Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

p-Index From 2021 - 2026

2.449

P-Index

This Author published in this journals

All Journal Jurnal Teknik Sipil Paulus Civil Engineering Journal

Jonie Tanijaya

Universitas Kristen Indonesia Paulus

Author-ID : 5375021

Civil Engineering, Building, Construction & Architecture Transportation

Published : 20 Documents Claim Missing Document

Claim Missing Document

Articles

Title

1 2

Pengaruh Penggunaan Bottom Ash Sebagai Pengganti Semen Dengan Perendaman NaCl Terhadap Sifat Mekanik Beton Stefanny; Jonie Tanijaya; Suryanti Rapang Tonapa
Paulus Civil Engineering Journal Vol 2 No 4 (2020): Volume.2 No.4, Desember 2020
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Based on Government Regulation (PP) No. 101 of 2014 bottom ash is categorized as hazardous and toxic waste (B3). Therefore, the author utilizes bottom ash waste as an alternative substitution of concrete mixture material to reduce environmental pollution. Most of the earth's surface is marine territory, the most dominant salt element contained in seawater is NaCl which is known to be aggressive towards concrete. This study was conducted to find out the influence of bottom ash percentage on concrete mixture. From the results of the study obtained a strong value press 28 days in a row of 26,031 MPa, 25,182 MPa, and 23,201 MPa. Based on this research, it can be known that the mixture of concrete with bottom ash substitution causes concrete to decrease strength as the percentage of bottom ash substitution increases.

Pengaruh Fly Ash Dan Bottom Ash Sebagai Bahan Substitusi Pada Beton Marlyana Antika Pagau; Jonie Tanijaya; Desi Sandy
Paulus Civil Engineering Journal Vol 2 No 4 (2020): Volume.2 No.4, Desember 2020
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Generally, factory waste cannot be disposed of directly because it can pollute the environment. In the city of Makassar, South Sulawesi, to be precise at PT. Makassar Tene uses coal as factory fuel, where the rest of the coal combustion produces fly ash and bottom ash waste which requires processing before disposal. This study aims to determine the value of compressive strength, split tensile strength and flexural strength of concrete and to determine the effect of the percentage of fly ash and bottom ash substitution in the concrete mixture. This research was conducted using the American Concrete Institute (ACI) method with a design quality of 23 MPa. Based on this research, it can be seen that the concrete mixture with fly ash and bottom ash substitution causes the concrete to experience a decrease in strength as the percentage of bottom ash substitution increases.

Karakteristik Beton Normal Substitusi Agregat Halus Bottom Ash Pada Perendaman Asam Sulfat Iksal Lagalung; Jonie Tanijaya; Suryanti Rapang Tonapa
Paulus Civil Engineering Journal Vol 3 No 1 (2021): Volume 3, No.1, Maret 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

This study conducted a feasibility test for bottom ash as a concrete construction material. In this study, the percentage of fine aggregate bottom ash substitution of 0%, 25%, 35% can be used for concrete mixtures with pH-4 sulfuric acid soaking. With the test object used measuring 15 cm x 30 cm and 60 cm x 15 cm x 15 cm as many as 45 samples, using the American Concrete Institute (ACI) method. The test is a compressive strength test. tensile strength and flexural strength of concrete with a design quality of 30 MPa. At the age of 28 days, the compressive strength values were 32.727 Mpa, 33.859 Mpa, 36.782 Mpa. Concrete with substitution of bottom ash as fine aggregate with variations of 0%, 25% and 35% has increased strength as the percentage of bottom ash substitution increases where the higher the percentage of bottom ash substitution, the higher the strength of the concrete, so it can be said that the percentage of bottom ash substitution is directly proportional with concrete strength.

Pengaruh Kalsium Karbonat (CaCO3) Sebagai Bahan Substitusi Semen pada Beton Mutu Tinggi Nobertus Rombe Seru; Jonie Tanijaya; Lisa Febriani
Paulus Civil Engineering Journal Vol 3 No 1 (2021): Volume 3, No.1, Maret 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

The main constituent of cement is calcium carbonate. In concrete mixing, a materiaI that can be used as a substitute for partial cement is calcium carbonate. The purpose of this study is to determine the compressive strength, spIit tensiIe strength, and flexural strength of concrete using calcium carbonate as a substitute for partial cement in high quality concrete. The research methodology started from examining the characteristics of the aggregate, calcium carbonate, and mix design (SNI 03-2834-200), manufacturing of cylinder and beam specimens. The results show that the composition of the concrete mixture using calcium carbonate as a cement substitution indicates that the higher the percentage of variation in calcium carbonate will reduce the quality value of the concrete.

