Claim Missing Document
Check
Articles

Found 4 Documents
Search
Journal : Infotekmesin

Analisis Kekuatan Tarik dan Regangan Filamen Carbon Fiber Hasil 3D Print dengan Variasi Fill Density Braam Delfian Prihadianto; Suryo Darmo; Dani Anggoro Hasan; Dovan Ndaru Ananda
Infotekmesin Vol 14 No 2 (2023): Infotekmesin: Juli, 2023
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v14i2.1936

Abstract

Mechanical properties problems that are closely related to the strength of 3D printed products generally occur during the development of 3D printing machines, In which several components used are the results of additive manufacturing technology. The damages generally occur in the components that receive force and the damage is in the form of cracks and fractures. The focus of this study is to determine the effects of increasing the value of fill density on mechanical properties, especially tensile strength and strain with carbon fiber filament material. This study used an experimental method using two types of filament material: nylon carbon fiber and PLA carbon fiber with a diameter of 1.75 mm for each filament and a recommended printing temperature of 190-260°C. Both types of filaments were printed using a direct extruder type 3D printing machine with a build size of 180 mm x 180 mm x 180 mm and printing was carried out at atmospheric pressure and a horizontal printing area. The Universal Testing Machine carried out mechanical properties testing implementation related to tensile strength and strain. Based on the results of experiments and tests that have been carried out, the strain values ​​are 16.970 – 26.681% and the tensile strength is 19.244 – 23.899 MPa for nylon carbon fiber filament material. Whereas the PLA carbon fiber filament material, the strain value is 7.673 – 15.546%, and the tensile strength is 18.580 – 24.552 MPa. Therefore, based on the test results, it is known that the fill density parameter value has an influence on the strain value and tensile strength so that it can be used as a reference in setting machining parameters.
Pengaruh Besar Butir dan Temperatur Pemanasan Pasir Cetak Terhadap Sifat Mekanis Cetakan Delfian Prihadianto, Braam; Krisnaputra, Radhian; Darmo, Suryo; Prabowo, Aldi
Infotekmesin Vol 12 No 1 (2021): Infotekmesin: Januari 2021
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v12i1.471

Abstract

Casting is a manufacturing process that uses molten metal and molds to obtain a product that is closer to its final geometry. The quality of casting products is influenced by several factors and one of the important factors is the mold. The sand that is often used in making molds is resin coated sand, since this sand will bond to one another if it is heated. The research focus is determine the effects of grain size and heating temperature of resin coated sand on the mechanical properties of the mold which include compressive, shear and tensile strength. This study used an experimental method with large parameters of resin coated sand and heating temperature. From the test results, the highest compressive, shear and tensile strength values are Produced by sand with grain size less than 300 µm are identified.. The high heating temperature makes the bonds between the sands stronger and the strength value is higher..
Analisis Kekuatan Tarik dan Regangan Filamen Carbon Fiber Hasil 3D Print dengan Variasi Fill Density Prihadianto, Braam Delfian; Darmo, Suryo; Hasan, Dani Anggoro; Ananda, Dovan Ndaru
Infotekmesin Vol 14 No 2 (2023): Infotekmesin: Juli, 2023
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v14i2.1936

Abstract

Mechanical properties problems that are closely related to the strength of 3D printed products generally occur during the development of 3D printing machines, In which several components used are the results of additive manufacturing technology. The damages generally occur in the components that receive force and the damage is in the form of cracks and fractures. The focus of this study is to determine the effects of increasing the value of fill density on mechanical properties, especially tensile strength and strain with carbon fiber filament material. This study used an experimental method using two types of filament material: nylon carbon fiber and PLA carbon fiber with a diameter of 1.75 mm for each filament and a recommended printing temperature of 190-260°C. Both types of filaments were printed using a direct extruder type 3D printing machine with a build size of 180 mm x 180 mm x 180 mm and printing was carried out at atmospheric pressure and a horizontal printing area. The Universal Testing Machine carried out mechanical properties testing implementation related to tensile strength and strain. Based on the results of experiments and tests that have been carried out, the strain values ​​are 16.970 – 26.681% and the tensile strength is 19.244 – 23.899 MPa for nylon carbon fiber filament material. Whereas the PLA carbon fiber filament material, the strain value is 7.673 – 15.546%, and the tensile strength is 18.580 – 24.552 MPa. Therefore, based on the test results, it is known that the fill density parameter value has an influence on the strain value and tensile strength so that it can be used as a reference in setting machining parameters.
Analisis Desain Boom, Arm, dan Bucket Alat Peraga Mini Excavator Zhugimada dengan Metode Elemen Hingga Prihadianto, Braam Delfian; Darmo, Suryo; Anggoro Hasan, Dani; Nur Esa, Suhada
Infotekmesin Vol 15 No 1 (2024): Infotekmesin: Januari, 2024
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v15i1.2124

Abstract

An excavator is heavy equipment with a hydraulic system as the main drive and along with its uses, many parties have developed it as a means of production and as a means of learning. The education world needs excavators as learning tools and practice media are currently constrained by price when commercial units are used. Therefore, a learning media that is more compact but does not abandon the main essence of learning is needed. This research aims to analyze the front attachment design of the Zhugimada mini excavator using the finite element method. The research was carried out using the ANSYS application for the static load simulation process and testing was carried out with a bucket containing sand weighing 25 kg and using three hydraulic cylinders. The simulation results show that the maximum von Mises stress value in the bucket component is 43.226 MPa and the maximum deformation is 0,51285 mm in the tooth bucket so in general the design of the Zhugimada mini excavator front attachment components can be declared safe and can be continued in the fabrication process.