Claim Missing Document
Check
Articles

Found 6 Documents
Search

ANALISA FOSTUR KERJA DAN BEBAN KERJA OPERATOR PEMBUAT ARANG DI C.V. FATIH BROTHER Pangaribuan, Omry; Tambun, Bungaran; Sinaga, Joslen
JURNAL DARMA AGUNG Vol 32 No 1 (2024): FEBUARI
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Darma Agung (LPPM_UDA)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46930/ojsuda.v32i1.4138

Abstract

Penelitian ini berjudul "Analisis Fostur Kerja dan Beban Kerja Operator terhadap Keluhan Muskuloskeletal." Dilakukan di CV. Fatih Brother, yang terletak di Lorong Perjuangan, Desa Sukaraya, Kecamatan Pancur Batu, Kabupaten Deli Serdang. Perusahaan ini fokus pada produksi arang dengan bahan baku dari kayu rambutan. Proses produksi melibatkan beberapa tahap, termasuk penerimaan bahan baku, pemotongan, pemetaan, pembakaran, pendinginan, pembongkaran, dan pengangkutan arang ke minibus. Salah satu stasiun kerja di mana operator sering mengalami sakit punggung adalah stasiun pengangkutan arang ke minibus. Di sini, operator secara manual memindahkan arang seberat 25 kg setiap hari ke minibus tanpa memperhatikan postur kerja yang ergonomis. Tujuan penelitian ini adalah menilai dan mengevaluasi postur kerja operator di stasiun pengangkutan arang ke minibus, serta memperbaiki postur kerja yang tidak ergonomis untuk mencapai postur kerja yang lebih baik. Variabel dalam penelitian ini adalah postur kerja, yang mencakup posisi atau bagian tubuh selama melakukan aktivitas kerja yang berkaitan dengan desain area kerja dan persyaratan tugas. Metode pengumpulan data melibatkan observasi langsung di lapangan, wawancara, dan studi literatur. Metode pengolahan dan analisis data melibatkan Nordic Body Map Questionnaire dan REBA. Hasil analisis menunjukkan bahwa pada proses pengangkutan arang 25 kg ke minibus, bagian tubuh sebelah kiri pada elemen gerakan pertama memiliki tingkat risiko tinggi, sementara bagian tubuh sebelah kanan memiliki risiko sedang. Perbaikan pada postur kerja dan sistem kerja diperlukan. Untuk elemen gerakan kedua, keempat, dan kelima, kedua bagian tubuh ditemukan memiliki risiko sedang dan memerlukan tindakan perbaikan postur kerja. Skor tertinggi REBA (8) terjadi pada elemen gerakan pertama, sedangkan skor terendah (4) terdapat pada elemen gerakan keempat. Tindakan perbaikan postur kerja melibatkan penyediaan fasilitas seperti kereta sorong dan meja kerja di area arang. Rekomendasi melibatkan manajemen perusahaan untuk mempertimbangkan analisis postur kerja dan menambahkan alat bantu yang dapat meningkatkan produktivitas kerja dan kesejahteraan operator.
PENENTUAN JUMLAH FREKUENSI PEMERIKSAAN DAN PERBAIKAN YANG OPTIMAL UNTUK MEMINIMUMKAN DOWNTIME MESIN CETAK OBAT MEREK MKS-TBL 55 DI PT. INFAR ARISPHARMA MEDAN Pangaribuan, Omry; Tambun, Bungaran; Mariaty, Linda; Sinaga, Joslen
JURNAL DARMA AGUNG Vol 32 No 3 (2024): JUNI
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Darma Agung (LPPM_UDA)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46930/ojsuda.v32i3.4471

