Jurnal Penelitian Hasil Hutan
Vol. 43 No. 1 (2025): Jurnal Penelitian Hasil Hutan

PENINGKATAN KUALITAS GONDORUKEM DENGAN VARIASI KONSENTRASI TERPENTIN PADA PENCUCIAN GETAH PINUS

Syaifuddin, Afif (Unknown)
Sa'diyah, Khalimatus (Unknown)
Prasetya, Desta Enggar Dwi (Unknown)



Article Info

Publish Date
17 May 2025

Abstract

Gum rosin, commonly called gondorukem, is a product derived from processing pine sap, possessing significant potential for international market competition. However, the demand for exports from Indonesia has decreased annually due to the gondorukem's quality not meeting market standards. This study investigates the impact of turpentine concentration in the pine resin washing process on the quality of the produced gondorukem. The research was conducted in two stages: sap purification and distillation. In the sap purification process, 1250 grams of pine sap were dissolved using turpentine at 80°C, with varying turpentine concentrations of 27.5%, 28.5%, 29.5%, 30.5%, 31.5%, 32.5%, and 33.5%. This was followed by adding 5% oxalic acid, precipitation for 30 minutes, washing with distilled water, and separation. The washed oleo pine resin, weighing 1100 grams, was then distilled at 175°C for 2-3 hours. Results indicate that higher concentrations of turpentine lead to increased acid value, softening point, and color scale, resulting in purer and darker gondorukem. However, adding turpentine tends to reduce yield while causing fluctuations in nonvolatile parameters. The highest quality gondorukem was obtained at a turpentine concentration of 29.5%, with the following specifications: acid value of 191.24 mg KOH/gram, color scale of 6.9 (WW quality), softening point of 79°C, nonvolatile content of 99.23%, and yield of 75.08%.

Copyrights © 2025






Journal Info

Abbrev

jphh

Publisher

Subject

Agriculture, Biological Sciences & Forestry Decision Sciences, Operations Research & Management Materials Science & Nanotechnology

Description

Jurnal Penelitian Hasil Hutan is a scientific publication reporting research findings in the field of anatomy, physical and mechanical, fiber technology, composite, biodeterioration and preservation of lignocellulosic materials, forest products drying technology, wood sawing and machining, wood and ...