Tahasin Ahmed Fahim
Noakhali Science and Technology University

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Design, simulation, and analysis of microstrip patch antenna for wireless applications operating at 3.6 GHz Md. Sohel Rana; Tahasin Ahmed Fahim; Shuvashis Biswas Rana; Russel Mahbub; Md. Mostafizur Rahman
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 21, No 5: October 2023
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v21i5.24813

Abstract

In this study, a microstrip patch antenna that works at 3.6 GHz was built and tested to see how well it works. In this work, Rogers RT/Duroid 5880 has been used as the substrate material, with a dielectric permittivity of 2.2 and a thickness of 0.3451 mm; it serves as the base for the examined antenna. The computer simulation technology (CST) studio suite is utilized to show the recommended antenna design. The goal of this study was to get a more extensive transmission capacity, a lower voltage standing wave ratio (VSWR), and a lower return loss, but the main goal was to get a higher gain, directivity, and efficiency. After simulation, the return loss, gain, directivity, bandwidth, and efficiency of the supplied antenna are found to be -17.626 dB, 9.671 dBi, 9.924 dBi, 0.2 GHz, and 97.45%, respectively. Besides, the recreation uncovered that the transfer speed side-lobe level at phi was much better than those of the earlier works, at -28.8 dB, respectively. Thus, it makes a solid contender for remote innovation and more robust communication.
At 28 GHz microstrip patch antenna for wireless applications: a review Md. Sohel Rana; Piyal Mistry; Md. Jahidur Rahaman; Sahriar Islam Shipon; Shake Zion Haider Ovi; Md. Masud Rana; Tahasin Ahmed Fahim
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 22, No 2: April 2024
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v22i2.25114

Abstract

Microstrip patch antennas are becoming increasingly popular because they are small, have low profiles, are easy to integrate, are very cheap, and work well. For this reason, this antenna could be used for wireless communication systems. This research paper reviews and studies 28 GHz microstrip patch antenna for wireless applications. Different substrate materials have been used to make these antennas, such as FR-4 (loss), FR-4 Epoxy, Rogers RT/droid 5880, TLC-30, Rogers RT/droid 5880 LZ, and others. Different substrate materials and shapes were used to make microstrip patch antennas with a frequency of 28 GHz. This article discusses the different sizes of antennas, the other geometric shapes antennas can take, the different ways antennas’ properties can be analyzed, and the different types of antennas. It will also talk about the material, thickness, loss tangent, return loss, bandwidth, voltage standing wave ratio (VSWR), gain, efficiency, and directivity of the substrate. This antenna is used for super-high-frequency (SHF), radars, commercial wireless local area networks (LANs), cell phones, and other wireless communications systems.