Noviarty Noviarty
Unknown Affiliation

Published : 12 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 12 Documents
Search

KARAKTERISASI TERMAL PEB U-7Mo/Al SEBAGAI BAHAN BAKAR REAKTOR RISET Sayyidatun Nisa; Ariyanti Saputri; Sutri Indaryati; Noviarty Noviarty; Supardjo; Aslina Br. Ginting
Urania: Jurnal Ilmiah Daur Bahan Bakar Nuklir Vol. 27 No. 2 (2021): Urania : Jurnal Ilmiah Daur Bahan Bakar Nuklir
Publisher : Badan Riset dan Inovasi Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/urania.2021.27.2.6420

Abstract

UMo/Al-based fuel is a candidate for research reactor fuel and as an alternative to U3Si2/Al fuel. This is because the UMo/Al alloy has a higher uranium density of 16.4 g/cm3 compared to U3Si2/Al of 12.2 g/cm3. In addition, the UMo alloy has a low neutron absorption cross section and its reprocessing process is relatively easy. The U-7Mo/Al alloy is able to maintain the γ-U phase during irradiation process so that the stability of the fuel in the reactor is maintained. The U-7Mo alloy has been fabricated into a U-7Mo/Al mini fuel element plate. The purpose of this study was to determine the thermal characteristics of U-7Mo/Al as inputs to the research reactor fuel fabricator in the manufacture of UMo/Al-based fuel. Thermal characterization was carried out for uranium, molybdenum, UMo and the fuel element plate of U-7Mo/Al using Differential Scanning Calorimetry (DSC). The thermal characterization results show that the U-7Mo/Al fuel element plate is thermally stable up to 600 °C because it undergoes an endothermic thermochemical reaction at a temperature of 632.962 °C with DH = 144.318 J/g. At 656.186 °C, the Al matrix and AlMg2 cladding are fused in the U-7Mo/Al with DH = 144.318 J/g. At temperatures of 952.810 °C to 1106.050 °C, the molten Al matrix diffuses with UMo to form a metastable U(Mo,Al)X compound and heating to a temperature of 1211.760 °C forms a UAlX layer (UAl2, UAl3 and UAl4) with DH = –22,721 J/g.
PEMISAHAN DAN ANALISIS 137Cs DARI LARUTAN PELAT ELEMEN BAKAR U-7%Mo/Al Dian Anggraini; Noviarty Noviarty; Yanlinastuti Yanlinastuti; Aslina Br. Ginting; Rosika Kriswarini; Arif Nugroho; Boybul Boybul
Urania: Jurnal Ilmiah Daur Bahan Bakar Nuklir Vol. 22 No. 3 (2016): Urania : Jurnal Ilmiah Daur Bahan Bakar Nuklir
Publisher : Badan Riset dan Inovasi Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/urania.2016.22.3.3183

Abstract

The aim of this research is to get a valid method of separating cesium from U-7Mo/Al fuel plate solution through determination of parameter of method (accuracy, precision, and recovery). Precipitation method and cation exchange method that are used refer to standard ASTM 690-000 and research result of U3Si2/Al. Parameter method determination has been done by using 150 μL sample (U-7%Mo/Al fuel plate solution, 50 μL of standard solution in 2 mL of HCl 0,1 N. The sample solution was undergone precipitation process by using HClO4 concentrated and 225 mg of CsNO3 as carrier in temperature 0oC for an hour, while exchange cation process was done by using 400 mg of resin zeolite Lampung. The analysis of 137Cs in CsClO4 and 137Cs - zeolite was done by gamma spectrometer. Determination of recovery method was done by comparing count value of 137Cs before and after separation process. Recovery of precipitation method was obtained 95.56 % with accuracy and precision measurement of 0.375 % and 1.875 % respectively, while recovery of cation exchange method obtained 26.73 %. To sum up, the results show that precipitation method better than exchange cation method for separation 137Cs from U-7Mo/Al fuel plate solution.