Claim Missing Document
Check
Articles

Found 4 Documents
Search

PERILAKU BALOK KASTELA BENTANG PENDEK DENGAN VARIASI BUKAAN CIRCULAR, DIAMOND DAN HEXAGONAL MENGGUNAKAN METODE ELEMEN HINGGA Muhtarom, Ahmad; Idris, Yakni; Welly, Welly
CANTILEVER Vol 7, No 1 (2018): Cantilever
Publisher : Jurusan Teknik Sipil dan Perencanaan Fakultas Teknik Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (451.578 KB) | DOI: 10.35139/cantilever.v7i1.59

Abstract

Opening modification of castellated beam now has varied including circular, diamond and hexagonal, in the selection of openings required data behavior as the basis of planning according to the desired conditions. The purpose of this study is to know the behavior of short-span castellated beam with variations of circular, diamond and hexagonal openings using finite element method. The geometry of the 1 meter span castellated beam used 225x75x7x5 mm. The method used to create a numerical model castellated beam with circular openings that are analyzed using finite element method then verified with experimental model results with geometry, material and loading the same. After the numerical model result closer to the experimental model, then created 5 variations of the geometry of numerical model openings for each variations. The results showed that the variation in the height and width of the same openings in the three types of openings obtained for the circular opening beams have greater deflection than the others because of the larger holes ratio. For diamond opening beams, the ultimate load is greater than the other because the ratio of the smaller holes ratio and for the hexagonal opening beams has the smallest deflection and stress than the others.
ANALISIS STRUKTUR GEDUNG BERTINGKAT MENGGUNAKAN KOMBINASI SISTEM STRUKTUR FRAME TUBE DAN WAFFLE SLAB Faiz Sulthan; Hanafiah Hanafiah; Yakni Idris
Simposium II UNIID 2017 Vol 2 (2017)
Publisher : Simposium II UNIID 2017

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (710.127 KB)

Abstract

Fungsi utama dari sistem struktur adalah untuk memikul secara aman dan efektif beban yang bekerja pada bangunan, baik itu beban vertikal ataupun beban horisontal. Untuk mengurangi lendutan vertikal akibat beban vertikal pada struktur gedung bentang lebar digunakanlah sistem struktur lantai dengan balok grid yang disebut juga dengan struktur lantai pelat berusuk (waffle slab), dan untuk mengurangi lendutan horisontal atau simpangan lateral pada struktur gedung bertingkat digunakan sistem struktur yang bekerja untuk menahan gaya lateral, salah satunya adalah sistem struktur rangka tabung (frame tube). Tujuan dari penelitian ini adalah untuk mengetahui kinerja struktur gedung bertingkat berdasarkan nilai simpangan lateral, dan story drift pada kombinasi sistem struktur frame tube dan waffle slab. Model gedung yang menjadi objek penelitian adalah gedung bertingkat dengan struktur beton bertulang yang memiliki 8 lantai dengan tinggi tiap lantai sama. Model gedung terdiri dari 4 model, yaitu model 1 adalah sistem rangka biasa dengan waffle slab tanpa balok pengikat, model 2 adalah sistem frame tube dengan waffle slab tanpa balok pengikat, model 3 adalah sistem rangka biasa dengan waffle slab dan balok pengikat, dan model 4 adalah sistem frame tube dengan waffle slab dan balok pengikat. Hasil penelitian ini antara lain; penggunaan frame tube dapat mengurangi nilai simpangan lateral pada sistem waffle slab yaitu dari nilai simpangan lateral maksimum sebesar 128,90 mm menjadi 81,53 mm dengan persentase pengurangan sebesar 36,7%. Penggunaan kombinasi frame tube dengan balok pengikat pada sistem waffle slab dapat mengurangi simpangan lateral maksimum sebesar 128,90 mm menjadi 61,54 mm dengan persentase pengurangan yaitu sebesar 52,3%.
ANALISIS KEKUATAN MENARA BTS TIPE SST KAKI EMPAT TERHADAP PENAMBAHAN ANTENA PARABOLA (STUDI KASUS MENARA BTS DI KABUPATEN OGAN ILIR) Ahmad Muhtarom; Yakni Idris; Merantia Limas
Simposium II UNIID 2017 Vol 2 (2017)
Publisher : Simposium II UNIID 2017

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (763.342 KB)

Abstract

Seiring dengan peningkatan kebutuhan teknologi telekomunikasi dan kepatuhan terhadap regulasi menara bersama maka penyedia layanan telekomunikasi berusaha memanfaatkan menara yang sudah ada untuk menambah antena pemancar yang baru. Penulis melakukan penelitian pada tiga menara BTS tipe SST kaki empat di Kabupaten Ogan Ilir dengan tinggi 42 meter, 52 meter dan 72 meter. Metode pertama adalah menganalisis kekuatan existing masing-masing menara mengacu standar TIA/EIA-222-F dengan empat syarat batas, yaitu perpindahan horizontal di bawah H/200, putaran dan goyangan di bawah 0,5° serta rasio tegangan di bawah 1. Jika syarat batas bisa dipenuhi maka dilanjutkan ke metode kedua yaitu menganalisis kekuatan menara dengan penambahan antena pemancar jenis parabola berdiameter 2 meter sampai batas izin. Hasil analisis metode pertama didapatkan bahwa menara dengan tinggi 42 meter dan 72 meter memenuhi keempat syarat batas sedangkan menara dengan tinggi 52 m ada elemen yang tidak memenuhi 1 syarat batas karena rasio tegangan 1,271 (>1). Hasil dari metode kedua didapatkan menara dengan tinggi 42 meter dapat ditambahkan antena parabola maksimum 10 buah, dan menara dengan tinggi 72 meter maksimum 18 buah. Hasil penelitian merekomendasikan penambahan antena parabola baru pada menara dengan tinggi 42 meter dan 72 meter saja.
Sifat Fisis Tanah Lempung Ekspansif yang Disubstitusi dengan Serbuk Limbah Keramik: Physical Properties of Expansive Clay Substituted with Ceramic Waste Powder Dewi, Ratna; Idris, Yakni; San, Indra Chusaini; Lien DYN; Putri Tisya R
Cantilever: Jurnal Penelitian dan Kajian Bidang Teknik Sipil Vol. 11 No. 2 (2022): Cantilever
Publisher : Department of Civil Engineering and Planning, Faculty of Engineering, Sriwijaya University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35139/cantilever.v11i2.118

Abstract

Expansive soils have high compressibility, swelling, and shrinkage properties. So we need an effective method to improve soil conditions when the structure is built on it. This paper presents the results of research on the effect of the substitution of ceramic waste on the physical properties of the expansive soil. Soil improvement using construction waste will contribute to reducing the amount of waste and conserving natural resources. The stages of the research included testing the physical properties of both soil and waste materials, then testing the physical properties of the mixed soil which included the Atterberg limit test, soil compaction test, and SEM test. The addition of ceramic waste powder can function as a material that can chemically change the physical properties of the soil. There was a decrease in the optimum water content (wopt) of the soil and an increase in the maximum dry density (gd max) value of the soil along with the addition of the percentage of ceramic waste powder that was up to 1.410 gr/cm3. The percentage of chemical content (SiO2 and Al2O3) in ceramic powder affects soil compaction parameters and decreases soil plasticity index, where the content of SiO2 and Al2O3 in ceramic powder 1 is higher than ceramic powder 2 giving lower IP (Index Plasticity) values and optimum moisture content, respectively by 16.26 and 28%, and a higher maximum dry density value of 14.4 gr/cm3.