Article Per Year (5 Year)
p-Index From 2020 - 2025
0.835
P-Index
This Author published in this journals
All Journal Aceh International Journal of Science and Technology JURNAL REKAYASA KIMIA & LINGKUNGAN
Abrar Muslim
Department of Chemical Engineering, Faculty of Engineering, Universitas Syiah Kuala, Indonesia
Agriculture, Biological Sciences & Forestry Chemical Engineering, Chemistry & Bioengineering Control & Systems Engineering Decision Sciences, Operations Research & Management Earth & Planetary Sciences Energy Engineering

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
Bentonite and Magnetite Filler-Modified Polyurethane Foam in Fixed Bed Column for the Adsorption of Mercury(II) Ions from Aqueous Solution Siti Sarah; Adisalamun Adisalamun; Darmadi Darmadi; Suraiya Kamaruzzaman; Abrar Muslim; Saiful Saiful
Aceh International Journal of Science and Technology Vol 10, No 1 (2021): April 2021
Publisher : Graduate Program of Syiah Kuala University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (535 KB) | DOI: 10.13170/aijst.10.1.18890

Abstract

This paper proposed adsorbent development by synthesizing polyurethane foam (PUF) using a simple method, mixing polyol with isocyanate and adding fillers of bentonite and magnetite to the PUF matrix. The study's main objective was to produce a PUF-based adsorbent with high reactivity to remove Hg2+ in wastewater. This bentonite and magnetite filler-modified polyurethane foam (BMPUF) adsorbent was fixed in a bed column for the adsorption of mercury (II) ions from an aqueous solution. The effect of initial Hg2+ concentration on the removal rate and the effect of contact time on adsorption efficiency was investigated. Langmuir, Freundlich, and BET non-linear models were taken into account to determine the best adsorption isotherm fitting and obtain adsorption capacity, intensity, and pore volume. As a result, it followed the non-linear Freundlich model, and the average adsorption capacity and intensity were 0.466 mg/g and 0.923, respectively. The average BET-based pore volume obtained was 0.782 L/mg. The kinetics study showed that the non-linear pseudo-first-order kinetics model was more suitable for describing the Hg2+ adsorption kinetics. The maximum equilibrium adsorption capacity was 1.770 mg/g with the adsorption rate of 0.0013 min-1 based on the non-linear model. The effect of varying bentonite and magnetite ratio on adsorption isotherm and kinetics was also investigated. Overall, the potential application of BMPUF adsorbent in the adsorption of mercury (II) ions was demonstrated in the current study. 
Biosorbent Prepared from Calotropis Gigantean Stems for Adsorption of Cu(II) Ions from Aqueous Solution Asmaul Husna; Faisal Abdullah; Abrar Muslim; Suhendrayatna Suhendrayatna; Hesti Meilina
Jurnal Rekayasa Kimia & Lingkungan Vol 16, No 1 (2021): Jurnal Rekayasa Kimia & Lingkungan (June, 2021)
Publisher : Chemical Engineering Department, Syiah Kuala University, Banda Aceh, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23955/rkl.v16i2.18677

Abstract

Calotropis gigantea stems (CGS) has the potential to use as biosorbent for adsorption of Cu(II) ions. In this study, the CGS biosorbent (CGSB) was prepared by drying and grounding. The effect of independent variables on adsorption capacity were investigated. As the result, the maximum adsorption capacity of 53.457 mg/g was obtained the optimal condition which was initial Cu(II) ions concentration of 567.47 mg/L, CGSB size of less than 230 mesh, CGSB mass of 1 g, temperature of 27 oC, pH 5, and contact time of 60 min. The CGSB surface morphology was analysed using SEM. The adsorption of Cu(II) ions fitted well with pseudo first-order adsorption kinetic (PFO-AK) model (R2=0.99), and the PFO-AK adsorption capacity and rate constant obtained were 70.194 mg/g and 0.0877 g/mg.min, respectively. The adsorption isotherm of Cu(II) ions was in accordance with Freundlich model (R2=0.99), and the intensity and volume constants attained were 0.876 and 1.017 L/mg, respectively. This result showed that physical adsorption occurred dominantly than chemical adsorption. The application of CGSB on the wastewater of initial Cu(II) ions concentration of 389.31 mg/L from ex-mine pool of acid mine drainage (AMD) in Jantang village, Lhoong District, Aceh Besar, Aceh Province resulted in adsorption capacity of 37.52 mg/g with adsorption efficiency of 66.13%.
Co-Authors - Darmadi Adisalamun Adisalamun Asmaul Husna Faisal Abdullah Hesti Meilina Saiful Saiful Saiful Saiful Siti Sarah Suhendrayatna Suhendrayatna Suraiya Kamaruzzaman