Energy, Materials and Product design
Vol. 3 No. 1 (2024): Energy, Materials and Product Design

STUDY PENGEREMEN PADA MOBIL LISTRIK HASIL MODIFIKASI

Triadi, A.A. Alit (Unknown)
Zainuri, Achmad (Unknown)
Suartika, I Made (Unknown)
Sayoga, I Made Adi (Unknown)
Mara, I Made (Unknown)
Okariawan, I Dewa Ketut (Unknown)



Article Info

Publish Date
31 May 2024

Abstract

Every three accidents occur every hour in Indonesia, according to the Director of Road Traffic at the Ministry of Land Transportation, with a percentage of over 50-70 percent and 30 percent of accidents occur due to poor performance of the brake system. Accidents occur due to insufficient braking distance and lack of understanding of the braking characteristics of the vehicle being driven. The aim of this research is to analyze the distance, time and braking force required for an electric car to move until it stops with variations in speed and vehicle load. This research was carried out using an experimental method where a prototype electric car was run by varying the speed and load of the vehicle to obtain braking time and distance and analyzing the data obtained. The shortest braking distance at a speed of 20 km/hour with a vehicle load of 950 kg is 4.39 meters. The longest braking distance is 14.78 meters at a speed of 40 km/hour with a vehicle load of 1050kg. The fastest braking time is at a speed of 20 km/hour with a vehicle load of 950 kg, namely 1.97 seconds. The longest braking time was at a speed of 40 km/h with a vehicle load of 1050 kg, namely 2.76 seconds. The smallest braking force is at a speed of 20 km/hour with a vehicle load of 1050 kg, namely 2098.36 N. The largest braking force is at a speed of 40 km/hour with a vehicle load of 950 kg, namely 4132.65 N.

Copyrights © 2024






Journal Info

Abbrev

empd

Publisher

Subject

Automotive Engineering Control & Systems Engineering Energy Engineering Industrial & Manufacturing Engineering

Description

Energy, Materials and Product Design is an open-access journal and published by the Department of Mechanical Engineering, Faculty of Engineering, University of Mataram, Mataram, West Nusa Tenggara, Indonesia. Articles that have been approved and published in journals can be accessed by everyone at ...