Muhammad Cholid Djunaidi
Chemistry Departement Of Science And Mathematic Faculty Diponegoro University Jl. Prof. Soedarto, SH., Jurusan Kimia Fakultas Sains Dan Matematika Universitas Diponegoro, Tembalang Semarang

Published : 37 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : reaktor

SINTESIS TURUNAN POLIEUGENOL SEBAGAI CARRIER BAGI RECOVERY LOGAM BERAT DENGAN TEKNIK MEMBRAN CAIR M. Cholid Djunaidi; Retno A. Lusiana; Pratama J. Wibawa; Dwi Siswanta; Jumina Jumina
Reaktor Volume 13, Nomor 1, Juni 2010
Publisher : Dept. of Chemical Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (373.388 KB) | DOI: 10.14710/reaktor.13.1.16-23

Abstract

Telah dilakukan sintesis senyawa asam poliuegenoksi asetat dan polieugenoksi asetil piridil karbinolat (suatu turunan polieugenoksi asetat dengan gugus aktif N) dari eugenol. Hasil sintesis digunakan sebagai ekstraktan logam berat dengan metode transport membran cair. Analisis struktur polimer yang terbentuk dilakukan dengan spektrometer infra merah, 1H NMR, KLT, dan uji kelarutan. Penentuan berat molekul relatif polimer menggunakan metode viscometer Ubbelohde. Transport logam dilakukan dengan Membran Cair Ruah (BLM) menggunakan sel gelas tipe U terhadap campuran logam Cu (II), Fe (III), Ni (II), Cd (II), Zn (II), dan Cr (III) kesemuanya dalam bentuk garam klorida. Transport dilakukan pada fasa umpan dan penerima HCl, konsentrasi logam masing-masing 50 ppm. Penentuan konsentrasi ion logam di fasa penerima sebelum dan sesudah transport dilakukan dengan spectrofotometer serapan atom, sedangkan perubahan pH yang menyertai diukur dengan pH meter. Hasil sintesis polieugenoksi asetat dan polieugenoksi asetil piridil karbinolat berupa serbuk amorf berwarna merah bata sampai coklat tua, dengan berat molekul 5.980.854 gram/mol dan 5.602.282 gram/mol. Hasil transport terhadap campuran logam menunjukkan polieugenoksi asetat dan polieugenoksi asetil piridil karbinolat dengan gugus N hasil sintesis mampu mentransferkan  campuran logam ke fasa penerima dengan urutan logam hard  (Cr (III) dan Fe (III)) > logam borderline (Ni (II), Zn (II) dan Cu (II)), logam soft Cd (II).
RECOVERY PERAK DARI LIMBAH FOTOGRAFI MELALUI MEMBRAN CAIR BERPENDUKUNG DENGAN SENYAWA PEMBAWA ASAM DI-2-ETIL HEKSILFOSFAT (D2EHPA) M.C. Djunaidi; D.S. Widodo; S. Anwar
Reaktor Volume 11, Nomor 2, Desember 2007
Publisher : Dept. of Chemical Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (231.199 KB) | DOI: 10.14710/reaktor.11.2.98-103

Abstract

Telah dilakukan penelitian tentang recovery perak dari limbah cuci cetak dengan metode membran cair berpendukung (SLM). Sebagai membran pendukung digunakan PTFE yang direndam selama 2 jam dalam senyawa pembawa D2EHPA 1 M dengan pelarut kerosen dan dilakukan pengadukan selama 6 jam. Untuk mengetahui kondisi optimum dalam recovery perak dilakukan variasi pH larutan umpan 1; 1,5; 2; 2,5; 3; 3,5; 4, larutan penerima HCl; HCl-EDTA; HNO3; HNO3-EDTA; H3PO4; H3PO4-EDTA serta konsentrasi larutan limbah pemekatan ½ kali; pengenceran 0 kali; pengenceran 10 kali. Dari penelitian ini diperoleh % transpor perak dari limbah fotografi dengan variasi pH larutan umpan memberikan % transpor perak optimum pada pH 2,5 yaitu 96,44% dengan larutan penerima HCl, sedangkan untuk % transpor perak pada fasa penerima dengan variasi larutan penerima memberikan hasil optimum pada larutan penerima (HCl-EDTA) yaitu 63,85% dan untuk variasi konsentrasi larutan umpan memberikan hasil optimum pada pengenceran 10 kali. Dapat disimpulkan bahwa kondisi optimum untuk proses recovery perak dari limbah fotografi yaitu pH larutan umpan 2,5 dengan larutan penerima HCl. Sedangkan pada variasi larutan penerima diperoleh hasil optimum pada larutan penerima EDTA-HCl dan pada variasi konsentrasi limbah fotografi, konsentrasi paling encer memberikan hasil optimum dalam proses recovery perak dari limbah fotografi.
Recovery of Cu (II) and Cr (VI) Metals from Electroplating Liquid Waste Using Polymer Inclusion Membrane (PIM) muhammad cholid djunaidi; Nor Basid Adiwibawa Prasetya; Nur Asih Setyowati; Khabibi Khabibi; Khoirun Nita Ulfia
Reaktor Volume 18 No. 2 June 2018
Publisher : Dept. of Chemical Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (643.189 KB) | DOI: 10.14710/reaktor.18.2.102-109

Abstract

Research on recovery of Cu (II) and Cr (VI) from electroplating liquid waste has been carried out using a Polymer Inclusion Membrane (PIM). PIM has a high stability to overcome the weakness of liquid membrane instability. The PIM membrane was placed between two phases namely the feed phase as a metal source of Cu (II) from electroplating waste with pH 3 and the receiving phase which is HNO3 solution with pH 1 and pH 4.4 in the feed phase and pH 6.3 in the receiving phase with NaCl 2 N for metal Cr (VI). Recovery efficiency is known by determining the concentration of Cu (II) and Cr (VI) in the feed and receiving phases using AAS, while the membrane characterization were carried out using FTIR, SEM and UV-vis spectroscopy. The resulting PIM membrane has properties of thin, clear and flexible. AAS data showed that the percentage of PIM transport with stirring for 24 hours performed the highest percentage of Cu (II) metal transport from feed phase of 83.41% and transport in the receiving phase of 72.56%. While the percentage of optimum Cr (VI) transport was 97.8% in the feed phase and 76.5% in the receiving phase. The results of membrane characterization using FTIR and UV spectroscopy showed that the PIM membrane was quite stable. While the results of SEM show that there were no pores in the membrane so that the transport occurs by diffusion through the intermediate of the carrier compound. Keywords: electroplating waste; liquid membrane; PIM