Claim Missing Document
Check
Articles

Found 7 Documents
Search

Performance evaluation of novel 9-level RSMLI topology for grid-tied solar-PV system Sharma, Pidatala Prabhakara; Rao, Lingineni Shanmukha; Amulya, Goddanti
International Journal of Applied Power Engineering (IJAPE) Vol 13, No 2: June 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v13.i2.pp269-281

Abstract

The shortage of traditional fossil fuels like coal, petrol and natural-gas are increased day-by-day, fulfills the most of energy demand. Most of engineers are trying to maximize the energy demand by employing renewable energy with existing micro-grid system. Owing to merits, the solar-PV system plays a significant alternative among all other renewable energy sources due to abundant and virtuous nature. For grid-tied solar-PV system, the cascaded H-bridge multilevel inverter is the most significant over the classical 2-level inverter due to provision of isolated input DC sources. But the cascaded H-bridge topology is designed for limited voltage levels due to its larger number of switches for higher voltage levels, high cost, large-size, and more weight. To alleviate these demerits, a reduced-switch multilevel inverter has been generally preferable for higher voltage levels. In this work, a novel 9-level reduced-switch multilevel inverter (RSMLI) topology has been proposed by utilizing low number of switching devices. The performance of proposed novel 9-level RSMLI topology has been verified in grid-tied solar-PV system by using MATLAB/Simulink tool, simulation results are presented with attractive comparisons.
A novel SIMIDCBC topology driven PMSM for PEV application Kumar, Chinta Anil; Jothinathan, Kandasamy; Rao, Lingineni Shanmukha
International Journal of Applied Power Engineering (IJAPE) Vol 13, No 1: March 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v13.i1.pp66-80

Abstract

Nowadays, the usage of renewable energy based electric vehicles is increased for reducing CO2 emissions, usage of fossil fuels, energy saving, and transportation cost. As a result, it becomes the most significantly run with combined energy sources and it is good choice which minimizes the energy consumption from charging stations. The available renewable energy is integrated to power-train through power-electronic interface; such interface consists of three-phase inverter with DC-DC boost converter. The combined energy sources like solar-PV/battery are integrated to power-train by employing multi-input non-isolated step-up DC-DC converter for providing continuous power to drive the vehicle. The multi-terminal topologies have efficient, reliable performance, continuous input current, high step-up gain over the conventional DC-DC converters. In this work, a unique framework of combined energy powered switched-inductor based multi-input DC boost converter topology has been proposed to drive the PMSM. The performance of proposed SIMIDCBC topology driven PMSM for PEV application under constant and variable speed conditions are verified by using MATLAB/Simulink tool, simulation results are presented.
Performance evaluation of solar-PV integrated hybrid fuzzy-logic controlled multi-functional UPQC for enhancing PQ features Rao, Lingineni Shanmukha; Mogilicharla, Veera Narasimha Murthy; Sharma, Pidatala Prabhakara; Rajkumar, Prathipati
International Journal of Applied Power Engineering (IJAPE) Vol 13, No 2: June 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v13.i2.pp396-407

Abstract

To improve distribution system voltage and current quality, a newly built solar-PV system connected multi-functional universal power quality compensator (MFUPQC) has been extensively used. The proposed MFUPQC mitigates both load and source-side concerns in a three-phase distribution system. Furthermore, as part of the distributed generation scheme, active power from solar PV is injected into the grid or source when solar PV is available. In this context, the proposed MFUPQC was tested in both PQ enhancement and DG integration modes using a feasible control scheme. The proportional-integral controller is used for shunt- voltage-source inverter (VSI) DC-link control, which is not suitable for regulating DC-link voltage at the desired level due to incorrect gain value selection. In this work, an intelligent hybrid-fuzzy-logic DC-link control of MFUPQC evidences the intelligent knowledge base for better regulation of power-quality issues. The suggested hybrid fuzzy-logic controlled MFUPQC device's performance for both power quality (PQ) improvement and DG integration is validated using the MATLAB/Simulink software tool, and simulation results are provided with an appealing comparison analysis.
A novel hybrid-fuzzy logic based UVC technique for solar-PV/grid integrated water-pumping system Sharma, Pidatala Prabhakara; Rao, Lingineni Shanmukha; Kumar, Moparthi Ranjith; Vidurasri, Malineni
International Journal of Applied Power Engineering (IJAPE) Vol 13, No 2: June 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v13.i2.pp415-427

