Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

International Journal of Science and Engineering (IJSE)

ijse
Website

Published by Universitas Diponegoro

ISSN : - EISSN : - DOI : -

Core Subject : Engineering,

Engineering

The scope of journal covers all area in the application on chemical, physical, mathematical, biological, agricultural, corrossion, and computer science to solve the engineering problems.

Arjuna Subject : -

Articles 13 Documents

1 2

Search results for , issue "Vol 6, No 1 (2014)" : 13 Documents clear

The Potential of Tiger Prawn Fry from Delta Mahakam, East Kalimantan Indonesia Bob Suroso; Johannes Hutabarat; Norma Afiati
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

Most of the life cycle of tiger prawns were estuarine (Delta Mahakam). In the juvenile stage life in estuarine and the adult stage in marine. The research objective is to assess the potential of the tiger prawn fry catches in the Mahakam Delta, as a source of tiger prawn fry in the Mahakam Delta area farms. Research using interviews and descriptive analysis through monitoring with fishermen. The results showed that the fry tiger prawn from the Delta Mahakam there on the beaches or the edge of the sea where the water is shallow and slightly brackish, as in the Delta Mahakam. Fry can be captured by using rumpon. Tiger prawns fry from Delta Mahakam durability is relatively higher than fry from the hatchery. However, the number and continuity of fry very limited because it depends on the season. Abundance of fry is determined by the number of larvae produced in the wild and their survival is greatly influenced by the availability of food. Doi: 10.12777/ijse.6.1.43-46 [How to cite this article: Suroso, B., Hutabarat, J., and Afiati, N. (2013). The Potential of Tiger Prawn Fry from Delta Mahakam, East Kalimantan Indonesia, International Journal of Science and Engineering, 6(1),43-46. Doi: 10.12777/ijse.6.1.43-46

Parameterization adaption for 3D shape optimization in aerodynamics Badr Abou El Majd
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

When solving a PDE problem numerically, a certain mesh-refinement process is always implicit, and very classically, mesh adaptivity is a very effective means to accelerate grid convergence. Similarly, when optimizing a shape by means of an explicit geometrical representation, it is natural to seek for an analogous concept of parameterization adaptivity. We propose here an adaptive parameterization for three-dimensional optimum design in aerodynamics by using the so-called “Free-Form Deformation” approach based on 3D tensorial Bézier parameterization. The proposed procedure leads to efficient numerical simulations with highly reduced computational costs.[How to cite this article: Majd, B.A.. 2014. Parameterization adaption for 3D shape optimization in aerodynamics. International Journal of Science and Engineering, 6(1):61-69. Doi: 10.12777/ijse.6.1.61-69

Comparison the physicochemical properties of bunch press fibre cellulose and cyclone fibre cellulose of waste from industry Crude Palm Oil (CPO) Irfan Gustian; Eka Angasa; G Ghufira; M Miliani; H Hairulumah
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

Study on comparison the physicochemical properties of bunch press fibre cellulose (Bpfc) and cyclone fibre cellulose (Cfc) wastes from industry Crude Palm oil (CPO) have been performed. The physicochemical properties both of celluloses have been done such as the average degree of polymerization (DP), solubility properties, functional group analysis, thermal properties and X-ray diffraction patterns. The average degrees of polymerization (DP) have been obtained 2195 and 567 for Bpfc and Cfc. Bunch press fibre cellulose and cyclone fibre cellulose were soluble in cupriethylenediamine (CED). FT-IR analysis showed the same pattern of spectrum but different intensities. Thermal stability of bunch press fibre cellulose and cyclone fibre cellulose remains stable up to a temperature of 250 °C. Glass transition bunch press fibre cellulose greater than the glass transition cyclone fibre cellulose and X-ray diffraction pattern shows the same pattern and intensity varies.

Analysis of Erosion Level Using Map Windows Agricultural Non-point Source Pollution (MWAGNPS) on Jeneberang Sub-watershed South Sulawesi Province Ahmad Rifqi Asrib; M. Yanuar J. Purwanto; Sukandi S; E Eriza
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

The aims of this study was to obtain information about the level of soil erosion in Jeneberang sub watershed, as well as the impact of land management and information to determine the direction of land management in the watershed. The approach model used is MWAGNPS. MWAGNPS Model is a model of cell-based rainfall events with the main components are topographic maps, land use and soil type. This model is able to determine the source of erosion and the erosion that occurs. Simulation model showed when Jeneberang watershed has 31.66 mm of rain events with 30-minute rainfall intensity (EI30) can caused erosion 44.81 tons / ha and the sedimentation rate is 2,22 tons / ha. The source of erosion in Jeneberang sub watershed from farm/moor caused erosion is 29552.14 tons / ha and a total of 4,562,625.84 tons of sediment.