Abstract

Setiap perusahaan harus secara rutin merawat peralatan produksinya agar tetap dalam kondisi optimal. Jika peralatan produksi mengalami kerusakan, produksi akan terhenti, jadwal menjadi terganggu, dan biaya perbaikan akan meningkat karena kerusakan semakin parah. PT. Infar Arispharma adalah salah satu perusahaan yang bergerak dalam industri pembuatan obat.baik dalam bentuk cair ataupun dalam bentuk padat. Khusus untuk obat padat ini, salah satu alat atau mesin untuk membuatnya adalah mesin cetak obat merek MKS-TBL55. Yang menjadi permasalahan dalam kegiatan operasinya adalah, sering terjadi penundaan proses produksi yang diakibatkan rusaknya mesin cetak obat tersebut . Hal ini terjadi oleh karena kurangnya perhatian manajemen dan operator dalam memeriksa keadaan mesin sehingga mesin menjadi cepat aus dan tidak terawat Adapun tujuan dari penelitian ini adalah untuk menentukan jumlah frekuensi pemeriksaan dan perbaikan mesin cetak obat MKS-TBL55 yang optimal per periodenya serta menentukan downtime minimum sehubungan dengan dengan waktu pemeriksaan dan perbaikan mesin cetak obat tersebut. Metode pengumpulan data yang dilakukan adalah studi dokumentasi dan wawancara, sedangkan metode pengolahan data adalah menggunakan prinsip-prinsip manajemen perawatan yang berkaitan dengan preventif maintenance atau pemeliharaan terencana. Setelah data dikumpulkan kemudian diolah, dan hasilnya adalah sebagai berikut: (a).pola data waktu pemeriksaan dan perbaikan mein cetak obat berdistribusi eksponensial negative, (b) jumlah frekuensi pemeriksaan yang optimal pada mesin cetak obat adalah 15 kali dalam dua tahun, (c).jumlah perbaikan yang optimal adalah 39 kali dalam dua tahun, (c). down time minimum waktu pemeriksaan dan waktu perbaikan masing-masing adalah 27 jam per bulan untuk pemeriksaan dan 71 jam per bulan untuk waktu perbaikan. Besarnya tingkat availability dari mesin cetak obat merek MKS-TBL55 sehubungan dengan jumlah pemeriksaan dan perbaikan yang optimal tersebut adalah 86,6%.
Kombinasi Persamaan Rosin-Rammler dan Metode Pengapungan Batang (Buoyancy Weighing-Bar Method) pada Penentuan Distribusi Ukuran Gelembung Air dalam Kerosin Tambun, Rondang; Sijabat, Gabriella J J; Sidebang, Theresia J; Tambun, Bungaran
Jurnal Teknik Kimia USU Vol. 12 No. 1 (2023): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32734/jtk.v12i1.11269

Abstract

Droplet size distribution is one of the important physical parameters in the industry that use emulsions. In this research, a new method namely the Buoyancy Weighing-Bar Method is used to determine the droplet size distribution. In this research, droplet size distribution of kerosene in water is predicted which cannot be determined by the Buoyancy Weighing-Bar Method is carried out by using a combination of the Rosin-Rammler equation and measurement data by the Buoyancy Weighing-Bar Method. From the research results it was found that the combination of the Rosin-Rammler equation and the Buoyancy Weighing-Bar Method can be performed to predict the droplet size distribution of kerosene in water, and the results are comparable to the results obtained with the Coulter counter method. In the use of various types of bars, variations in bars shape and variations in bar length, the combination of the Rosin-Rammler equation and the Buoyancy Weighing-Bar Method can measure the droplet size distribution of kerosene in water. 
Kombinasi Persamaan Rosin-Rammler dan Metode Pengapungan Batang (Buoyancy Weighing-Bar Method) pada Penentuan Distribusi Ukuran Gelembung Air dalam Kerosin Tambun, Rondang; Sijabat, Gabriella J J; Sidebang, Theresia J; Tambun, Bungaran
Jurnal Teknik Kimia USU Vol. 12 No. 1 (2023): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32734/jtk.v12i1.11269

