Claim Missing Document
Check
Articles

Found 9 Documents
Search

Substrate integrated waveguide bandpass filter for short range device application using rectangular open loop resonator Dian Widi Astuti; Rizki Ramadhan Putra; Muslim Muslim; Mudrik Alaydrus
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i5.pp3747-3756

Abstract

The substrate integrated waveguide (SIW) structure is the candidate for many application in microwave, terahertz and millimeter wave application. It because of SIW structure can integrate with any component in one substrate than others structure. A kind components using SIW structure is a filter component, especialy bandpass filter. This research recommended SIW bandpass filter using rectangular open loop resonator for giving more selectivity of filter. It can be implemented for short range device (SRD) application in frequency region 2.4 - 2.483 GHz. Two types of SIW bandpass filter are proposed. First, SIW bandpass filter is proposed using six rectangular open loop resonators while the second SIW bandpass filter used eight rectangular open loop resonators. The simulation results for two kinds of the recommended rectangular open loop resonators have insertion loss (S21 parameter) below 2 dB and return loss (S11 parameter) more than 10 dB. Fabrication of the recommended two kind filters was validated by Vector Network Analyzer. The measurement results for six rectangular open loop resonators have 1.32 dB for S21 parameter at 2.29 GHz while the S11 parameter more than 18 dB at 2.26 GHz – 2.32 GHz. While the measurement results has good agreement for eight rectangular open loop resonators. Its have S21 below 2.2 dB at 2.41 – 2.47 GHz and S11 16.27 dB at 2.38 GHz and 11.5 dB at 2.47 GHz.
Lowpass Filter with Hilbert Curve Ring and Sierpinski Carpet DGS Dian Widi Astuti; Intan Wahyuni; Muslim Muslim; Mudrik Alaydrus
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 16, No 3: June 2018
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v16i3.7722

Abstract

Good performance and compact size are the paramaters which are vital when desiging a filter. One of the creteria of good performance is selectivity. This research, conducted by Hilbert Curve Ring and Siepinski Carpet, is used as defected ground structure to overcome filter selectivity. By using three cascadeds Hilbert Curve Ring defected ground structure cells and three steps Sierpinski carpet, a lowpass filter is designed and fabricated. The measurement result for lowpass filterwith Hilbert Curve Ring defected ground structure has sharper selectivity with the cut off frequency at 2.173 GHz and the insertion loss value is 2.135 dB. While the measurement result for three steps Sierpinski carpet has the cut off frequency at 1.728 GHz and the insertion loss value is 0.682 dB.
Design of 2x2 Wide Bandwidth MIMO Antenna For LTE And 5G Sub-6GHz Dian Rusdiyanto; Dian Widi Astuti; Muslim Muslim; Syah Alam; Yohanes Galih Adhiyoga
JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING Vol 5, No 2 (2022): Issues January 2022
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jite.v5i2.5699

Abstract

In this study, the design of a 2X2 MIMO microstrip antenna was proposed for LTE and 5G Sub-6GHz applications. The antenna is designed to have a wide bandwidth operating in the frequency range of 2300 MHz to 3600 MHz. The antenna material uses FR4 substrate which has a dielectric constant of 4.6 and a thickness of 1.6 mm. To achieve a wide bandwidth, the ground length is cut. Meanwhile, to achieve the resonant frequency using the square slot method on the radiator element. Antenna design begins with designing a single element shape, then designing a 2x2 MIMO antenna. The results of the MIMO2x2 antenna simulation show that the reflection coefficient and isolation coefficient of each antenna are below -10 dB. The results of the reflection coefficient of each antenna show that the bandwidth achieved is more than 2 GHz. At a frequency of 2300 MHz, the lowest gain is 2.98 dBi, while the highest gain is 3.10 dBi. The lowest and highest gains at a frequency of 3600 MHz are 3.83 dBi and 3.87 dBi. Overall, this antenna has achieved the desired goal, which is to have a wide bandwidth and be able to operate on LTE and 5G applications.
Analisa Gangguan Rele Differential Busbar di GISTET 500 kV Durikosambi Jakarta Barat Miftahul Khoiri; Muslim Muslim
Jurnal Teknologi Elektro Vol 11, No 2 (2020)
Publisher : Electrical Engineering, Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/jte.2020.v11i2.002

