Claim Missing Document
Check
Articles

Found 8 Documents
Search

Evaluasi Ketercapaian Standar Penjaminan Mutu Penelitian Di Program Studi D3 Mesin Otomotif Universitas Muhammadiyah Magelang Dengan Metode Indeks Setiyo, Muji; Waluyo, Budi; Saifudin, .; Purnomo, Bagiyo Condro; Munahar, Suroto; Widodo, Noto; Rusdjijati, Retno
Jurnal Penjaminan Mutu Vol 4, No 1 (2018)
Publisher : LPM IHDN Denpasar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (218.642 KB) | DOI: 10.25078/jpm.v4i1.397

Abstract

In the past decade, the general method for measuring the performance of research and scientific publications in a Study Program at a Higher Education is by the Rough Value (Nilai Kasar, NK) calculated per three years. This value is derived from the accreditation instrument. In fact, the calculation of the performance of research and scientific publications with NK cannot represent an annual performance. Therefore, this paper presents a new method for calculating research and scientific publications performance with an index (IP-PS and IPub-PS), which is calculated annually. An example of quality measurement practice in the Automotive Diploma Program of Universitas Muhammadiyah Magelang. As a result, calculations with IP-PS and IPub-PS are more likely to present real conditions per year than using NK.
PENINGKATAN PEMAHAMAN KURIKULUM 2013 BAGI GURU SEKOLAH DASAR Widodo, Noto; Nugroho, Setiya
BERDIKARI : Jurnal Inovasi dan Penerapan Ipteks Vol 7, No 2 (2019): August
Publisher : UMY

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This community service activity aims at developing skills for elementary school (SD) teachers of Muhammadiyah Sirojuddin in using information technology media, namely Microsoft Excel to process the data of the assessment result to the report in accordance with curriculum 2013. The method used was through information technology training divided into three stages, namely: (1) description making of each grade on the fields of affective, cognitive, and psychomotor; (2) submitting grade of affective, cognitive, and psychomotor fields; (3) converting grade from number to descriptive form. The community service was carried out in six times of meetings with 17 teachers of SD Muhammadiyah Sirojuddin. The result of the service community are 15 teachers are helped in understanding curriculum 2013 and grade conversion process based on Microsoft Excel program. The result of the descriptive grade is the one that will be benefitted by the teachers as data input in the report in accordance with curriculum 2013.
Evaluasi Ketercapaian Standar Penjaminan Mutu Penelitian Di Program Studi D3 Mesin Otomotif Universitas Muhammadiyah Magelang Dengan Metode Indeks Setiyo, Muji; Waluyo, Budi; Saifudin, .; Purnomo, Bagiyo Condro; Munahar, Suroto; Widodo, Noto; Rusdjijati, Retno
Jurnal Penjaminan Mutu Vol 4, No 1 (2018)
Publisher : LPM IHDN Denpasar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25078/jpm.v4i1.397

Abstract

In the past decade, the general method for measuring the performance of research and scientific publications in a Study Program at a Higher Education is by the Rough Value (Nilai Kasar, NK) calculated per three years. This value is derived from the accreditation instrument. In fact, the calculation of the performance of research and scientific publications with NK cannot represent an annual performance. Therefore, this paper presents a new method for calculating research and scientific publications performance with an index (IP-PS and IPub-PS), which is calculated annually. An example of quality measurement practice in the Automotive Diploma Program of Universitas Muhammadiyah Magelang. As a result, calculations with IP-PS and IPub-PS are more likely to present real conditions per year than using NK.
Estimasi Pemborosan Bahan Bakar Akibat Kemacetan Menggunakan Analisis Citra Google Map (Studi Kasus pada Simpang Armada Town Square Mall Magelang) Bagas Arif Prasetyo; Dwi Ahmad Rizani; Muji Setiyo; Noto Widodo; Saifudin Saifudin; Bagiyo Condro Purnomo
Automotive Experiences Vol 1 No 02 (2018)
Publisher : Automotive Laboratory of Universitas Muhammadiyah Magelang in collaboration with Association of Indonesian Vocational Educators (AIVE)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1511.997 KB) | DOI: 10.31603/ae.v1i02.2244

