Claim Missing Document
Check
Articles

Found 7 Documents
Search

REALISASI UNTUK SISTEM DESKRIPTOR LINIER INVARIANT WAKTU Novrianti .
Jurnal Matematika UNAND Vol 2, No 3 (2013)
Publisher : Jurusan Matematika FMIPA Universitas Andalas Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jmu.2.3.1-8.2013

Abstract

A continuous invariant time linear control system is a model which is oftenapplied in economics, engineering, and numerical analysis. In this paper, the realizationof the transfer function for the descriptor system with multi inputs and multi outputs(MIMO) is discussed. Some algebraic techniques are used to prove some theorems andto get a realization of a transfer function.
The Utilization of Aluminum Sulfate Doses with Jar Test at Local Water Treatment Company in Jambi CitJ Corry Handayani; Novi Indrawaty; Novrianti Novrianti
Indonesian Journal of Chemical Engineering Vol. 1 No. 1 (2023): Indonesian Journal of Chemical Engineering
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26555/ijce.v1i1.459

Abstract

Surface water before being used for certain purposes should be treated by special treatment. This process such kinds of procedure reducing the turbidity, color, and bacteria effect on the water. A kind of attention to the source water is cultivating the water by installing water treatment for the sake of the water that is produced is proper to be consumed and distributed to the society. The local company that does this kind of treatment in Jambi city is the local drinking water company, Tirta Mayang. By using the coagulant, aluminum sulfate, at the treatment processing, this company cultivates the source water from the Batanghari river. Three factors determine the success of the coagulant that is used, listed various chemicals, doses of chemicals, and the mixture of chemicals that are used. By using the jar test, this research yielded that the utilization of aluminum sulfate in the dry season is more than in the rainy season.
DESIGNING FOR ERGONOMIC GAWANGAN BY USING A ROLLER Novrianti; Chandra Dewi, Diana; Handayani, Corry; Bayhaqi, Imam
Jurnal Kreatif : Desain Produk Industri dan Arsitektur Vol. 12 No. 1 (2024): Vol.12, No. 1, April 2024
Publisher : Indonesian Society of Applied Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46964/jkdpia.v12i1.560

Abstract

Batik craftsmen needed a tool to help them while writing on the carving fabric (covering the motif on the fabric) with wax. They use gawangan for buffering the writing fabric for the sake of the easiest way for the writing process and the fabric is not folded. This is because if the fabric is pleated, the wax on the fabric will harden, break off, and come off the fabric. For this long time, the craftsmen still used the wooden gawangan, and only wrote a unit of batik once a time in the production process. The main problem is how to make the fabric after the wax process saving safely. Gawangan that using roller is a kind of innovation that has never been made before, in Jambi, moreover in Indonesia or maybe in the world. The dimension of the design will use anthropometric data so that the gawangan is ergonomic. The main purpose of this design is to ensure that the fabric that has been long waxed is safe, without any anxiety about the motif on the fabric breaking due to broken wax. Further, this gawangan is designed to accommodate rolls of fabric up to 100 meters.
Analisis Klaster Kinerja Dosen STITEKNAS Jambi menggunakan Metode Clustering Berdasarkan Kepuasan Pelanggan Pendidikan Rizka, Afifah; Novrianti, Novrianti
INFOMATEK Vol 28 No 1 (2026): Juni 2026 (In Progress)
Publisher : Fakultas Teknik, Universitas Pasundan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23969/infomatek.v28i1.39030

Abstract

Institusi pendidikan dengan mahasiswa sebagai pelanggan sangat membutuhkan dosen yang berkompeten di dalam pendistribusian ilmu pengetahuan. Hal ini ditujukan agar standar nasional pendidikan tinggi dan standar institusi terpenuhi, dan juga kinerja dosen mendapatkan nilai yang tinggi di dalam evaluasinya. Salah satu penilaian kinerja dosen adalah dilakukan oleh mahasiswa yang bersifat transparan dan tanpa tekanan. Penilaian yang dilakukan dalam lima dimensi yakni tangible, reliability, responsiveness, assurance, dan empathy, adalah mencakup seluruh kebutuhan konsumen pendidikan di dalam proses pembelajarannya. Berdasarkan data penilaian dosen STITEKNAS Jambi pada semester genap TA 2024 / 2025 oleh mahasiswa diperoleh bahwasanya kinerja dosen digolongkan menjadi 3 kelompok, yakni cukup, unggul, dan baik, dengan dominan dosennya memiliki kinerja pada cluster baik. Dibutuhkan peningkatan terhadap dosen yang masih berada pada cluster cukup, dipertahankan bahkan ditingkatkan bagi dosen yang berada pada cluster lainnya.
Analisis Numerik Aliran Banjir 1D dengan Shallow Water Equations untuk Identifikasi Batas Kapasitas Sungai Gunung Nago Noverina Alfiany; Monika Rianti Helmi; Novrianti
Mandalika Mathematics and Educations Journal Vol 8 No 3 (2026): Edisi September
Publisher : FKIP Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/jm.v8i3.13279

