Claim Missing Document
Check
Articles

Found 2 Documents
Search

Mengklasifikasikan Tanah Lempung Menggunakan USCS Agata Iwan Candra; Yuzi Melia Adi Putri; Onie Wardani; Zaizafun Zakiya; Annas Dwi Safi'i
CIVED Vol 9, No 3 (2022): September 2022
Publisher : Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/cived.v9i3.117204

Abstract

Tanah lempung merupakan salah satu jenis tanah yang terdiri dari butiran yang sangat kecil dan berwarna coklat. Untuk mengetahui identitas tanah lempung sangat diperlukan pengujian agar dapat mengklasifikasikannya. Metode yang digunakan adalah metode USCS. Sampel tanah yang diambil berada di Desa Pojok, Kota Kediri. Pengujian tersebut berdasarkan uji Gradasi Ayakan, Liquid Limit, dan Plastis Limit. Dalam pengujian gradasi ayakan ditemukan koefisien keseragaman(Cu) sebesar 3 dan koefisien gradasi(Cc) sebesar 0,96. Pengujian batas cair menghasilkan kadar air 36,556% merupakan kriteria sedang. Batas plastis menghasilkan kadar air 24,15% merupakan kriteria sedang. Sedangkan pengujian indeks plastisitas menghasilkan 12,41%. Berdasarkan pengujian ini,  sampel tanah tergolong kelompok SP(POORLY GRADED SAND) yaitu kelompok gravel yang bergradasi baik dengan penggolongan Cu ˂6 dan 1 ˃Cc ˃3. Karakteristik agregat tanah lempung yang ada di Desa Pojok memiliki sifat fisik berwarna coklat, teksturnya halus dan lengket, menunjukkan sifat-sifat plastis dan juga memiliki sifat kohesi. Agregat tanah lempung yang ada di Desa Pojok ini pun sudah memenuhi spesifikasi untuk penyerapan air agregat kasar, penyerapan air agregat halus, keausan agregat kasar, dan agregat alamnya juga sudah memenuhi spesifikasi. Selain itu, manfaat dari pengujian untuk mengklasifikasikan jenis tanah ini dapat digunakan sebagai dasar untuk pengujian tanah selanjutnya.
Mengidentifikasi Jenis Tanah, Batas Plastis, Batas Cair Tanah Lempung Sheila Ananda Putri Pertiwi; Agata Iwan Candra; Tiara Sherlyta Sari; Annas Dwi Safi'i; Zaizafun Zakiya
Jurnal Talenta Sipil Vol 6, No 1 (2023): Februari
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/talentasipil.v6i1.120

Abstract

Soil is a material consisting of mineral grains bonded to one another. Soil itself has various types. One of them is clay. Clay soil is microscopic soil particles that come from weathering rocks. The water content in clay tends to be high so it has a low bearing capacity. In addition, it also has a high shrinkage. Therefore, the management of clay soils must be handled properly. The method used is Gradation Sieve, Liquid Limit, and Plastic Limit. These three methods are considered suitable for conducting tests on clay samples. From these tests, obtained D10 values of 0.14, D30 of 0.5 and D60 of 1.6. And the results of the calculation of Cu and Cc obtained the values of Cu 4 and 1 Cc 3 so that the soil is classified into the GC group (well granded gravel with clay). For the results of the liquid limit test (LL) on the soil samples that have been studied, the average liquid limit value of 25 strokes is 41.12%. For the results of the plastic limit (PL) test on the soil sample, the plastic limit value of 32.42% was obtained. And the results of reducing the liquid limit with the plastic limit obtained a plastic index value of 8.70% so that the soil is included in the criteria for low plasticity index.