Abstract

Magelang memiliki tingkat kemacetan yang cukup padat pada beberapa ruas jalan terutama yang menuju pusat kota, salah satunya pada simpang Armada Town Square Mall yang kian hari semakin padat. Oleh karena itu, artikel ini menyajikan analisis pemborosan bahan bakar akibat kemacetan dengan menggunakan citra google map. Dalam penelitian ini metode yang digunakan dengan melihat panjang kemacetan pada google map, kemudian menghitung jumlah dan jenis kendaraan yang terjebak dalam kemacetan. Hasil penelitian menunjukkan bahwa kerugian ekonomi akibat kemacetan lalu lintas di simpang Armada Town Square Mall Magelang dari arah Yogyakarta sebesar 147,13 liter per hari untuk gasoline dan 777,82 liter untuk solar. Estimasi kerugian ekonomi akibat kemacetan lalu lintas dalam rupiah sangat bervariatif menurut jenis bahan bakar yang digunakan. Kerugian minimal dalam satu hari adalah Rp. 4.950.000,- ketika menggunakan premium dan solar subsidi, sedangkan kerugian maksimum adalah Rp. 9.940.000,- ketika menggunakan pertamax turbo dan pertamina dex.
Torque and Power Characteristics of Single Piston LPG-Fueled Engines on Variations of Ignition Timing Bagiyo Condro Purnomo; Noto Widodo
Automotive Experiences Vol 2 No 1 (2019)
Publisher : Automotive Laboratory of Universitas Muhammadiyah Magelang in collaboration with Association of Indonesian Vocational Educators (AIVE)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (631.763 KB) | DOI: 10.31603/ae.v2i1.2632

Abstract

Liquefied Petroleum Gas (LPG) is an alternative fuel that has all key properties for the Spark Ignition (SI) engine. However, because of its properties, ignition timing on an LPG SI engine needs to be advanced from the reference angle to get the optimum performance. Therefore, this article presents the torque and power characteristics of a single piston LPG engine on variations of ignition timing. Evaluation of engine performance is carried out at the ignition timing of 15O, 17O, and 19O BTDC. The results showed the highest torque for LPG fuel was 10.64 Nm which was achieved at 3500 rpm with ignition timing of 19O BTDC, while the highest power for LPG fuel was 6.9 hp which was achieved at 5936 rpm with ignition timing of 19O BTDC.
Peningkatan Pemahaman Kurikulum 2013 bagi Guru Sekolah Dasar Noto Widodo; Setiya Nugroho
Berdikari: Jurnal Inovasi dan Penerapan Ipteks Vol 7, No 2 (2019): August
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/bdr.7270

Abstract

This community service activity aims at developing skills for elementary school (SD) teachers of Muhammadiyah Sirojuddin in using information technology media, namely Microsoft Excel to process the data of the assessment result to the report in accordance with curriculum 2013. The method used was through information technology training divided into three stages, namely: (1) description making of each grade on the fields of affective, cognitive, and psychomotor; (2) submitting grade of affective, cognitive, and psychomotor fields; (3) converting grade from number to descriptive form. The community service was carried out in six times of meetings with 17 teachers of SD Muhammadiyah Sirojuddin. The result of the service community are 15 teachers are helped in understanding curriculum 2013 and grade conversion process based on Microsoft Excel program. The result of the descriptive grade is the one that will be benefitted by the teachers as data input in the report in accordance with curriculum 2013.
Design and Implementation of Sterilization Chamber with Ozone and UV-C Light to Break the Transmission of Covid-19 Muhammad Latifur Rochman; Lilik Budiyarto; Muhammad Iqbal Al-Fikri; Khoirul Fa’i; Prasasti Bayu Aji Pramono; Riyan Tri Aditya Pamungkas; Baginda Pangidoan Tanjung; Refaldy Pristiwantoro; Widha Bagus Fahriansyah; Agung Setyo Pambudi; Ahmad Irfan; Riyan Adhy Pratama; Lalank Samudra Mukti Hidayat; Setyo Widiantoro; Darmawan Rois; Muhammad Mauludin Kharim; Wahyu Danu Romadlon; Dwi Restianto; Muji Setiyo; Budi Waluyo; Bagiyo Condro Purnomo; Suroto Munahar; Noto Widodo; Saifudin Saifudin
Urecol Journal. Part D: Applied Sciences Vol. 1 No. 1 (2021): January - June
Publisher : Konsorsium LPPM Perguruan Tinggi Muhammadiyah 'Aisyiyah (PTMA) Koordinator Wilayah Jawa Tengah - DIY

