Claim Missing Document
Check
Articles

Found 8 Documents
Search

PENGARUH KETINGGIAN DI ATAS TANAH DAN JARAK DARI EMPULUR TERHADAP BERAT JENIS DAN KADAR AIR KAYU AFRIKA (KHAYA ANTHOTHECA C.DC.) Suparman Nurwati; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 5, No 6 (1988): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jphh.1988.5.6.315-320

Abstract

Khaya anthotheca  C.DC. is  one  of  exotic tree  species  selected   for   trial planting   in  Indonesia   by  the  Forest Research  Institute,   about  25 years  ago.This  paper discusses   the   result  of  a   laboratory   study   on   the  variation  of  wood   moisture content and  air dry specific   gravity   within   and  between  trees,  the  effects   of  height   from   the  ground  and  distance   from  pith   outward   on these  two  properties.   The  material for the  study   consisted   of  three  20  year  old  trees  of  Khaya  anthotheca  C.DC.  with  diameters   at breast  height  ranging from  38 - 41 cm, height  (until  top)  15 - I 7 m and clear bole length  from 9 -  9.5  meters.  The  trees were   felled  on plantation  site  at Cikole  (North  of  Bandung)   on  the  slope  of Mount Tangkuban  Perahu,  and  transported to  Bogor  for  laboratory testing.The  result  of  statistical   analyses  reveal,  non  significant   differences between trees  and  bolts  within   trees  for  air dry  specific  gravity,  and significant  difference   in the property   from  pith  outward.The  green   (fresh)  moisture  contents   on  the  other  hand  between   bolts  and  distance   from  pith  are significantly different. Regressions  relating the two properties  (air dry specific  gravity  and moisture  content)  as dependent variables with respective distance from pith   outward   being  1/3, 2/3, and  3/3  of the  radius,  and height  of  bolt  0.2, 2.7, 5.2, and 7.7 meters  above  the ground  as independent variables show  the following  :(1).S  =  0.436  -  0.017Z  +  0.003 Z2                                       =  (R=0.536)                       (Z =Height,   S =Specific gravity)(2).A =  99.98  -   3.591Z  + 0.224 Z2                                        = (R=0.466)                    (Z = Height,  A  = Moisture  content)(3).S =  0.396  + 0.018   X  + 0.044X2                                      =  (R=0.510) (4).A=  86.79  -   1.495  x   + 4.25X2                                         =  (R=0.101)               (X = distance  from  pith  outward)Test  of  significance  of  the  regression coeficient   (Table  4)  indicate  significant  F values for  the  first  two  equations (effect  of height)  and non significant  results for  the last two equations (effect  of distance  from pith).
PENGARUH UMUR DAN POSIS! DALAM POHON TERHADAP BEBERAPA SIFAT FISIS KAYU Suparman Karnasudirdja; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 6, No 1 (1989): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (6387.04 KB) | DOI: 10.20886/jphh.1989.6.1.40- 47

Abstract

Pinus  merkusii   or locally   known  as Tusam,   is one of the plantation  species  extensively   cultiuated  in the uarious part of  Indonesia.    The  uses  of  its  wood  uary  from  chopstick   and  ice cream  spoon  to some  construction   item  such  as trans- mission pole,  and a possible  use of  its wood  for cooling  tower is still being studied.The paper  describes  study   result  of  the  effect  of  tree  age  and  position   within   tree  on  some  physical  properties   (Specific grauity,   moisture  content,   uolumetric  shrinkage   and fiber saturation  point).   The  results  were computed  using  the nested  or hierarchical  classification  analysis,  and  the differences   between  means  tested  using  Tukey's  w procedure.The  results  shows  that  the tree  age effect  significantly   the green and air-dry  specific gravity,   The other properties do not  seem  to  be affected. Between  tree differences   affect  significantly    the air-dry  moisture  content  only.  Height  within  tree does  affect  uery  significantly   the  uolumetric   shrinkage  from  green  to ouen dry  condition;  and from  air-dry  to ouen  dry condition.   The ouerall  mean and standard deviation  ualues for each  property   had been calculated  and  the  result  presented.
KARAKTERISTIK DOLOK DAN SIFAT PENGGERGAJIAN KAYU SAWIT (Elaeis guineensis Jacq.) Achmad Supriadi; Osly Rachman; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 17, No 1 (1999): Buletin Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4537.67 KB) | DOI: 10.20886/jphh.1999.17.1.1-20

