. 47 No. 1 (2015)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2015.47.1.5

Abstract

Earthquakes can damage thousands of buildings and infrastructure as well as cause the loss of thousands of lives. During an earthquake, the damage to buildings is mostly caused by the effect of local soil conditions. Depending on the soil type, the earthquake waves propagating from the epicenter to the ground surface will result in various behaviors of the soil. Several studies have been conducted to accurately obtain the soil response during an earthquake. The soil model used must be able to characterize the stress-strain behavior of the soil during the earthquake. This paper compares equivalent linear and nonlinear soil model responses. Analysis was performed on two soil types, Site Class D and Site Class E. An equivalent linear soil model leads to a constant value of shear modulus, while in a nonlinear soil model, the shear modulus changes constantly,depending on the stress level, and shows inelastic behavior. The results from a comparison of  both soil  models  are  displayed in the form of maximum acceleration profiles and stress-strain curves.
Parametric Study of One-Dimensional Seismic Site Response Analyses Based on Local Soil Condition of Jakarta Rena Misliniyati; Andhika Sahadewa; Hendriyawan Hendriyawan; Masyhur Irsyam
Journal of Engineering and Technological Sciences Vol. 51 No. 3 (2019)
Publisher : Institute for Research and Community Services, Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.eng.technol.sci.2019.51.3.7

Abstract

Seismic site response analysis is used to estimate the response of soil deposits during seismic loading at any depth of interest and to interpret time histories as well as response spectra. This type of analysis involves many parameters that can affect the character of ground shaking. It is important to know the effect of these parameters in order to perform reliable seismic hazard evaluation at a site. This paper presents the effects of several parameters toward the characteristics of surface response spectra based on the local soil conditions of Jakarta using a one-dimensional (1-D) site response model with total stress approach. A parametric study was performed on two cohesive soil deposit profiles with a different site class, namely medium clay (site SD) and soft clay (site SE). The bedrock layers of both profiles were located at a depth of 300 m. In this study, the analytical methods implemented were the equivalent-linear method and the non-linear method. Several different dynamics soil models were also implemented. In addition, variation of property parameters, such as depth of bedrock, shear wave velocity of bedrock, layer thickness, etc., were studied. The results of this study indicate that all of the studied parameters have a significant effect on the response spectra at the ground surface.
Proposed Site-Specific Response Spectra for Surabaya-Madura Bridge Masyhur Irsyam; Donny T. Dangkua; Hendriyawan Hendriyawan; R. Bambang Boediono; Dyah Kusumastuti; Engkon K. Kertapati
Civil Engineering Dimension Vol. 10 No. 2 (2008): SEPTEMBER 2008
Publisher : Institute of Research and Community Outreach - Petra Christian University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1049.228 KB) | DOI: 10.9744/ced.10.2.pp. 70-81

Abstract

This paper presents a site-specific seismic hazard study to determine the recommended seismic design criteria for Suramadu Bridge. The study is performed using probabilistic seismic hazard approach to determine maximum acceleration and response spectra at bedrock and followed by local site effect analysis to determine maximum acceleration and response spectra at ground surface. The probabilistic seismic hazard analysis (PSHA) is carried out using 3-dimension (3-D) seismic source models (fault source model). Two hazard levels are analysed to represent 150 and 3,300 years return period of ground motion around site location. The local site effect analysis is performed using 1-dimension (1-D) shear wave propagation theory to obtain peak ground acceleration and response spectra at ground surface. Finally, the site-specific surface response spectra with 5 percent damping are developed based on the mean plus one standard deviation concept from the result of local site effect analysis.
Making PGA hazard curve in big cities of bengkulu by using USGS PSHA modified Chintya Meidina Azwar; Arifan Jaya Syahbana; Anggun Mayang Sari; Muhammad Asrurifak; Hendriyawan Hendriyawan; Masyhur Irsyam
Indonesian Geotechnical Journal Vol. 1 No. 1 (2022): Vol.1 , No.1, April 2022
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (743.501 KB) | DOI: 10.56144/igj.v1i1.8

Abstract

The tectonic plate movement that limits the Indonesian territory causes frequent earthquakes because the plates have dynamic rocks properties with varying strengths. The collision of the plates causes fault zones, such as in Bengkulu, a region traversed by the Sumatran fault with a record of many earthquakes. The rapid growth and development of technology could support increased infrastructure development by considering earthquakes a major global hazard. Therefore, this study aimed to create a PGA hazard curve useful in improving infrastructure development in Bengkulu's big cities. Data were sourced from the Book of Indonesian Earthquake Hazard and Source 2017. The United States Geological States Probabilistic Seismic Hazard Analysis (USGS PSHA) software was modified regarding the Ground Motion Prediction Equation (GMPE) database. The GMPE used in this study are (1) BC Hydro (2012) updated for subduction source; (2) Campbel Bozorgnia (2014), Boore Atkinson (2014) and Chiou Young (2014) for shallow crustal source, and (3) Zhao et al. (2006) and Abrahamson et al. (2018) for intraslab, with 500, 1,000, 2,500, 5,000, and 10,000 years return periods. The results obtained using the new GMPE showed a change in the maximum acceleration. The Hazard Curve (HC) and PGA map showed that the Kepahiang and Lebong Districts have the highest PGA values of 1.8070 and 1.8433 g, respectively, for the 10,000 year return period. The lowest value was 0.297g recorded in Rejang Lebong for 500 year return period.