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (464.204 KB) | DOI: 10.53017/ujas.55

Abstract

The emergence of Corona Virus Disease 19 (Covid-19) required a new method to control its spread. During this time, controlling COVID-19 was carried out by implementation of a sterilization chamber using a liquid-based disinfectant. However, the use of liquid-based disinfectants has been evaluated to be less effective because it allows disrupting the respiratory tract. Therefore, this work presents a negative pressure sterilization chamber using Ozone and UV-C lamp. Ozone has been recommended by the Indonesian Institute of Sciences (LIPI) as a substitute for liquid-based disinfectants. In addition, to maximize performance, the chambers are added with UV-C lamps. The negative pressure sterilization chamber with Ozone and ultraviolet lamps was successfully created with the main parts of the cubicle chamber, an Ozone generator, at least one ultraviolet lamp, exhaust fan, switch, and a timer. The negative pressure sterilization chamber with Ozone and ultraviolet lamps according to this work, where the Ozone supply from the Ozone generator is made automatically to the door opening and closing. The duration of the Ozone supply was regulated by a timer. Then, the ultraviolet lamp can be activated together with Ozone or independently. With the implementation of this sterilization chamber, the spread of the Covid-19 virus is expected to be suppressed in a safer way than using liquid-based disinfectants.
Design and Implementation of Sterilization Chamber with Ozone and UV-C Light to Break the Transmission of Covid-19 Muhammad Latifur Rochman; Lilik Budiyarto; Muhammad Iqbal Al-Fikri; Khoirul Fa’i; Prasasti Bayu Aji Pramono; Riyan Tri Aditya Pamungkas; Baginda Pangidoan Tanjung; Refaldy Pristiwantoro; Widha Bagus Fahriansyah; Agung Setyo Pambudi; Ahmad Irfan; Riyan Adhy Pratama; Lalank Samudra Mukti Hidayat; Setyo Widiantoro; Darmawan Rois; Muhammad Mauludin Kharim; Wahyu Danu Romadlon; Dwi Restianto; Muji Setiyo; Budi Waluyo; Bagiyo Condro Purnomo; Suroto Munahar; Noto Widodo; Saifudin Saifudin
Urecol Journal. Part D: Applied Sciences Vol. 1 No. 1 (2021): January - June
Publisher : Konsorsium LPPM Perguruan Tinggi Muhammadiyah 'Aisyiyah (PTMA) Koordinator Wilayah Jawa Tengah - DIY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53017/ujas.55

Abstract

The emergence of Corona Virus Disease 19 (Covid-19) required a new method to control its spread. During this time, controlling COVID-19 was carried out by implementation of a sterilization chamber using a liquid-based disinfectant. However, the use of liquid-based disinfectants has been evaluated to be less effective because it allows disrupting the respiratory tract. Therefore, this work presents a negative pressure sterilization chamber using Ozone and UV-C lamp. Ozone has been recommended by the Indonesian Institute of Sciences (LIPI) as a substitute for liquid-based disinfectants. In addition, to maximize performance, the chambers are added with UV-C lamps. The negative pressure sterilization chamber with Ozone and ultraviolet lamps was successfully created with the main parts of the cubicle chamber, an Ozone generator, at least one ultraviolet lamp, exhaust fan, switch, and a timer. The negative pressure sterilization chamber with Ozone and ultraviolet lamps according to this work, where the Ozone supply from the Ozone generator is made automatically to the door opening and closing. The duration of the Ozone supply was regulated by a timer. Then, the ultraviolet lamp can be activated together with Ozone or independently. With the implementation of this sterilization chamber, the spread of the Covid-19 virus is expected to be suppressed in a safer way than using liquid-based disinfectants.