Garuda - Garba Rujukan Digital

Optimizing Solar Energy Production in Partially Shaded PV Systems with PSO-INC Hybrid Control Abboud, Sarah; Loulijat, Azeddine; Boulal, Abdellah; Semma, El Alami; Habachi, Rachid; Chojaa, Hamid; Ma'arif, Alfian; Suwarno, Iswanto; Mossa, Mahmoud A.
Journal of Robotics and Control (JRC) Vol 5, No 2 (2024)
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/jrc.v5i2.20896

Partial shading, from obstacles such as buildings or trees, is a major challenge for photovoltaic systems, causing unpredictable fluctuations in solar energy production and underlining the need for advanced energy management strategies. In this paper, we propose an innovative approach that combines hybrid metaheuristic optimization with maximum power point tracking control (MPPT), using particle swarm optimization (PSO) in conjunction with the incremental conductance (IC) algorithm. We compare the proposed method with the conventional Perturb and Observation (PO) algorithm. The choice of PO as a comparison method is due to its simplicity, its familiarity with the scientific literature, its low cost of implementation. The main objective of swarm optimization combined with the IC algorithm lies in its ability to overcome the challenges posed by partial shading, ensuring accurate and efficient tracking of the point of maximum power, thanks to dynamic adaptation to variations in solar irradiation, thus enhancing the performance and resilience of the photovoltaic system. This approach is of crucial importance, offering considerable potential for solving the complex challenges associated with partial shading. Our results show that this hybrid MPPT algorithm offers superior tracking efficiency 98% , faster convergence 500ms , better stability and increased robustness compared to traditional MPPT approaches. The system is composed of a PV and a boost converter that connects the input to the resistive load. The algorithms were implemented with MATLAB/Simulink as the simulation tool. These results not only reinforce the viability of sustainable energy solutions, but also open the way for the development of more sustainable energy solutions.The perspectives of this work are oriented towards a practical and extended integration of the proposed hybrid approach in real photovoltaic systems, with a particular emphasis on experimental validation.

Enhancing the Performance of a Wind Turbine Based DFIG Generation System Using an Effective ANFIS Control Technique Ouhssain, Said; Chojaa, Hamid; Aljarhizi, Yahya; Al Ibrahmi, Elmehdi; Maarif, Alfian; A. Mossa, Mahmoud
International Journal of Robotics and Control Systems Vol 4, No 4 (2024)
Publisher : Association for Scientific Computing Electronics and Engineering (ASCEE)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31763/ijrcs.v4i4.1451

This paper gives a look on producing energy using wind turbines and imposing robust Maximum Power Point Tracking (MPPT) technique to operate around an optimal rotational speed. A mechanical speed control based on PI controller is presented in order to extract the maximum power and optimizing the conversion efficiency of wind's kinetic energy into electric energy. A doubly-fed induction generator (DFIG) is utilized because it is preferable for applications in wind energy systems referring to the capability to regulate the output voltage and improve the stability of the grid. Its operational characteristics and the regulating procedures such as Indirect Vector Control (IVC) and other sophisticated strategies for instance the ANFIS controller enhance operating flexibility and optimum performance under diverse conditions. This has attributed the split to the improved ANFIS in that it includes the artificial neural networks besides the fuzzy logic since they improve on learning as well as parameter fine tuning. Some of them are working with a comparatively fewer number of data sets; and therefore, it can be useful in classification, modeling and control. This configuration enables to regulate the generator's magnetic flux, torque, and reactive power, adjusting to changes inside wind velocity and disruptions within the grid. The performance of the proposed MPPT-IIVC method is examined by way of simulations in Matlab/Simulink. The simulations concerned a dynamic model incorporating the wind turbine, the DFIG, and the electric grid. The results show that the proposed technique can incredibly enhance the wind energy, maintain precise regulation over speed, and effectively adjust and regulate grid voltage and frequency. The performance of the proposed ANFIS controller is compared with a PI controller and discovered that ANFIS enhances the robustness, precision, dynamic response, total harmonic distortion THD (%) of the injected current into the grid, the reference tracking ability and Overshoot (%).

