Teknika
Vol. 21 No. 2 (2026): Oktober

Influence of Mix Design Parameters on the Fresh and Compressive Strength of Steel Fiber-Reinforced Self-Compacting Geopolymer Concrete

Trias Widorini (Universitas Semarang)
Antonius (Unversitas Islam Sultan Agung)
Sumirin (Unversitas Islam Sultan Agung)



Article Info

Publish Date
22 Oct 2026

Abstract

Self-compacting geopolymer concrete (SCGC) is a sustainable alternative to ordinary Portland cement (OPC)-based concrete because it combines the environmental benefits of geopolymer binders with the superior workability of self-compacting concrete. This study investigated the effects of the water-to-binder (W/B) ratio, alkaline activator-to-fly ash (AAS/FA) ratio, and superplasticizer dosage on the fresh and compressive strength performance of fly ash-based SCGC reinforced with 1% straight steel fibers under ambient curing conditions. Two mixture formulations were evaluated. Fresh properties were assessed using slump flow, V-funnel, and L-box tests in accordance with EFNARC (2005), while compressive strength was determined at 7, 28, and 56 days. SCGC-B (W/B = 0.075, AAS/FA = 0.35, superplasticizer = 4.5%) exhibited the best performance, achieving a slump flow of 705 mm, a V-funnel flow time of 9 s, an L-box ratio of 0.89, and compressive strengths of 15.08, 26.40, and 33.52 MPa at 7, 28, and 56 days, respectively. The results demonstrate that optimizing mixture composition enables the production of structural-grade SCGC satisfying EFNARC requirements under ambient curing conditions. This study also provides an experimental basis for the development and optimization of sustainable geopolymer concrete using locally available Class F fly ash.

Copyrights © 2026






Journal Info

Abbrev

teknika

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Engineering Environmental Science Transportation

Description

Jurnal Teknika merupakan jurnal untuk menyebarluaskan hasil penelitian atau pemikiran dibidang Teknik Sipil. Hasil penelitian yang dipublikasikan dalam jurnal ini difokuskan pada bidang Teknik Sipil dan Rekayasa. Dosen, mahasiswa, dan peneliti diharapkan dapat memanfaatkan jurnal ini untuk berbagi ...