Garuda - Garba Rujukan Digital

Development of Management Information System Rental Service Photography Web-Based Using PHP Native Case Study at PT Dwipa Photowork Surabaya Ahmad Habib; Rifki Satya; Balok Hariadi
Jurnal Mantik Vol. 6 No. 1 (2022): May: Manajemen, Teknologi Informatika dan Komunikasi (Mantik)
Publisher : Institute of Computer Science (IOCS)

Show Abstract | Download Original | Original Source | Check in Google Scholar

Scheduling is a planning activity to determine when and where each surgery as part of the work in total must be carried out on limited energy sources, and the allocation of energy resources at a certain time by taking into account the available resource capacity. In this research, utilizing the development of information technology, the most important is the application system for data processing or data collection that functions to produce the required information. Every company that wants to develop its business and achieve success, of course, the company must follow the information age by using computer applications that make it easy to process company data. In this study, the author wants to provide a solution by designing an application for processing work service scheduling flow data based on the manual scheduling system that already exists at the Dwipa Photowork Company which is still less effective and efficient, and creates a database system used in a well-computerized scheduling application. between the database system, the user interface, and the user itself

Modelling and Analysis of Ziegler-Nichols and Chien-Hrones-Reswick Tuning PID on DC Motor Speed Control Reza Sarwo Widagdo; Balok Hariadi; Kukuh Setyadjit
Jurnal Teknologi Elektro Vol 14, No 1 (2023)
Publisher : Electrical Engineering, Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/jte.2023.v14i1.005

There have been many studies on the methods used to control DC motors, one of which is the proportional-integral-derivative (PID) control method. The tuning procedure is carried out by trial and error whose results are not necessarily correct, to overcome this problem an alternative is needed that can achieve a better and faster value for the tuning process. Our contribution is explained the conventional PID (Ziegler - Nichols) and modificated PID (Chien - Hrones - Reswick). We also analyze the response of the speed-controlled DC motor using the Proportional, Integral, and Derivative parameters obtained from the tuning method described above. We also discuss the advantages and disadvantages of each formula of these methods. Implementing both methods using a Matlab, creating a more convenient and user-friendly environment for engineering students and practicing engineers to better understand the formulas of his PID controller tuning method.

Rancang Bangun Alat Penghitung Berat dan Volume Paket Berbasis Arduino Reza Wahyu Maulid Himawan; Balok Hariadi
COMSERVA : Jurnal Penelitian dan Pengabdian Masyarakat Vol. 3 No. 06 (2023): COMSERVA : Jurnal Penelitian dan Pengabdian Masyarakat
Publisher : Publikasi Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59141/comserva.v3i06.1008

Pengukuran suatu jarak dapat dilakukan tanpa menyentuh bidang yang di ukur, seperti penggunaan ultrasonik untuk mengukur jarak dengan sistem kerja pemancaran gelombang suara dan menerima kembali gelombang suara. Penelitian ini bertujuan untuk merancang dan mengembangkan alat penghitung berat dan volume paket berbasis Arduino Mega 2560. Alat ini dirancang untuk memberikan solusi otomatis yang akurat dan efisien dalam mengukur berat dan volume paket. Sensor ultrasonik memiliki dua komponen utama. transmitter sebagai pemancar gelombang suara dan receiver sebagai pencegat gelombang. Perbedaan waktu yang tercipta saat gelombang suara dikirim dan diterima dibaca oleh sensor dan diproses oleh mikrokontroler sebagai pengukur jarak. Sensor loadcell digunakan sebagai pengukur massa paket. Sensor ini didasarkan pada ketegangan dan tekanan dari pengukur regangan. Saat beban diterapkan, badan sel beban mengalami deformasi elastis, menghasilkan kompresi dan tekanan pada pengukur regangan yang terpasang. Karena proses kompresi dan tekanan, sensor regangan menghasilkan perubahan hambatan atau hambatan listrik. Modul amplifier HX711 mendukung sensor ini sebagai penguat sinyal karena keluaran dari sensor ini sangat kecil. Metode penelitian pembuatan alat penghitung berat dan volume paket berbasis arduino meliputi pembuatan diagram blok fungsional, pembuatan diagram kerja fungsional. Data yang diperoleh dari sensor ultrasonik dan sensor load cell diolah oleh mikrokontroler Arduino. LCD16x2 menampilkan hasil pembacaan. Selain itu, printer thermal mencetak hasil pengukuran saat tombol cetak ditekan. Perangkat ini dapat mengukur berat maksimal 100 kg dan volume 1 meter persegi.