Analisis Kekuatan Kolom Beton Bertulang Berdasarkan Diagram Interaksi Kolom Indra Dody Kurniawan Manguki'; Jonie Tanijaya; Olan Jujun Sanggaria
Paulus Civil Engineering Journal Vol 3 No 2 (2021): Paulus Civil Engineering Journal Volume 3, Nomor 2, Juni, 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

The column interaction diagram is a boundary area graph showing the various combinations of axial loads and moments that the column can safely hold. The benefit of a column interaction diagram provides an overview of the strength of the column in question. This study aims to analyze rectangular and circular columns using column interaction diagrams and then compare the strength of the columns in withstanding a combination of axial loads and bending moments with the same area. In this study, square and circular columns have the same number of reinforcement, diameter of reinforcement, steel strength, concrete quality, and cross-sectional area. The column is reviewed based on five conditions, namely pure axial load conditions, pure bending moment, and three failure conditions. Based on the five conditions that occurred, a column interaction diagram was created by using Microsoft Excel. Results of the analysis show that in the same area, the square column is stronger in withstanding the bending moment (Mu) of the circular column by 0.015 - 0.61%, while the circular column is stronger in resisting the axial force (Pu) of the square column by 1,9 - 4.4%.

Pengaruh Serbuk Cangkang Keong Sawah Sebagai Pengganti Sebagian Semen Pada Beton Normal Reiner Putra Pakanan; Jonie Tanijaya; Olan Jujun Sanggaria
Paulus Civil Engineering Journal Vol 3 No 3 (2021): PCEJ, Vol.3, No.3, 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Along with the increasing pace of development, many methods and research have been carried out and developed aimed at increasing the strength of concrete, one of which is by utilizing waste rice snail shells as a partial replacement of cement. This snail is considered a pest for farmers. Snail carcasses can also damage the environment and cause a bad smell. This can be used and utilized as an alternative material in concrete mixtures. The percentage of use of rice snail shell substitution varied, namely 0%, 10%, and 15%. The tests carried out were the compressive strength test, split tensile strength test, flexural strength test, and the modulus of elasticity of concrete with a concrete quality of 25 MPa. The test objects used were cylinders measuring 15 cm and 30 cm high and beams measuring 60 cm × 15 cm × 15 cm with variations in age of 7 days, 21 days, and 28 days. The highest value was obtained at 10% snail shell variation with 27,540 MPa, 2,735 MPa, 4,131 MPa, respectively. so that the 10% snail shell variation used in this study is still safe to use as a cement substitution material in normal concrete mixtures.

Perbandingan Beton Dengan Menggunakan Portland Composite Cement Dan Ordinary Portland Cement Vinansius Ponco; Jonie Tanijaya; Olan Jujun Sanggaria
Paulus Civil Engineering Journal Vol 3 No 3 (2021): PCEJ, Vol.3, No.3, 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Cement is the basic material for making concrete that can be used as a hydraulic binder. There are various types of cement including OPC and PCC cement. The problem now is that there is no technical data that can be used as a reference in determining the proportion of the mixture. Examples of cement are obtained from the same factory. namely PT. Semen Tonasa, South Sulawesi with an amount of 78.96 kg of cement for each type of cement. From the results of laboratory tests, it was found that the data on the comparison of concrete using OPC and PCC cements had different data on the of OPC cement is 3.726 Mpa and PCC cement is 3.223 Mpa and for testing the modulus of elasticity of OPC cement is 19371.316 Mpa and PCC cement is 17579.182 Mpa. The test results have met the standard for structural concrete with the same water-cement factor.

