Jurnal Pensil : Pendidikan Teknik Sipil
Vol. 15 No. 3 (2026): Jurnal Pensil : Pendidikan Teknik Sipil

EVALUATION OF CONCRETE PERFORMANCE OF CONCRETE MADE WITH STEEL TURNING WASTE FOR RIGID ROAD PAVEMENT

Anggara Yulian Pradana (Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember)
Muhtar (Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember)
Senki Desta Galuh (Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember)
Nanang Saiful Rizal (Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember)
Rian Bagus Setiawan (Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember)



Article Info

Publish Date
30 Sep 2026

Abstract

Concrete for rigid pavements requires sufficient mechanical strength to withstand repeated traffic loads. This study examines the effect of steel turning waste as an additive on the mechanical properties of concrete, particularly in terms of compressive and flexural strength. Experimental research was conducted in a laboratory using concrete mixtures containing 0%, 10%, and 15% steel turning waste by weight of cement. Cylindrical test specimens with dimensions of 15 × 30 cm were used for compressive strength testing, while beam-shaped test specimens measuring 15 × 15 × 60 cm were used for flexural strength testing. Testing was conducted at 7 and 28 days of age. At 7 days of age, the mixture with a 10% content recorded the highest compressive strength of 20.44 MPa, while the 15% mixture reached 19.48 MPa. At 28 days, the compressive strength increased to 29.07 MPa for the 10% mixture and 31.56 MPa for the 15% mixture, compared to normal concrete, which reached only 22.51 MPa. The 15% mixture also recorded the highest flexural strength at 28 days, at 4.03 MPa, higher than that of normal concrete at 3.17 MPa, representing an increase of approximately 27.1%. Although flexural strength decreased at 7 days with increasing waste content, the 15% mixture showed the highest mechanical performance at 28 days. The results indicate that steel turning waste can improve the compressive and flexural strength of concrete under the tested laboratory conditions.

Copyrights © 2026






Journal Info

Abbrev

jpensil

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Education Other

Description

In general, the Jurnal Pensil : Pendidikan Teknik Sipil accepts manuscripts with the themes: Education Strategy and Management, Industrial Relations, and Civil and Structural Engineering. Jurnal Pensil : Pendidikan Teknik Sipil is intended for all academics in Civil Engineering Vocational Education. ...