Performance Optimization of a DFIG-based Variable Speed Wind Turbines by IVC-ANFIS Controller Ouhssain, Said; Chojaa, Hamid; Aljarhizi, Yahya; Al Ibrahmi, Elmehdi; Hadoune, Aziz; Maarif, Alfian; Suwarno, Iswanto; Mossa, Mahmoud A.
Journal of Robotics and Control (JRC) Vol 5, No 5 (2024)
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/jrc.v5i5.22118

An improved indirect vector control (IVC) method for a wind energy conversion system (WECS) is presented in this research. Field-oriented control or indirect vector control as it is sometimes called is a very important element of contemporary WECS that employs DFIGs. This control strategy is pivotal for achieving high performance and efficiency of DFIG-based wind turbines because it offers direct control on the torque and power ratings of the generator. A doubly fed induction generator (DFIG) is used by the WECS to inject power to the grid. An adaptive network-based fuzzy inference system (ANFIS), which is proposed to replace traditional methods like linear PI controllers, is the basis for this IVC. In this paper we chose ANFIS controller over traditional linear Proportional-Integral (PI) controllers due to its ability to adapt and learn from the system, leading to improved performance. The rotor voltage is controlled by the proposed IVC in order to regulate the exchanged active and reactive power between the stator and the grid. In order to verify the proposed control in terms of performance and robustness, a comparative analysis between the proposed ANFIS and linear PI controllers for the WECS-DFIG system is performed by a simulation study in a MATLAB/Simulink environment. This analysis covers both the transient and steady states of operation. As a result, the proposed ANFIS controller shows improved efficiency and robustness compared to the linear PI controllers. This superiority stems from its ability to integrate the flexibility and effectiveness inherent in diverse artificial intelligence controllers, specifically the synergistic use of Neural Network (NN) and Fuzzy Logic (FL) algorithms. The ANFIS controller's adaptability to diverse operating conditions and its capability to learn and optimize its performance play pivotal roles in enhancing its control capabilities within the WECS-DFIG system.

Performance Optimization of a DFIG-based Variable Speed Wind Turbines by IVC-ANFIS Controller Ouhssain, Said; Chojaa, Hamid; Aljarhizi, Yahya; Al Ibrahmi, Elmehdi; Hadoune, Aziz; Maarif, Alfian; Suwarno, Iswanto; Mossa, Mahmoud A.
Journal of Robotics and Control (JRC) Vol. 5 No. 5 (2024)
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/jrc.v5i5.22118

An improved indirect vector control (IVC) method for a wind energy conversion system (WECS) is presented in this research. Field-oriented control or indirect vector control as it is sometimes called is a very important element of contemporary WECS that employs DFIGs. This control strategy is pivotal for achieving high performance and efficiency of DFIG-based wind turbines because it offers direct control on the torque and power ratings of the generator. A doubly fed induction generator (DFIG) is used by the WECS to inject power to the grid. An adaptive network-based fuzzy inference system (ANFIS), which is proposed to replace traditional methods like linear PI controllers, is the basis for this IVC. In this paper we chose ANFIS controller over traditional linear Proportional-Integral (PI) controllers due to its ability to adapt and learn from the system, leading to improved performance. The rotor voltage is controlled by the proposed IVC in order to regulate the exchanged active and reactive power between the stator and the grid. In order to verify the proposed control in terms of performance and robustness, a comparative analysis between the proposed ANFIS and linear PI controllers for the WECS-DFIG system is performed by a simulation study in a MATLAB/Simulink environment. This analysis covers both the transient and steady states of operation. As a result, the proposed ANFIS controller shows improved efficiency and robustness compared to the linear PI controllers. This superiority stems from its ability to integrate the flexibility and effectiveness inherent in diverse artificial intelligence controllers, specifically the synergistic use of Neural Network (NN) and Fuzzy Logic (FL) algorithms. The ANFIS controller's adaptability to diverse operating conditions and its capability to learn and optimize its performance play pivotal roles in enhancing its control capabilities within the WECS-DFIG system.

Title

Found 4 Documents
Search

Abstract

Abstract

Abstract

Abstract

Title Search

Found 4 Documents Search

Abstract

Abstract

Abstract

Abstract

Title

Found 4 Documents
Search