This Author published in this journals
All Journal Jurnal Polimesin
Indra Mamad Gandidi
Head of Energy and Bioprocess Technology Laboratory, Department of Chemical Engineering, Universitas Pendidikan Indonesia, Bandung 40154, Indonesia Head of Energy Research on Green Material, Innovation & Application (ENERGIA), Universitas Pendidikan

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Comparative catalytic pyrolysis of polypropylene waste using natural zeolite and dolomite: effect of temperature on syn-oil yield and fuel properties Harmen Harmen; Hadi Prayitno; Amrul Amrul; Hendi Hidayat; Yoga Kurnia; Indra Mamad Gandidi
Jurnal Polimesin Vol 24, No 5 (2026): October
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v24i5.9145

Abstract

Polypropylene (PP) waste accumulation requires effective thermochemical valorization via catalytic pyrolysis to recover synthetic oil (syn-oil). This study compared the performance of inexpensive natural zeolite and dolomite catalysts under identical fixed-bed reactor conditions. Pyrolysis runs were executed using 1,600 g of post-consumer PP waste (0.5-2 cm) heated via an LPG burner at 400 °C, 450 °C, and 500 °C. Product yields, operational metrics, and syn-oil fuel properties were systematically evaluated. The highest syn-oil yield reached 79.3% using 7% zeolite loading at 400 °C, while the dolomite series achieved its peak yield of 76.9% at 15% loading at 450 °C. Zeolite-derived syn-oil exhibited the maximum energetic properties, producing a calorific value of 45.9 MJ/kg and an octane rating of 78.2 RON. Conversely, increasing the operating temperature to 500 °C accelerated hydrocarbon cracking, which minimized processing time to 30 minutes and minimized external LPG fuel consumption, though it reduced liquid volume recovery due to enhanced gas formation. Factually, natural zeolite at 400 °C is the optimum condition to maximize liquid fuel volume, whereas 15% dolomite at 450 °C offers a viable alternative for decentralized operations. Due to the exploratory nature of the single-observation matrix, replicate experiments and engine testing are recommended before industrial scale-up.