Perilaku Lentur Balok Beton Menggunakan Geotextile pada Daerah Tarik Sri Ponny; Jonie Tanijaya; Suryanti Rapang Tonapa
Paulus Civil Engineering Journal Vol 3 No 3 (2021): PCEJ, Vol.3, No.3, 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Geotextile is made of permeable geosynthetic. Geotextile s are formed from synthetic fibers based on polymers that have high mechanical properties in tensile strength, trapezoidal tearing strength, and puncture resistance. Therefore, researchers want to increase the use of Geotextile as an added material in the tensile area of concrete blocks. The test objects used are 9 pieces of 150mm×150mm×600mm beams. The results of the research were that the addition of woven Geotextile s and non-woven Geotextile s on concrete blocks increased, for woven Geotextile s by 21.593% of beams without using Geotextile s and non-woven Geotextile s of 17.058% of beams without using Geotextile s. So the use of Geotextile s on concrete blocks can improve quality because the value of the flexural strength of beams using Geotextile s is greater than beams without using Geotextiles.

Penggunaan Geotextile Sebagai Perkuatan Pada Silinder Beton Mutu Normal Febrialdo Pratama Salinding; Jonie Tanijaya; Benny Kusuma
Paulus Civil Engineering Journal Vol 3 No 4 (2021): Volume 3 No.4 Desember 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Because of the transformation of the load of an arrangement on the building infrastructure can receive the load outside the original plan, for that it is necessary to strengthen the structure so that the structure of the building remains safe. In this study the use of woven &non-woven fibers in new concrete is expected to increase strong press, strong tensile and modulus elasticity to conventional concrete. The mix design of the study uses the American Concrete Institute (ACI) method. The test sample of 36 was then divided into 3 variations. The results of this study have shown the addition of strong press, strong pull, and modulus elasticity. Strong press for woven increased 29.485% % and non-woven increased 7.296%, strong pull for woven increased 24.633% and non-woven increased 5.285%., modulus elasticity for woven increased 20,924% and non-woven increased 9.356%. For the comparison of both materials, woven is stronger than non-woven.

Analisis Pengaruh Penempatan Balok Anak pada Perencanaan Pelat Lantai Gedung Toko Satu Sama Karel Agung; Jonie Tanijaya; Olan Jujun Sanggaria
Paulus Civil Engineering Journal Vol 3 No 4 (2021): Volume 3 No.4 Desember 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

One model of structural planning that can be used to make the building structure efficient is to add the secondary beams. Based on these assumptions, this paper is made to analyze the effect of placing secondary beams on the floor structure of the building to determine the efficiency that occurs to the thickness of the slab and the reinforced concrete material used. In the case of planning the Toko Satu Sama building on Jl. Perintis Kemerdekaan City Makassar floor plan is given one secondary beam on the x-direction and produces a plate thickness of 150 mm. The floor plan is re-planned by making a floor plan without secondary beams, a floor plan with y-directional secondary beams and a floor plan with x-and-y secondary beams. The bending moment that occurs on the floor plate is calculated using the 1971 PBI method, but still considering the latest provisions in SNI 2847, 2019. The results of the calculation showed that the floor plan with the pattern of placement of secondary beams in the direction of x and y (h = 120 mm) can streamline the plate by 20% of the thickness of the plate with the pattern of placement of the secondary beam in the direction of x. In line with that, concrete needs can be effective by 15,359 % (12,284 m3). Even if it has more reinforcement needs, the pattern of placement of secondary beams in the direction of x and y is the most efficient pattern.English translation.

Co-Authors Andika Pasulu Ariel Risa Parrung Benny Kusuma Benny Kusuma Benny Kusuma Desi Sandy Desi Sandy Dominggus Paerunan Febrialdo Pratama Salinding Febriani, Lisa Filbert Sanfra Restu George Andre Papendang Iksal Lagalung Indra Dody Kurniawan Manguki' Irene Datuan Karel Agung Luciana Buarlele Marlyana Antika Pagau Nobertus Rombe Seru Olan Jujun Sanggaria Progustin Mangngi Putu Axel Benyamin Radjawane, Louise Elizabeth Reiner Putra Pakanan Sri Ponny Stefanny Triyana Vivin Wagio Vinansius Ponco

Title Search

Found 19 Documents Search Journal : Paulus Civil Engineering Journal

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 19 Documents
Search
Journal : Paulus Civil Engineering Journal