Abstract

The continual depletion of fossil fuels and increased green-house emissions are persuading the consumers to install micro-renewable energy sources-based water pumping system. Among numerous energy sources, the solar-PV plays a significant role in water pumping application due to its virtuous, environment friendly, noise-free and abundant nature, so on. Along with solar-PV, the grid integrated system enables the continuous operation of water pumping system during varying temperature and irradiance conditions, and also delivers available solar-PV energy to grid during non-functional of pumping system. The above operations are carried by using bidirectional inverter which is controlled by using unit-vector control (UVC) technique. It consists of proportional-integral controller, which is not suited for regulation of DC-link voltage at desired level because of improper selection of gain values. In this work, an intelligent hybrid-fuzzy logic based UVC technique evidences the intelligent knowledge base for better regulation of DC-link voltage and power-flow of bidirectional inverter. The performance and operation of proposed hybrid-fuzzy logic control UVC technique for solar-PV/Grid integrated water-pumping system is evaluated under various operating cases by using MATLAB/Simulink tool; simulated results are conferred with superlative comparisons.
Mitigation of PQ issues in EV charging station connected distribution system using novel RSMLI-based shunt APF Mogilicharla, Veera Narasimha Murthy; Rao, Lingineni Shanmukha; Moparthi, Ranjit Kumar; Chowdary, Tarigopula Jyothika
International Journal of Advances in Applied Sciences Vol 12, No 4: December 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijaas.v12.i4.pp413-424

Abstract

In the present scenario, the significant use of electric vehicles (EVs) is growing rapidly in the automotive industry due to cheaper transportation, no fossil fuel required, low maintenance, no fuel cost, and low impacts on the environment over the formal internal combustion engine (ICE) vehicles. In actuality, these EVs are powered by batteries that are charged by a utility-grid-based charging facility. A power-electronic conversion-based charging device is used in this charging station to charge the battery packs in the EV system. The problem statement of this work is identified, these conversion devices in charging units proliferate the power quality of the utility grid. To overcome these problems, a classical square-wave inverter-based active power filter (APF) is employed. The major problems in classical inverters are high common-mode voltage, more harmonic profile, high dV/dt stress, high switching stress, and low efficiency. The contribution of this work is proposing the multilevel inverter (MLI) based APF for better compensation over classical inverters. In this approach, a novel reduced-switch MLI-based APF has been proposed for the mitigation of harmonic currents and also enhances the power factor in utility-grid-connected distribution systems. The effectiveness of the proposed reduced-switch multilevel inverter (RSMLI)-APF is validated by integrating the number of charging units with the MATLAB/Simulink tool, and simulation outcomes are shown along with comparisons.
A novel fuzzy-logic controller-MDsUPQC topology for power quality improvement in multi-feeder distribution system Mudhavath, Sriramulu Naik; Rao, Lingineni Shanmukha; Sharma, Pidatala Prabhakara; Latha, Sangu Bala Pushpa
International Journal of Advances in Applied Sciences Vol 13, No 1: March 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijaas.v13.i1.pp33-45

Abstract

In the current situation, the significant usage of massive non-linear functioned power electronic loads has been increased in domestic and industrial applications. The main problem of power-quality (PQ) deterioration in both voltage quality and current quality from nominal values and also damaging the single/multi feeder distribution systems. The major contribution is to alleviate the PQ issues by employing novel multi-devices unified power-quality conditioner (MDsUPQC) topology in a multi-feeder distribution system. This MDsUPQC comprises multiple voltage source inverter (VSI) devices connected with a common direct current-link (DC-link) capacitor which is controlled by a proportional-integral (PI) controller. However, this controller has some technical issues that are not suited for the regulation of common DC voltage at the desired level because of improper selection of gain values. The contribution of this work is proposing an intelligent fuzzy-logic (FL) DC-link controller-driven MDsUPQC device which evidences the intelligent knowledge base for better regulation of PQ issues. The technique and performance of the suggested strategy for PQ improvement, load sharing between feeders, and simulation results are presented with comparative analysis utilizing the MATLAB/Simulink software tool.
A novel solar PV integrated fuzzy-logic controlled UAPQC device for power quality enhancement Rao, Lingineni Shanmukha; Sharma, Pidatala Prabhakara; Shankar, Maddiguntla Bhavani; Sakethnath, Sakila Venkata; Kumar, Govindu Bharat
International Journal of Advances in Applied Sciences Vol 13, No 1: March 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijaas.v13.i1.pp13-23

Abstract

A novel solar photovoltaics (PV) connected unified active power quality conditioner (UAPQC) device is extensively adopted for enhancing the voltage and current quality of the distribution system. In a three-phase distribution system, the proposed UAPQC mitigates both load-side and source-side allied power quality (PQ) issues. Furthermore, as part of the distributed generation (DG) system, active electricity from solar PV is injected into the grid or source when solar PV is available. In this regard, the proposed UAPQC has been operated by using a workable control method, in both PQ improvement mode and DG incorporation mode. The direct current-link (DC-link) control of the shunt voltage source inverter (VSI) utilizes the proportional-integral controller, which is not suited for the regulation of DC-link voltage at the desired level because of improper selection of gain values. In this work, an intelligent fuzzy-logic DC-link control of UAPQC evidences the intelligent knowledge base for better regulation of power-quality issues. The suggested fuzzy-logic controlled UAPQC device's performance for both PQ improvement and integration of DG is validated using the MATLAB/Simulink computing tool, and simulation findings are given with an appealing comparison analysis.