Abstract

Flooding is a common environmental problem in river basins due to increased rainfall and runoff from surrounding areas. One of the main causes of flooding is lateral flow entering the riverbed, increasing its discharge and depth. In this study, we analyzed the influence of lateral flow on changes in water depth and determined the river's capacity before flooding occurred in the Mount Nago River basin. Numerical analysis of one-dimensional flow using Shallow Water Equations (SWE) was performed using the Lax–Friedrichs explicit finite difference method. Numerical simulations were performed by varying the lateral flow discharge in certain segments of the river basin and applying flood hydrograph boundary conditions upstream. The simulation results showed that increasing lateral flow caused a significant increase in water depth. The river was still able to accommodate lateral flow up to a certain value, but when the lateral flow exceeded the cross-sectional capacity, the water level exceeded the riverbank height and caused flooding. The results of this study indicate that the SWE model is quite effective in predicting flood potential and can be used as an initial basis for flood mitigation planning and river environmental management.
An Analisis Eksperimental Laju Perpindahan Panas Radiator Toyota Avanza 1300 cc Menggunakan Air Dan Coolant X Pada Variasi Putaran Mesin Vivi Apriyanti; Affandi Miedika; Novrianti Novrianti
INFOMATEK Vol 28 No 2 (2026): Desember 2026
Publisher : Fakultas Teknik, Universitas Pasundan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23969/infomatek.v28i2.68324

Abstract

Sistem pendingin kendaraan harus mampu memindahkan panas dari mesin ke lingkungan secara stabil pada berbagai kondisi operasi. Penelitian ini menganalisis laju perpindahan panas radiator Toyota Avanza 1300 cc menggunakan media air dan coolant jenis X yang dianalisa pada putaran mesin 1000, 2000, dan 3000 rpm, dengan tujuan untuk mengetahui perbandingan pengaruh pendingin yang diberikan antara coolant X dan air. Eksperimen dilakukan dengan dua jenis fluida, tiga tingkat putaran, dan tiga kali ulangan pada setiap kombinasi perlakuan. Temperatur masuk dan keluar radiator diukur dengan menggunakan alat ukur termokopel digital, sedangkan laju aliran massa ditentukan secara volumetrik dan dikonversi menjadi laju aliran massa. Laju perpindahan panas yang terjadi dihitung menggunakan persamaan neraca energi satu sisi fluida. Rata – rata Q ̇air berturut – turut adalah 2590,15; 4391,14; dan 7059,06 W, sedangkan coolant X menghasilkan 4302,71; 7808,33; dan 12612,87 W. Peningkatan relatif Q ̇ coolant X terhadap air adalah sebesar 66,21%; 77,92%; dan 78,70%. ANOVA dua arah menunjukkan bahwa jenis fluida, putaran mesin, dan interaksinya berhubungan signifikan dengan Q ̇ pada taraf 5%. Hasil ini menunjukkan bahwa pada kondisi penelitian, coolant X menghasilkan pelepasan panas yang tinggi daripada air.
DESIGNING FOR ERGONOMIC GAWANGAN BY USING A ROLLER Novrianti; Diana Chandra Dewi; Corry Handayani; Imam Bayhaqi
Jurnal Kreatif : Desain Produk Industri dan Arsitektur Vol. 12 No. 1 (2024): Vol.12, No. 1, April 2024
Publisher : Indonesian Society of Applied Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46964/jkdpia.v12i1.560

Abstract

Batik craftsmen needed a tool to help them while writing on the carving fabric (covering the motif on the fabric) with wax. They use gawangan for buffering the writing fabric for the sake of the easiest way for the writing process and the fabric is not folded. This is because if the fabric is pleated, the wax on the fabric will harden, break off, and come off the fabric. For this long time, the craftsmen still used the wooden gawangan, and only wrote a unit of batik once a time in the production process. The main problem is how to make the fabric after the wax process saving safely. Gawangan that using roller is a kind of innovation that has never been made before, in Jambi, moreover in Indonesia or maybe in the world. The dimension of the design will use anthropometric data so that the gawangan is ergonomic. The main purpose of this design is to ensure that the fabric that has been long waxed is safe, without any anxiety about the motif on the fabric breaking due to broken wax. Further, this gawangan is designed to accommodate rolls of fabric up to 100 meters.