Claim Missing Document
Check
Articles

Found 2 Documents
Search

Crack Propagation Observation Using Digital Image Correlation (DIC) on Oil Palm Shell (OPS) Reinforced Concrete Beam Handika, Nuraziz; Astutiningsih, Sotya; Sentosa, Bastian Okto Bangkit; Gasti, Muhammad Daffa
Jurnal Teknik Sipil dan Lingkungan Vol. 9 No. 1: April 2024
Publisher : Departemen Teknik Sipil dan Lingkungan, IPB University and The Institut of ENgineering Indonesia (PII), Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29244/jsil.9.1.1-10

Abstract

In terms of disaster risk management, crack opening and behaviour of structural elements should be predicted to prevent severe risk after the failure. To do so, structure responses, and crack propagation phenomena of concrete structural elements should be understood. Opening, re-closing, or re-opening of cracks in concrete may occur under some circumstances. Capturing the behaviour along the test, sometimes, becomes a problem. Measurement tools should be detached to prevent damage as the sample reaches failure point. A set of contactless devices, called Digital Image Correlation (DIC), has been developed in the Laboratory of Structural and Material Universitas Indonesia. In this research, experimental on Oil Palm Shell (OPS) concrete beam with 19 MPa of fc’, was conducted under four-point loading in the laboratory. OPS is a solid by-product obtained from palm oil production. This experiment uses a 300 x 15 x 250 cm3 beam under a semi-cyclic loading protocol. Load vs deflection, strain, and cracking behaviour are obtained by using the DIC system as its equipment. The conventional measurement (dial gauge) results were compared to the DIC results. The measurement from both tools has similar values. Also, this DIC system can capture deflection and measure crack opening evolution along the test.
Crack Propagation Observation Using Digital Image Correlation (DIC) on Oil Palm Shell (OPS) Reinforced Concrete Beam Handika, Nuraziz; Astutiningsih, Sotya; Sentosa, Bastian Okto Bangkit; Gasti, Muhammad Daffa
Jurnal Teknik Sipil dan Lingkungan Vol. 9 No. 1: April 2024
Publisher : Departemen Teknik Sipil dan Lingkungan IPB

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29244/jsil.9.1.1-10

Abstract

In terms of disaster risk management, crack opening and behaviour of structural elements should be predicted to prevent severe risk after the failure. To do so, structure responses, and crack propagation phenomena of concrete structural elements should be understood. Opening, re-closing, or re-opening of cracks in concrete may occur under some circumstances. Capturing the behaviour along the test, sometimes, becomes a problem. Measurement tools should be detached to prevent damage as the sample reaches failure point. A set of contactless devices, called Digital Image Correlation (DIC), has been developed in the Laboratory of Structural and Material Universitas Indonesia. In this research, experimental on Oil Palm Shell (OPS) concrete beam with 19 MPa of fc’, was conducted under four-point loading in the laboratory. OPS is a solid by-product obtained from palm oil production. This experiment uses a 300 x 15 x 250 cm3 beam under a semi-cyclic loading protocol. Load vs deflection, strain, and cracking behaviour are obtained by using the DIC system as its equipment. The conventional measurement (dial gauge) results were compared to the DIC results. The measurement from both tools has similar values. Also, this DIC system can capture deflection and measure crack opening evolution along the test.