Claim Missing Document
Check
Articles

Found 1 Documents
Search

Mechanical Performance of Alkali-Treated Rattan Strips with Epoxy Coating for Sustainable Composite Applications Kalatharan, Sujentheran Nair; Imran, Al Ichlas; Irawan, Agustinus Purna; Siregar, Januar Parlaungan; Cionita, Tezara; Fitriyana, Deni Fajar; Anis, Samsudin; Dewi, Rozanna; Setyoadi, Yuris; Wisnu Prayogo
Advance Sustainable Science Engineering and Technology Vol. 7 No. 3 (2025): May - July
Publisher : Science and Technology Research Centre Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/asset.v7i3.2017

Abstract

The use of natural materials like rattan in eco-friendly composites is gaining attention in materials engineering. However, its hydrophilic nature and interaction with other materials can affect mechanical strength. This study investigates how variations in rattan size and alkali treatment influence the tensile properties of single rattan strips through an epoxy dipping process. Rattan was prepared with varying lengths (5–15 cm), widths (3–8 mm), and a consistent thickness (0.5 mm). Alkali treatment used 5% and 10% NaOH concentrations for 1 and 24 hours. Tensile testing showed that a 5 cm × 8 mm strip achieved the highest tensile strength (49.95 MPa), Young's modulus (3562.77 MPa), and low strain (5.4%), while the 15 cm × 3 mm strip had the lowest strength (9.48 MPa) and modulus (475.69 MPa) with higher strain (10.32%). A 5% NaOH treatment for 24 hours improved adhesion and performance, while 10% caused degradation.