Abstract

Kayu  sawit  merupakan  salah  satu  komoditas  dari limbah perkebunan yang  mempunyai potensi  untuk  menambah pasokan  kayu  bundar di  Indonesia. Penelitian  ini bertujuan  untuk menyediakan informasi tentang sifat fisis  (kerapatan, kadar air dan kerapatan ikatan pembuluh), dimensi dolok dan  rendemen penggergajian kayu sawit. Untuk maksud itu diteliti sebanyak 9 dolok dari pohon  sawit yamg berasal dari tanaman perkebunan di Lampung.Kerapatan kayu sawit berkisar antara 0,21 sampai 0,41  g/cm3.  Kadar air basah berkisar antara 138,90 sampai 343, 69%. Kerapatan ikatan pembuluh berkisar antara 0,84 sampai 1,01 bh/mm2.  Posisi  kayu  dalam  arah transversal  berpengaruh  nyata  terhadap  ketiga  sifat fisis tersebut.Diameter rata-rata dolok termasuk kulit adalah 46,64 cm,  tanpa kulit 42,55 cm, diameter bagian medium dan lunak 24,54 cm.  Volume rata-rata dolok untuk tiap meter panjang dengan kulit adalah 0,1745 m3,  tanpa kulit 0,1456 m3, bagian keras 0,0988  m3, bagian medium 0,0288 m3 dan  bagian  lunak  0,019  m3.  Mutu dolok  menunjukan kebundaran  di atas  95% dengan  pengurangan    diameter  rata-rata  2,61 cm/m.  Rendemen  penggergajian  rata-rata  adalah  44%, terdiri  dari bagian    keras   31%,  bagian  medium  9%  dan bagian  lunak  4%  serta  limbah penggergajian  sebesar    56%. Posisi  dolok  dalam  arah  vertikal  batang  berpengaruh   nyata terhadap  rendemen penggergajian.Berdasarkan  kerapatan,  bagian  keras  batang  kayu  sawit   termasuk   kelas  kuat  IV.   Bagian medium  dan   lunak   termasuk  kelas  kuat V, sehingga  bagian  keras  batang  dapat     digunakan sebagai  bahan  konstruksi  ringan  seperti  mebel. Berdasarkan  bagian  keras  ini  tersedia  potensi kayu  sebanyak  2,8 juta  m3/tahun yang berasal dari penebangan pohon sawit tua.
PENERAPAN MODEL SIMULASI PENGGERGAJIAN PADA DOLOK HASIL PENJARANGAN HTI UNTUK MENINGKATKAN RENDEMEN DAN PRODUKSI PAPAN SAMBUNG Achmad Supriadi; Osly Rachman; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 17, No 1 (1999): Buletin Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4448.467 KB) | DOI: 10.20886/jphh.1999.17.1.40-56

Abstract

Kayu hasil penjarangan Hutan  Tanaman Industri  (HTI)  mempunyai ciri yang  khas yaitu berdiameter  kecil,  sehingga proses  penggergajiannya  menghasilkan  rendemen papan  yang rendah dan berukuran sempit. Untuk meningkatkan rendemen, maka dalam  penggergajian  akan diterapkan model simulasi penggergajian, dan hasil penggergajian sebenamya  dibandingkan dengan pola konvensional. Penelitian menggunakan dua jenis kayu hasil penjarangan, yaitu leda (Eucalyptus deglupta Bl.) dan damar (Agathis loranthifolia).Rendemen papan dengan penerapan pola simulasi dan pola konvensional untuk kayu leda masing-masing adalah 55,99% dan 53,37%, sedangkan untuk kayu damar adalah 58,33% dan 55, 24%. Pembelahan  papan dari masing-masing pola tersebut menjadi bilah untuk bahan papan sambung menghasilkan rendemen yang  tidak berbeda nyata. Rendemen bilah pola simulasi dan pola konvensional untuk kayu leda masing-masing adalah 52,59% dan 49,90%, sedangkan untuk kayu damar  adalah  54,01%  dan 51,43%. Papan sambung yang dibuat dari kayu leda, damar dan campuran keduanya, hanya yang dari kayu damar dan campuran leda dan  damar saja yang memenuhi syarat Standar Indonesia untuk kayu bangunan non struktural.
PENGARUH KETINGGIAN DI ATAS TANAH DAN JARAK DARI EMPULUR TERHADAP BERAT JENIS DAN KADAR AIR KAYU AFRIKA (KHAYA ANTHOTHECA C.DC.) Suparman Nurwati; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 5, No 6 (1988): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jphh.1988.5.6.315-320