Abstract

Droplet size distribution is one of the important physical parameters in the industry that use emulsions. In this research, a new method namely the Buoyancy Weighing-Bar Method is used to determine the droplet size distribution. In this research, droplet size distribution of kerosene in water is predicted which cannot be determined by the Buoyancy Weighing-Bar Method is carried out by using a combination of the Rosin-Rammler equation and measurement data by the Buoyancy Weighing-Bar Method. From the research results it was found that the combination of the Rosin-Rammler equation and the Buoyancy Weighing-Bar Method can be performed to predict the droplet size distribution of kerosene in water, and the results are comparable to the results obtained with the Coulter counter method. In the use of various types of bars, variations in bars shape and variations in bar length, the combination of the Rosin-Rammler equation and the Buoyancy Weighing-Bar Method can measure the droplet size distribution of kerosene in water. 
ANALISA KETERDAPATAN AKUIFER AIR BAWAH TANAH DENGAN METODE GEOLISTRIK KONFIGURASI SCHLUMBERGER DESA TUNTUNGAN II DUSUN I Panjaitan, Natalius; Tambun, Bungaran; halawa, analiser
Jurnal Sains dan Teknologi ISTP Vol. 20 No. 02 (2024): JANUARI
Publisher : LPPM ISTP

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59637/jsti.v20i02.327

Abstract

Clean water is still a problem in the city of Medan and Deli Serdang Regency according to the North Sumatra Provincial government in the Medan area and its surroundings, the total need for clean water is 11,000 liters/second and an additional water supply of 4,000 liters/second is needed with water availability of 200 liters/second. So that the water supply in the Medan city area and its surroundings still lacks a water supply of 3,800 liters/second article sumutprov.go.id (https://sumutprov.go.id/artikel/artikel/resmikan-programmaster-meter-di-medan--gubernur--edy-rahmayadi-targetkan-tuntaskan--kebutuhan-air-bersih-di-akhir-periode) Besides that, in Tuntungan II Village, Hamlet I, Pancur Batu District, Deli Serdang Regency, there is no water channel from government institutions (PDAM) so that the community's water source in this area is obtained from water from wells/dug wells. this makes this research carried out. to interpret the presence of groundwater which can be used as a source of clean water in the research area conducted in Desa Tuntungan II , Dusun I, Kecamatan Medan Tuntungan, Kota Medan, North Sumatra Province. From the results of data processing, then interpretation of the data is carried out. Data interpretation is done by comparing the RMS table with the rules of the resistivity table of Suyono (1978), Astier (1971) and the geological map of the study area to determine the type of rock. The stratigraphy of the research location according to the resistivity value is thought to consist of 5 lithologies, namely Overburden (24.9-32.4Ω), andesite (1428-1473 Ω), clay (6.45-14.2Ω), andesite breccia (148-170 Ω), tuff (37.6 -74.6 Ω). The existence of a water-carrying layer (aquifer) at the point of measurement Point I is at a depth of around 14.8 – 76.1 meters. The predicted layer thickness is 61.2 m. The lithology of this layer is tuff as a water-carrying layer (aquifer). The existence of a water-carrying layer (aquifer) at Point II is at a depth of around 11.1 – 91.3 meters. The thickness of the layer is 80.2 meters. The lithology of this layer is a strong tuff as a water-carrying layer (aquifer).
ANALISIS K3 BERDASARKAN JSA PADA PENGELASAN TANGKI MINYAK PERTAMINA DI SP OGAN FIELD EP ASSET 2 Putra, Toni Satria; Halawa, Analiser; Tambun, Bungaran
Jurnal Sains dan Teknologi ISTP Vol. 20 No. 01 (2023): Desember
Publisher : LPPM ISTP

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59637/jsti.v20i01.362

Abstract

The purpose of this study is to know the application of occupational safety health (K3), to know the Job Safety Analysis (JSA) as an effort to prevent accidents due to welding work at the bottom of the oil collection tank. application of the Risk Control Hierarchy According to Iso 45001 in the process of welding the bottom of the oil collection tank. In this study, the survey method was used. Then analyzed descriptively aims to describe the nature of a situation. The results of the research on welding the bottom of the pertamina oil collection tank at SP OGAN FIELD EP ASSET 2 have been implemented as written in the Standard Operating Procedure (SOP). The application of Job Safety Analysis (JSA) in the tank bottom welding process has been applied by workers by wearing Personal Protective Equipment (PPE). Welding work on the bottom of the oil collection tank has been carried out based on the Risk Control Hierarchy according to Iso 45001, namely, providing training to workers, conducting regular equipment inspections, wearing personal protective equipment and minimizing and even eliminating hazards that can occur when welding work is done.