Article Per Year (5 Year)
p-Index From 2020 - 2025
0
P-Index
This Author published in this journals
All Journal Bulletin of Chemical Reaction Engineering & Catalysis Bulletin of Chemical Reaction Engineering & Catalysis
Imam Novrizal Aji
Chemical Engineering Department, Faculty of Engineering, Semarang State University, Kampus Unnes Sekaran, Semarang 50229
Chemical Engineering, Chemistry & Bioengineering Chemistry

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
Application of Tin(II) Chloride Catalyst for High FFA Jatropha Oil Esterification in Continuous Reactive Distillation Column Ratna Dewi Kusumaningtyas; Imam Novrizal Aji; Hadiyanto Hadiyanto; Arief Budiman
Bulletin of Chemical Reaction Engineering & Catalysis 2016: BCREC Volume 11 Issue 1 Year 2016 (April 2016)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (519.088 KB) | DOI: 10.9767/bcrec.11.1.417.66-74

Abstract

The application of heterogeneous solid acid catalysts in biodiesel production has become popular and gained significant attention over the last few years. It is since these types of catalysts hold the benefits in terms of easy separation from the product, reusability of the catalyst, high selectivity of the reaction. They are also considered sustainable and powerful particularly in organic synthesis. This work studied the use of tin(II) chloride as solid Lewis acid catalyst to promote the esterification reaction of high Free Fatty Acid (FFA) jatropha oil in continuous reactive distillation column. To obtain the optimum condition, the influences of reaction time, molar ratio of the reactant, and catalyst were investigated. It was revealed that the optimum condition was achieved at the molar ratio of methanol to FFA at 1:60, catalyst concentration of 5%, and reaction temperature of 60°C with the reaction conversion of 90%. This result was significantly superior to the identical reaction performed using batch reactor. The esterification of high FFA jatropha oil using reactive distillation in the presence of tin(II) chloride provided higher conversion than that of Amberlyst-15 heterogeneous catalyst and was comparable to that of homogenous sulfuric acid catalyst, which showed 30 and 94.71% conversion, respectively. The esterification reaction of high FFA jatropha oil was subsequently followed by transesterification reaction for the completion of the biodiesel production. Transesterification was carried out at 60 °C, molar ratio of methanol to oil of 1:6, NaOH catalyst of 1%, and reaction time of one hour. The jatropha biodiesel product resulted from this two steps process could satisfy the ASTM and Indonesian biodiesel standard in terms of ester content (97.79 %), density, and viscosity. 
Application of Tin(II) Chloride Catalyst for High FFA Jatropha Oil Esterification in Continuous Reactive Distillation Column Ratna Dewi Kusumaningtyas; Imam Novrizal Aji; Hadiyanto Hadiyanto; Arief Budiman
Bulletin of Chemical Reaction Engineering & Catalysis 2016: BCREC Volume 11 Issue 1 Year 2016 (April 2016)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.11.1.417.66-74

Abstract

The application of heterogeneous solid acid catalysts in biodiesel production has become popular and gained significant attention over the last few years. It is since these types of catalysts hold the benefits in terms of easy separation from the product, reusability of the catalyst, high selectivity of the reaction. They are also considered sustainable and powerful particularly in organic synthesis. This work studied the use of tin(II) chloride as solid Lewis acid catalyst to promote the esterification reaction of high Free Fatty Acid (FFA) jatropha oil in continuous reactive distillation column. To obtain the optimum condition, the influences of reaction time, molar ratio of the reactant, and catalyst were investigated. It was revealed that the optimum condition was achieved at the molar ratio of methanol to FFA at 1:60, catalyst concentration of 5%, and reaction temperature of 60°C with the reaction conversion of 90%. This result was significantly superior to the identical reaction performed using batch reactor. The esterification of high FFA jatropha oil using reactive distillation in the presence of tin(II) chloride provided higher conversion than that of Amberlyst-15 heterogeneous catalyst and was comparable to that of homogenous sulfuric acid catalyst, which showed 30 and 94.71% conversion, respectively. The esterification reaction of high FFA jatropha oil was subsequently followed by transesterification reaction for the completion of the biodiesel production. Transesterification was carried out at 60 °C, molar ratio of methanol to oil of 1:6, NaOH catalyst of 1%, and reaction time of one hour. The jatropha biodiesel product resulted from this two steps process could satisfy the ASTM and Indonesian biodiesel standard in terms of ester content (97.79 %), density, and viscosity. 
Co-Authors Arief Budiman H Hadiyanto Ratna Dewi Kusumaningtyas