Study of ACSR Conductor Characteristics on Power Losses and Voltage Drop in 500 kV Transmission Lines: A Case Study at Krian-Ungaran Puji Slamet; Reza Sarwo Widagdo; Balok Hariadi
Wahana : Tridarma Perguruan Tinggi Vol 77 No 1 (2025): Wahana Tridarma Perguruan Tinggi
Publisher : LPPM Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/wahana.v77i1.10315

The transmission system is the stage of electricity distribution from the generator to the substation to the distribution system. During the process of distributing electric power, there is a voltage regulation that occurs whether it is still within safe limits or not because if it exceeds safe limits it can cause damage to electrical equipment. Power losses can occur due to several factors, namely insulator leaks, distance, and others. One of the issues identified is the use of ACSR (Aluminum Conductor Steel Reinforced) conductors, which, although commonly used due to their mechanical strength and relatively low cost, also contribute to significant power losses due to their resistance and susceptibility to environmental effects such as temperature rise. The transmission network in this study uses ACSR type conductor wire with a Dove type and a cross-sectional area of 327,77 mm² over a distance of 251 km, with a resistance value of 0.1024 Ω/km. The manual calculation method was employed by recording current and voltage values that change every day for one month. The conclusion obtained from manual calculations of power losses and voltage regulation is that the percentage of voltage regulation on transmission lines for one month remains within the safe limit, where the maximum allowed is 10 percent. However, despite the voltage being regulated within limits, significant power losses were recorded, with the highest loss being 16,79 MW and the lowest 6,01 MW. The total power losses on the transmission network for one month reached 272,92 MW, with an average of 9,09 MW per day. These findings highlight the drawback of using ACSR conductors in long-distance transmission lines, emphasizing the need for consideration of alternative conductor types or loss-reduction strategies to improve overall transmission efficiency.

Rancang Bangun Sistem Kontrol Starter Berbasis IoT (Internet of Things) Kurnia Paranita Kartika Riyanti; Balok Hariadi
Nucleus Journal Vol. 1 No. 2 (2022): November
Publisher : Universitas Darul Ulum

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32492/nucleus.v1i2.47

Today's automotive industry is experiencing rapid development triggering many new innovations involving Internet of Things (IoT) technology. By utilizing IoT (Internet Of Things) in the vehicle starter system, it will certainly save time, especially when heating the vehicle before use. We can do an internet-based starter for 5 minutes before using our vehicle so it is very beneficial for people who have high mobility. The automatic starter system can run according to its function by utilizing the wifi network which is controlled using the Blynk application with a simple electrical circuit using the appropriate microcontroller. This system works by pressing a button on social media, but our response will be forwarded in the form of an order that will be received and then instructs the actuator to start the vehicle. Over time, the system can get better and simpler for the future, such as turning on the vehicle's air conditioner automatically or for using other systems.

Sistem Deteksi Kebocoran Pipa Air menggunakan Sensor Flow dan IoT dengan Algoritma ANFIS Lutfi Agung Swarga; Luhfita Tirta Swarga; Balok Hariadi
Jurnal FORTECH Vol. 7 No. 1 (2026): In Progress
Publisher : FORTEI (Forum Pendidikan Tinggi Teknik Elektro Indonesia)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56795/fortech.v7i1.7101

Air merupakan sumber daya alam yang sering digunakan dalam kehidupan sehari-hari dimana dalam hal ini seringkali mengalami penggunaan air secara berlebih. Kebocoran pada pipa menjadi salah satu faktor kenapa penggunaan air sangat boros yang mengakibatkan kerugian ekonomi pada kalangan masyarakat. Oleh karena itu, dirancanglah sebuah alat untuk mendeteksi kebocoran pipa berbasis IoT agar dapat dilakukan monitoring dengan jarak jauh. Arduino digunakan sebagai mikrokontroller untuk mengirim sinya pada selenoid agar melakukan penutupan otomatis. Jenis arduino yang digunakan yaitu Arduino Mega Wifi 8266, Sensor flow digunakan mengetahui adanya kebocoran pada pipa dan selenoid digunakan sebagai penutup saluran pipa yang mengalami kebocoran dan menambahkan metode Adaptive Neuro-FuzzyInference System (ANFIS) untuk pengelolaan data kebocoran.

Sistem Deteksi Kebocoran Pipa Air menggunakan Sensor Flow dan IoT dengan Algoritma ANFIS Lutfi Agung Swarga; Luhfita Tirta Swarga; Balok Hariadi
Jurnal FORTECH Vol. 7 No. 1 (2026): In Progress
Publisher : FORTEI (Forum Pendidikan Tinggi Teknik Elektro Indonesia)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56795/fortech.v7i1.7101

Air merupakan sumber daya alam yang sering digunakan dalam kehidupan sehari-hari dimana dalam hal ini seringkali mengalami penggunaan air secara berlebih. Kebocoran pada pipa menjadi salah satu faktor kenapa penggunaan air sangat boros yang mengakibatkan kerugian ekonomi pada kalangan masyarakat. Oleh karena itu, dirancanglah sebuah alat untuk mendeteksi kebocoran pipa berbasis IoT agar dapat dilakukan monitoring dengan jarak jauh. Arduino digunakan sebagai mikrokontroller untuk mengirim sinya pada selenoid agar melakukan penutupan otomatis. Jenis arduino yang digunakan yaitu Arduino Mega Wifi 8266, Sensor flow digunakan mengetahui adanya kebocoran pada pipa dan selenoid digunakan sebagai penutup saluran pipa yang mengalami kebocoran dan menambahkan metode Adaptive Neuro-FuzzyInference System (ANFIS) untuk pengelolaan data kebocoran.

Title

Found 7 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 7 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 7 Documents
Search