Abstract

Khaya anthotheca  C.DC. is  one  of  exotic tree  species  selected   for   trial planting   in  Indonesia   by  the  Forest Research  Institute,   about  25 years  ago.This  paper discusses   the   result  of  a   laboratory   study   on   the  variation  of  wood   moisture content and  air dry specific   gravity   within   and  between  trees,  the  effects   of  height   from   the  ground  and  distance   from  pith   outward   on these  two  properties.   The  material for the  study   consisted   of  three  20  year  old  trees  of  Khaya  anthotheca  C.DC.  with  diameters   at breast  height  ranging from  38 - 41 cm, height  (until  top)  15 - I 7 m and clear bole length  from 9 -  9.5  meters.  The  trees were   felled  on plantation  site  at Cikole  (North  of  Bandung)   on  the  slope  of Mount Tangkuban  Perahu,  and  transported to  Bogor  for  laboratory testing.The  result  of  statistical   analyses  reveal,  non  significant   differences between trees  and  bolts  within   trees  for  air dry  specific  gravity,  and significant  difference   in the property   from  pith  outward.The  green   (fresh)  moisture  contents   on  the  other  hand  between   bolts  and  distance   from  pith  are significantly different. Regressions  relating the two properties  (air dry specific  gravity  and moisture  content)  as dependent variables with respective distance from pith   outward   being  1/3, 2/3, and  3/3  of the  radius,  and height  of  bolt  0.2, 2.7, 5.2, and 7.7 meters  above  the ground  as independent variables show  the following  :(1).S  =  0.436  -  0.017Z  +  0.003 Z2                                       =  (R=0.536)                       (Z =Height,   S =Specific gravity)(2).A =  99.98  -   3.591Z  + 0.224 Z2                                        = (R=0.466)                    (Z = Height,  A  = Moisture  content)(3).S =  0.396  + 0.018   X  + 0.044X2                                      =  (R=0.510) (4).A=  86.79  -   1.495  x   + 4.25X2                                         =  (R=0.101)               (X = distance  from  pith  outward)Test  of  significance  of  the  regression coeficient   (Table  4)  indicate  significant  F values for  the  first  two  equations (effect  of height)  and non significant  results for  the last two equations (effect  of distance  from pith).
PENGARUH UMUR DAN POSIS! DALAM POHON TERHADAP BEBERAPA SIFAT FISIS KAYU Suparman Karnasudirdja; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 6, No 1 (1989): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jphh.1989.6.1.40- 47

Abstract

Pinus  merkusii   or locally   known  as Tusam,   is one of the plantation  species  extensively   cultiuated  in the uarious part of  Indonesia.    The  uses  of  its  wood  uary  from  chopstick   and  ice cream  spoon  to some  construction   item  such  as trans- mission pole,  and a possible  use of  its wood  for cooling  tower is still being studied.The paper  describes  study   result  of  the  effect  of  tree  age  and  position   within   tree  on  some  physical  properties   (Specific grauity,   moisture  content,   uolumetric  shrinkage   and fiber saturation  point).   The  results  were computed  using  the nested  or hierarchical  classification  analysis,  and  the differences   between  means  tested  using  Tukey's  w procedure.The  results  shows  that  the tree  age effect  significantly   the green and air-dry  specific gravity,   The other properties do not  seem  to  be affected. Between  tree differences   affect  significantly    the air-dry  moisture  content  only.  Height  within  tree does  affect  uery  significantly   the  uolumetric   shrinkage  from  green  to ouen dry  condition;  and from  air-dry  to ouen  dry condition.   The ouerall  mean and standard deviation  ualues for each  property   had been calculated  and  the  result  presented.
KARAKTERISTIK DOLOK DAN SIFAT PENGGERGAJIAN KAYU SAWIT (Elaeis guineensis Jacq.) Achmad Supriadi; Osly Rachman; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 17, No 1 (1999): Buletin Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jphh.1999.17.1.1-20