Abstract

Tenaga listrik merupakan salah satu sumber energi yang sangat penting untuk kelangsungan hidup manusia. Keandalan sistem tenaga listrik akan menjadi prioritas utama dalam sistem penyaluran tenaga listrik dari pembangkit menuju konsumen. Gardu induk merupakan salah satu sub sistem penyaluran tenaga listrik dari tegangan ekstra tinggi menuju tegangan rendah yang kemudian disalurkan ke konsumen. Busbar merupakan bagian utama pada instalasi di Gardu Induk yang berfungsi sebagai titik pertemuan peralatan-peralatan listrik lainnya untuk menerima dan menyalurkan tenaga listrik atau daya listrik. Untuk memenuhi keandalan sistem pada Gardu Induk, tentunya pada busbar memiliki pengaman atau sistem proteksi dari gangguan. Rele proteksi busbar bekerja berdasarkan prinsip rele differential dimana membandingkan arus yang masuk dan arus keluar pada CT1 terhadap CT2. Di GISTET 500 kV Durikosambi menggunakan sistem double busbar dengan konfigurasi satu setengah PMT (3 PMT). Gangguan pada GISTET 500 kV Durikosambi terjadi pada saat manuver pemberian tegangan IBT 2 yang terhubung dengan beban sistem 500/150 kV. Gangguan terbaca fasa ke tanah yang mengakibatkan rele differential busbar bekerja. Dari hasil Analisa, rele differential busbar bekerja dikarenakan adanya pembacaan arus yang tidak seimbang sehingga mengakibatkan trip Busbar A yang terhubung dengan IBT 2
Substrate Integrated Waveguide Bandpass Filter with Complementary Split Ring Resonator at 2.45 GHz Dian Widi Astuti; Sis Yasin Darmanik; Muslim Muslim; Mudrik Alaydrus
Proceeding of the Electrical Engineering Computer Science and Informatics Vol 5: EECSI 2018
Publisher : IAES Indonesia Section

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (344.556 KB) | DOI: 10.11591/eecsi.v5.1625

Abstract

Interferences between two applications should be avoided by using a filter. At present, the miniaturized filter is one of the requirement besides good quality and low insertion loss. The sixteenth-mode substrate integrated waveguide (SMSIW) is proposed by using a complementary split-ring resonator (CSRR) to fulfill miniaturized of filter. The filter design used two of sixteenth-mode SIW (SMSIW) that reduced 15/16 of the circular regular SIW. The frequency center filter design is at 2.5 GHz. The simulation result shows insertion loss value at 0.2 dB and return loss value at 29 dB, while for the measurement result gives insertion loss value at 0.7 dB and return loss value at more than 15 dB. It shows the measurement results give good value with the simulation results.
CASCADED SQUARE LOOP BANDPASS FILTER WITH TRANSMISSION ZEROS FOR LONG TERM EVOLUTION (LTE) Iis Andini; Dian Widi Astuti; Muslim Muslim
SINERGI Vol 22, No 1 (2018)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (339.233 KB) | DOI: 10.22441/sinergi.2018.1.010

Abstract

In this paper, we present a bandpass filter that passed frequency of 1.7 GHz – 1.8 GHz. It is applied for an uplink frequency in 4G 1800MHz. This filter is created by using substrate PCB TMM-10i and has a compact size of 42 mm x 42 mm. The compact size is also important besides selectivity. The selectivity is achieved by implementing cascade square loop resonator method which generated transmission zeros. Actually, transmission zeros are obtained from the coupled resonator. The bandpass filter is designed by adding an external resonator on each square of the resonator loop and a patch to the inside of the square loop resonator. The parameter performances are simulated by HFSS. The parameter performances for return loss value is 14.24 dB at frequency 1.75 GHz and insertion loss value is 0.65 dB at frequency 1.75 GHz. By using VNA Anritsu MS 2026A, prototype bandpass filter is measured. The measurement results for return loss value is 6.8 dB and insertion loss value is 2.2 dB.
Antena Mikrostrip dengan Dua Buah U-Slot untuk Aplikasi Wi-Fi dan 5G Dian Widi Astuti; Alya Patrakomala; Muslim Muslim; Said Attamimi; Dwi Astuti Cahyasiwi
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 11 No 4: November 2022
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/jnteti.v11i4.4101

