<![CDATA[Environmental issues related to waste from brick manufacturers are issues that need further attention. Nowadays, a lot of research has been carried out on the use of waste materials regarding their benefits in the field of construction projects, especially in concrete mixtures. With the hope that the issue of environmental problems related to the lack of handling of industrial waste can be a solution to overcome the challenges of the availability and price of conventional materials used in construction projects nowdays. In this research, a study was conducted to determine the impact of using brick ash as a filler on the Asphalt Concrete-Wearing Course (AC-WC) pavement layer which functions as a wear layer, by using the Marshall tool test and the parameters used to measure the performance of the asphalt mixture, such as VIM, VFB and MQ values. The research method uses a laboratory testing approach at PT. Bumi Karsa and uses local materials originating from West Sulawesi Province. The use of variations in the addition of brick ash content of 1%, 2%, 3%, 4% and 5% resulted in the optimum asphalt content value of 6.15% in the planning of the AC-WC mixture and soaked for 30 minutes. From the test results it was found that the effect of adding brick ash as a filler on the stability and flow values gets a high value if the content limit at variation 3%. In other parameter values some cannot be used because the results obtained on several parameters do not meet the requirements specified in the 2018 Bina Marga Specifications for Division 6 Road works.]]>
Copyrights © 2023
