Claim Missing Document
Check
Articles

Found 2 Documents
Search

Pengaruh variasi sudut terjunan terhadap unjuk kerja pompa hydram (hydraulic ram pump) R. Sutanto; K. Wardani; M. Wirawan; S. Salman
Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin Vol 9, No 1 (2019): Dinamika Teknik Mesin
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (333.251 KB) | DOI: 10.29303/dtm.v0i0.250

Abstract

Water is one of the factors which very important and necessary in the life of living creatures. Therefore, water must be available whenever and wherever in the quantity, timing, and sufficient quality. Hydraulic Ram Pump (Hydram) is a pump does not require external energy as the power source. The purposes of this research are understanding the influence of falling angle from the hydrant pump toward generated debit and finding the influence of the falling angle of the hydrant pump to generated efficiency. This research uses hydrant pump by the specification of tube compressor its’ diameter 3 inches and a height 60 cm. the falling angle of pump are 35°, 40°, 45°, 50° and 55°. The falling-height is 1 meter  with five variations of weight-lift 3, 3½, 4, 4½, and 5 meters. The method of analysis is conducted by analyzing data obtained during the experiment, where the  results in the form of quantitative data which is presented in type of  tables and displayed in graphical form. The results of the research shows that  the best output debit on falling 35 ° namely 0.079 L / s  with 3 meters’ water weight-lift, while the lowest output debit on falling 55 ° namely 0.010 L / s 5 meters’ water weight-lift. The best efficiency is 6.103% in the falling angle of  35 ° with 3 meters’ of water weight-lift, while the lowest efficiency is 1.239% in the falling angle of 55 ° with 5 meters’ of water weight-lift.
Analysis of the Effects of Shock Absorber Degradation on Vehicle Dynamic Response Using a Half-Car Model and a Fault Severity Index Based on Numerical Simulation I.M.A. Sayoga; S. Salman
Dinamika Teknik Mesin Vol 16, No 2 (2026): Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/dtm.v16i2.1346

Abstract

The suspension system plays a critical role in maintaining vehicle ride comfort, stability, and safety by attenuating vibrations induced by road surface irregularities. Progressive degradation of shock absorbers reduces damping capability, leading to significant changes in vehicle dynamic behavior. This study investigates the effects of shock absorber degradation on vehicle dynamic responses using a four-degree-of-freedom (4-DOF) half-car model and proposes a Fault Severity Index (FSI) as a quantitative indicator of suspension fault severity. Numerical simulations were conducted in MATLAB considering damping coefficient degradation levels of 0%, 25%, 50%, 75%, and 90%. The results show that increasing degradation raised RMS displacement from 0.00133 m to 0.00430 m (223%), suspension travel from 0.00170 m to 0.00482 m (184%), and dynamic tire load from 229.8 N to 543.8 N. The proposed FSI increased progressively from 0 to 183.47, enabling quantitative discrimination of suspension fault severity. Curve-fitting analysis demonstrated that the relationship between degradation and RMS displacement was better represented by a quadratic model (R² = 0.9672) than by a linear model (R² = 0.8162). The findings indicate that RMS displacement, suspension travel, dynamic tire load, and the proposed FSI are the most sensitive indicators for detecting shock absorber degradation. The proposed FSI represents the main contribution of this study and shows strong potential for vibration-based condition monitoring and predictive maintenance of automotive suspension systems.