Abstract

Kayu  sawit  merupakan  salah  satu  komoditas  dari limbah perkebunan yang  mempunyai potensi  untuk  menambah pasokan  kayu  bundar di  Indonesia. Penelitian  ini bertujuan  untuk menyediakan informasi tentang sifat fisis  (kerapatan, kadar air dan kerapatan ikatan pembuluh), dimensi dolok dan  rendemen penggergajian kayu sawit. Untuk maksud itu diteliti sebanyak 9 dolok dari pohon  sawit yamg berasal dari tanaman perkebunan di Lampung.Kerapatan kayu sawit berkisar antara 0,21 sampai 0,41  g/cm3.  Kadar air basah berkisar antara 138,90 sampai 343, 69%. Kerapatan ikatan pembuluh berkisar antara 0,84 sampai 1,01 bh/mm2.  Posisi  kayu  dalam  arah transversal  berpengaruh  nyata  terhadap  ketiga  sifat fisis tersebut.Diameter rata-rata dolok termasuk kulit adalah 46,64 cm,  tanpa kulit 42,55 cm, diameter bagian medium dan lunak 24,54 cm.  Volume rata-rata dolok untuk tiap meter panjang dengan kulit adalah 0,1745 m3,  tanpa kulit 0,1456 m3, bagian keras 0,0988  m3, bagian medium 0,0288 m3 dan  bagian  lunak  0,019  m3.  Mutu dolok  menunjukan kebundaran  di atas  95% dengan  pengurangan    diameter  rata-rata  2,61 cm/m.  Rendemen  penggergajian  rata-rata  adalah  44%, terdiri  dari bagian    keras   31%,  bagian  medium  9%  dan bagian  lunak  4%  serta  limbah penggergajian  sebesar    56%. Posisi  dolok  dalam  arah  vertikal  batang  berpengaruh   nyata terhadap  rendemen penggergajian.Berdasarkan  kerapatan,  bagian  keras  batang  kayu  sawit   termasuk   kelas  kuat  IV.   Bagian medium  dan   lunak   termasuk  kelas  kuat V, sehingga  bagian  keras  batang  dapat     digunakan sebagai  bahan  konstruksi  ringan  seperti  mebel. Berdasarkan  bagian  keras  ini  tersedia  potensi kayu  sebanyak  2,8 juta  m3/tahun yang berasal dari penebangan pohon sawit tua.
PENERAPAN MODEL SIMULASI PENGGERGAJIAN PADA DOLOK HASIL PENJARANGAN HTI UNTUK MENINGKATKAN RENDEMEN DAN PRODUKSI PAPAN SAMBUNG Achmad Supriadi; Osly Rachman; Edi Sarwono
Jurnal Penelitian Hasil Hutan Vol 17, No 1 (1999): Buletin Penelitian Hasil Hutan
Publisher : Pusat Penelitian dan Pengembangan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jphh.1999.17.1.40-56

Abstract

Kayu hasil penjarangan Hutan  Tanaman Industri  (HTI)  mempunyai ciri yang  khas yaitu berdiameter  kecil,  sehingga proses  penggergajiannya  menghasilkan  rendemen papan  yang rendah dan berukuran sempit. Untuk meningkatkan rendemen, maka dalam  penggergajian  akan diterapkan model simulasi penggergajian, dan hasil penggergajian sebenamya  dibandingkan dengan pola konvensional. Penelitian menggunakan dua jenis kayu hasil penjarangan, yaitu leda (Eucalyptus deglupta Bl.) dan damar (Agathis loranthifolia).Rendemen papan dengan penerapan pola simulasi dan pola konvensional untuk kayu leda masing-masing adalah 55,99% dan 53,37%, sedangkan untuk kayu damar adalah 58,33% dan 55, 24%. Pembelahan  papan dari masing-masing pola tersebut menjadi bilah untuk bahan papan sambung menghasilkan rendemen yang  tidak berbeda nyata. Rendemen bilah pola simulasi dan pola konvensional untuk kayu leda masing-masing adalah 52,59% dan 49,90%, sedangkan untuk kayu damar  adalah  54,01%  dan 51,43%. Papan sambung yang dibuat dari kayu leda, damar dan campuran keduanya, hanya yang dari kayu damar dan campuran leda dan  damar saja yang memenuhi syarat Standar Indonesia untuk kayu bangunan non struktural.