Garuda - Garba Rujukan Digital

Low insertion loss of surface mount device low pass filter at 700 MHz Khairil Anuar Khairi; Mohd Faizal Jamlos; Surentiran Padmanathan; Mohd Aminudin Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.

Self-switching diodes as RF rectifiers: evaluation methods and current progress Nor Farhani Zakaria; Shahrir Rizal Kasjoo; Muammar Mohamad Isa; Zarimawaty Zailan; Mohd Khairuddin Md Arshad; Sanna Taking
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the advancement of the Internet of Things (IoT) applications, widespread uses and applications of devices require higher frequency connectivity to be explored and exploited. Furthermore, the size, weight, power and cost demands for the IoT ecosystems also creates a new paradigm for the hardware where improved power efficiency and efficient wireless transmission needed to be investigated and made feasible. As such, functional microwave detectors to detect and rectify the signals transmitted in higher frequency regions are crucial. This paper reviewed the practicability of self switching diodes as Radio Frequency (RF) rectifiers. The existing methods used in the evaluation of the rectification performance and cut-off frequency are reviewed, and current achievements are then concluded. The works reviewed in this paper highlights the functionality of SSD as a RF rectifier with design simplicity, which may offer cheaper alternatives in current high frequency rectifying devices for application in low-power devices.

Bandwidth and gain enhancement of a circular microstrip antenna using a DNG split ring resonator radome Ojo Rasheed; Mohd Faizal Jamlos; Ping Jack Soh; Mohd Aminudin Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

This paper present the design of a circular patch microstrip antenna with enhancement in terms of bandwidth and gain using a dielectric double negative (DNG) split ring metamaterial radome. This radome is positioned on top of the CP antenna operating from 5.2 GHz to 6.4 GHz. The metamaterial radome comprises of two alternate split rings of negative permittivity, permeability and refractive index. The circular microstrip antenna bandwidth of 430 MHz has been realized by the presence of DNG metamaterial radome compared to 220 MHz without the radome. The gain has been increased as well from 1.84 dBi to 3.87 dBi.

Gain enhancement of microstrip patch antenna using artificial magnetic conductor Norfatihah Bahari; Mohd Faizal Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 1: March 2019
Publisher : Institute of Advanced Engineering and Science

The paper presents an artificial magnetic conductor (AMC) structure to enhance the gain of the double microstrip patch antenna. By placing this kind of metamaterial in between the two Rogers RT5880 substrates, the antenna achieved lots of improvement especially in terms of size miniaturization, bandwidth, return loss, gain and efficiency. The antenna is intended to operate at 16 GHz where the prospect fifth generation (5G) spectrum might be located. Integration of AMC structure into the proposed antenna helps to improve nearly 16.3% of gain and almost 23.6% of size reduction.

Gain enhancement of microstrip patch antenna using artificial magnetic conductor Norfatihah Bahari; Mohd Faizal Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 1: March 2019
Publisher : Institute of Advanced Engineering and Science

The paper presents an artificial magnetic conductor (AMC) structure to enhance the gain of the double microstrip patch antenna. By placing this kind of metamaterial in between the two Rogers RT5880 substrates, the antenna achieved lots of improvement especially in terms of size miniaturization, bandwidth, return loss, gain and efficiency. The antenna is intended to operate at 16 GHz where the prospect fifth generation (5G) spectrum might be located. Integration of AMC structure into the proposed antenna helps to improve nearly 16.3% of gain and almost 23.6% of size reduction.

Low insertion loss of surface mount device low pass filter at 700 MHz Khairil Anuar Khairi; Mohd Faizal Jamlos; Surentiran Padmanathan; Mohd Aminudin Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.

Self-switching diodes as RF rectifiers: evaluation methods and current progress Nor Farhani Zakaria; Shahrir Rizal Kasjoo; Muammar Mohamad Isa; Zarimawaty Zailan; Mohd Khairuddin Md Arshad; Sanna Taking
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the advancement of the Internet of Things (IoT) applications, widespread uses and applications of devices require higher frequency connectivity to be explored and exploited. Furthermore, the size, weight, power and cost demands for the IoT ecosystems also creates a new paradigm for the hardware where improved power efficiency and efficient wireless transmission needed to be investigated and made feasible. As such, functional microwave detectors to detect and rectify the signals transmitted in higher frequency regions are crucial. This paper reviewed the practicability of self switching diodes as Radio Frequency (RF) rectifiers. The existing methods used in the evaluation of the rectification performance and cut-off frequency are reviewed, and current achievements are then concluded. The works reviewed in this paper highlights the functionality of SSD as a RF rectifier with design simplicity, which may offer cheaper alternatives in current high frequency rectifying devices for application in low-power devices.

Bandwidth and gain enhancement of a circular microstrip antenna using a DNG split ring resonator radome Ojo Rasheed; Mohd Faizal Jamlos; Ping Jack Soh; Mohd Aminudin Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

This paper present the design of a circular patch microstrip antenna with enhancement in terms of bandwidth and gain using a dielectric double negative (DNG) split ring metamaterial radome. This radome is positioned on top of the CP antenna operating from 5.2 GHz to 6.4 GHz. The metamaterial radome comprises of two alternate split rings of negative permittivity, permeability and refractive index. The circular microstrip antenna bandwidth of 430 MHz has been realized by the presence of DNG metamaterial radome compared to 220 MHz without the radome. The gain has been increased as well from 1.84 dBi to 3.87 dBi.

Gain enhancement of microstrip patch antenna using artificial magnetic conductor Norfatihah Bahari; Mohd Faizal Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 1: March 2019
Publisher : Institute of Advanced Engineering and Science

The paper presents an artificial magnetic conductor (AMC) structure to enhance the gain of the double microstrip patch antenna. By placing this kind of metamaterial in between the two Rogers RT5880 substrates, the antenna achieved lots of improvement especially in terms of size miniaturization, bandwidth, return loss, gain and efficiency. The antenna is intended to operate at 16 GHz where the prospect fifth generation (5G) spectrum might be located. Integration of AMC structure into the proposed antenna helps to improve nearly 16.3% of gain and almost 23.6% of size reduction.

Low insertion loss of surface mount device low pass filter at 700 MHz Khairil Anuar Khairi; Mohd Faizal Jamlos; Surentiran Padmanathan; Mohd Aminudin Jamlos; Muammar Mohamad Isa
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.

Title

Found 12 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 12 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 12 Documents
Search