Abstract

The development of telecommunications on wireless networks is advancing very rapidly. This rapid development is caused by the need for rapid information accessible from anywhere. One of the devices on the wireless network telecommunications system is an antenna. Antennas that can work on multiple wireless network frequencies on telecommunications system devices are indispensable. Therefore, this study proposes the design of a microstrip antenna capable of simultaneously working on two wireless network frequencies, namely Wi-Fi and fifth-generation cellular telecommunications (5G). The microstrip antenna was designed using two slots, i.e., the disconnected rectangular ring and inverted U-shaped slots. The Wi-Fi and 5G frequencies working on this antenna were 2.45 GHz and 3.3 GHz. The resonant frequency on the antenna of this microstrip was affected by the slot length. The antenna was designed and fabricated using a Rogers 5880 substrate with a material’s relative permeability (er) of 2.2, a tangent loss (d) of 0.0009, and a thickness of 1.575 mm. Before being fabricated, the antenna design was simulated using the Ansys HFSS simulator, which is a simulator for designing components using electromagnetic waves including antennas. Compared to the simulation results, the results of reflection coefficient measurement in this antenna design showed excellent results for both frequencies. In the simulation results, the reflection coefficient provided a bandwidth of 123 MHz in the 2,412-2,535 MHz frequency range, while the measurement results provided a bandwidth value of 153 MHz in the 2,402-2,555 MHz frequency range for the Wi-Fi frequency application. At the 5G frequency, a measuring bandwidth of 87 MHz was obtained in the range of 3,260-3,347 MHz. The measurement results were commensurate with the simulation results, which obtained a bandwidth of 88 MHz in the range of 3,248-3,336 MHz. Therefore, the fabrication of this antenna design can be used for both applications.
Substrate Integrated Waveguide Bandpass Filter dengan Complementary Split Ring Resonator Dian Widi Astuti; Muslim Muslim; Trya Agung Pahlevi
Jurnal Rekayasa Elektrika Vol 15, No 1 (2019)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (840.703 KB) | DOI: 10.17529/jre.v15i1.12266

Abstract

Substrate integrated waveguide (SIW) is a technique to implement waveguide into microstrip material that can be applied to filter, antenna, mixer, coupler, and so on. Implementation of SIW to filter can overcome the problem of size reduction and high insertion loss commonly used in a conventional filter. While the complementary split ring resonator (CSRR) method overcomes the problem of size reduction and selectivity in conventional filters, thus combining the two can provide better filter performance. This research proposes both methods in realizing a bandpass filter by using a parameter study. Bandpass filter design works on a frequency of 3.4 – 4.6 GHz with an insertion loss value of 0.5 dB and a return loss value above 15 dB and has one transmission zeros at the frequency of 3.32 GHz. While the measurement results provide an insertion loss value below 3 dB and 6.5 dB return loss.
Substrate Integrated Waveguide Bandpass Filter dengan Complementary Split Ring Resonator Dian Widi Astuti; Muslim Muslim; Trya Agung Pahlevi
Jurnal Rekayasa Elektrika Vol 15, No 1 (2019)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v15i1.12266

Abstract

Substrate integrated waveguide (SIW) is a technique to implement waveguide into microstrip material that can be applied to filter, antenna, mixer, coupler, and so on. Implementation of SIW to filter can overcome the problem of size reduction and high insertion loss commonly used in a conventional filter. While the complementary split ring resonator (CSRR) method overcomes the problem of size reduction and selectivity in conventional filters, thus combining the two can provide better filter performance. This research proposes both methods in realizing a bandpass filter by using a parameter study. Bandpass filter design works on a frequency of 3.4 – 4.6 GHz with an insertion loss value of 0.5 dB and a return loss value above 15 dB and has one transmission zeros at the frequency of 3.32 GHz. While the measurement results provide an insertion loss value below 3 dB and 6.5 dB return loss.