TAPAK (Teknologi Aplikasi Konstruksi) : Jurnal Program Studi Teknik Sipil
Vol 15, No 2 (2026): Mei 2026

PERKUATAN BALOK BETON BERTULANG AKIBAT TEGANGAN TARIK MENGGUNAKAN SERAT SABUT KELAPA

Permatasari, Diana (Unknown)
Amran, Yusuf (Unknown)
Oktavia, Chica (Unknown)



Article Info

Publish Date
20 May 2026

Abstract

This study aims to examine the effect of horizontally arranged coconut coir fibers with varying spacing on the flexural tensile strength of concrete. The research was conducted experimentally in a laboratory using a planned concrete strength of fs 45 MPa. The test specimens were concrete beams measuring 15 × 15 × 60 cm with a total of 9 specimens, consisting of normal concrete, concrete with coconut coir fibers spaced at 2.5 cm, and concrete with coconut coir fibers spaced at 5 cm. Flexural tensile strength testing was carried out at the age of 28 days using the two-point loading method in accordance with SNI 4431:2011.The results indicate that the addition of horizontally arranged coconut coir fibers significantly increases the flexural tensile strength of concrete. Concrete with a fiber spacing of 2.5 cm showed an increase in flexural tensile strength of 47.6% compared to normal concrete, while concrete with a fiber spacing of 5 cm exhibited an increase of 13.9%. Closer fiber spacing provides a more optimal improvement in flexural tensile strength due to the ability of the fibers to restrain and distribute tensile stresses within the concrete. This study demonstrates that coconut coir fiber has strong potential as an environmentally friendly and sustainable concrete admixture

Copyrights © 2026






Journal Info

Abbrev

tapak

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Control & Systems Engineering Engineering Mechanical Engineering Transportation

Description

TAPAK ISSN: 2548-6209 (Electronic) & ISSN: 2089-2098 (Print) adalah jurnal peer-review yang menerbitkan artikel ilmiah dari disiplin ilmu teknik sipil, yang mencakup bidang studi : • Bahan bangunan dan bangunan, • Mekanika dan fisika struktural, • Rekayasa geoteknik, • Rekayasa jalan dan ...