Jurnal Polimesin
Vol 24, No 5 (2026): October

Comparative catalytic pyrolysis of polypropylene waste using natural zeolite and dolomite: effect of temperature on syn-oil yield and fuel properties

Harmen Harmen (Universitas Lampung)
Hadi Prayitno (Department of Mechanical Engineering, Universitas Lampung, Bandar Lampung 35145)
Amrul Amrul (Department of Mechanical Engineering, Universitas Lampung, Bandar Lampung 35145)
Hendi Hidayat (Department of Mechanical Engineering, Universitas Lampung, Bandar Lampung 35145)
Yoga Kurnia (Department of Mechanical Engineering, Universitas Lampung, Bandar Lampung 35145)
Indra Mamad Gandidi (Head of Energy and Bioprocess Technology Laboratory, Department of Chemical Engineering, Universitas Pendidikan Indonesia, Bandung 40154, Indonesia Head of Energy Research on Green Material, Innovation & Application (ENERGIA), Universitas Pendidikan )



Article Info

Publish Date
31 Oct 2026

Abstract

Polypropylene (PP) waste accumulation requires effective thermochemical valorization via catalytic pyrolysis to recover synthetic oil (syn-oil). This study compared the performance of inexpensive natural zeolite and dolomite catalysts under identical fixed-bed reactor conditions. Pyrolysis runs were executed using 1,600 g of post-consumer PP waste (0.5-2 cm) heated via an LPG burner at 400 °C, 450 °C, and 500 °C. Product yields, operational metrics, and syn-oil fuel properties were systematically evaluated. The highest syn-oil yield reached 79.3% using 7% zeolite loading at 400 °C, while the dolomite series achieved its peak yield of 76.9% at 15% loading at 450 °C. Zeolite-derived syn-oil exhibited the maximum energetic properties, producing a calorific value of 45.9 MJ/kg and an octane rating of 78.2 RON. Conversely, increasing the operating temperature to 500 °C accelerated hydrocarbon cracking, which minimized processing time to 30 minutes and minimized external LPG fuel consumption, though it reduced liquid volume recovery due to enhanced gas formation. Factually, natural zeolite at 400 °C is the optimum condition to maximize liquid fuel volume, whereas 15% dolomite at 450 °C offers a viable alternative for decentralized operations. Due to the exploratory nature of the single-observation matrix, replicate experiments and engine testing are recommended before industrial scale-up.

Copyrights © 2026






Journal Info

Abbrev

polimesin

Publisher

Subject

Automotive Engineering Control & Systems Engineering Engineering Materials Science & Nanotechnology Mechanical Engineering

Description

Polimesin mostly publishes studies in the core areas of mechanical engineering, such as energy conversion, machine and mechanism design, and manufacturing technology. As science and technology develop rapidly in combination with other disciplines such as electrical, Polimesin also adapts to new ...