The number of baffles in a shell and tube heat exchanger influences shell-side flow paths and thermal performance. This study analyzes the effects of 4, 6, and 8 baffles on temperature distribution, flow patterns, heat-transfer rate, overall heat-transfer coefficient, and effectiveness using ANSYS Fluent computational fluid dynamics (CFD). Steam flows through the tube side while ethanol flows through the shell side. The inlet temperatures are 250 °C for steam and 45 °C for ethanol, with mass flow rates of 0.4 kg/s and 0.1 kg/s, respectively. The calculated ethanol outlet temperature increases from 54.23 °C with 4 baffles to 57.35 °C with 6 baffles and 63.19 °C with 8 baffles. The average heat-transfer rate increases from 5.87 kW to 6.67 kW and 7.68 kW, respectively. The calculated overall heat-transfer coefficient based on the ethanol-side area rises from 28.75 to 36.14 and 52.27 W/m²·K, while ethanol-side effectiveness increases from 0.045 to 0.060 and 0.088. The baffles produce a zigzag shell side flow path, although recirculation and low-velocity dead zones remain behind the baffles. Among the tested configurations, 8 baffles provide the highest calculated thermal performance. However, the simulated ethanol outlet temperature remains below its normal boiling point, and the single-phase model does not represent actual boiling; therefore, the results indicate comparative sensible-heating performance rather than verified reboiler vaporization.
Copyrights © 2026