Subsurface Structure in Japan Based on P and S waves Travel Time Analysis Using Genetic Algorithm in Japan Seismological Network A. M. Miftahul Huda; Bagus Jaya Santosa
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

Experiment to obtain the subsurface structure in Japan is conducted using seismograms analysis of earthquakes in Japan. All 101 data was used from events in 2012, selected by a maximum depth of 60 km and magnitude between 4.2 to 5.5 Mj. Determination of 1-D subsurface structure is done by utilizing the inversion method with genetic algorithm approach. P wave and S wave velocity structure are determined based on arrival times at receiver. The crustal thickness is known of 33,66 km. P wave velocity for the upper and lower crust, are 6,03 km/s and 6,92 km/s, respectively, and velocity in the upper mantle is 8,18 km/s. S wave velocity for the upper and lower crust are given 3,38 km/s and 3,89 km/s respectively, and the velocity in the upper mantle is 4,59 km/s. If the range integrated to the stable parameter of velocity structure, it shows stable result and the subsurface structure has sufficiently high compatibility.

Dynamic Mechanical and Gel Content Properties of Irradiated ENR/PVC blends with TiO2 Nanofillers Nur Azrini Ramlee; Chantara Thevy Ratnam; Nur Hashimah Alias; Mohd Faizal Abd Rahman
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

Numerous studies reported on irradiated epoxidized natural rubber/polyvinyl chloride (ENR/PVC) blends and the blends were found miscible at all compositional range thus it offers a broad of opportunity in modifying the blend characteristic. Addition of low loading titanium dioxide (TiO2) nanofillers in the ENR/PVC blends has shown a remarkable increment in tensile strength. Thus, this study was initiated to address the effect of TiO2 nanofillers on ENR/PVC blends dynamic mechanical and gel content properties and its morphology upon exposure to electron beam irradiation. ENR/PVC blends with addition of 0, 2 and 6 phr TiO2 nanofillers were first blended in a mixing chamber before being irradiated by an electron beam accelerator at different 0-200 kGy irradiation doses. The influence of TiO2 nanofillers on the irradiation crosslinking of ENR/PVC blends was study based on the dynamic mechanical analysis which was carried out in determining the glass transition temperature and the storage modulus behavior of ENR/PVC blends incorporated with TiO2 nanofillers. Formations of irradiation crosslinking in the blend were investigated by gel content measurement. While, the TiO2 nanofillers distribution were examined by Transmission Electron Microscope (TEM). Upon irradiation, the ENR/PVC/6 phr TiO2 formed the highest value of gel fraction. For dynamic mechanical analysis, it was found that electron beam radiation increased the Tg of all the compositions. The relationship between the crosslinking and the stiffness of the nanocomposites also can be found in this study. The enhancement in the storage modulus and Tg at higher amount of TiO2 in the blend could be correlated to the enhancement of the irradiation-induced crosslinking in the nanocomposites characteristic and also with the higher agglomerations of TiO2 evidence shown from the TEM micrograph examination. Lastly, the dimensions of TiO2 in the blends were found less than 100 nm in diameter which indicates incorporation of TiO2 nanofillers in ENR/PVC blends is potentially to provide the nanocomposites features. Doi: 10.12777/ijse.6.1.24-30 [How to cite this article: Ramlee, N.A., Ratnam, C.T., Alias, N.H., Rahman, M.F.A.. 2014. Dynamic Mechanical and Gel Content Properties of Irradiated ENR/PVC blends with TiO2 Nanofillers. International Journal of Science and Engineering, 6(1),24-30. Doi: 10.12777/ijse.6.1.24-30]

Replacing Sugar by Date Syrup in Gaz and Investigation of Texture Properties Fateme Raiesi Ardali; Zahra Nilchian; Saeid Ahmadi; Mohammad Ali Shariati; Mina Akbarian
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

Date Syrup is a natural sweetener that is suitable replacement for sugar in food stuffs formulation. In this Research Amounts of 25-100 percent of sugar in Gaz formulation were replaced with date syrup and to study effect of its use in product formulation, characteristics of texture, color and sensory analyse of treatments were investigated. Statistical analyse of data was also done by SPSS software and Dankan test. The results of this research showed that amount of used date syrup in formulation had a significant effect on color parameters (L*,a*,b*), texture characteristics and sensory analyse of samples. By increase of date syrup in Gaz formulation, samples texture became softer than control sample and yellowness and redness index of samples were increasedDoi: DOI: 10.12777/ijse.6.1.11-15 [How to cite this article: Shafiei, Z., Hojjatoleslami, M., Soha, S., and Shariati, M.A. 2014. The Influence of Malt Extraction Adding to UF Fresh Low Fat Cheese on Its Textural Properties. International Journal of Science and Engineering, 6(1):57-60. Doi: 10.12777/ijse.6.1.11-15

Reservoir Operation to Minimize Sedimentation Dyah Ari Wulandari; Djoko Legono; Suseno Darsono
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

The Wonogiri Reservoir capacity decreases rapidly, caused by serious sedimentation problems. In 2007, JICA was proposed a sediment storage reservoir with a new spillway for the purpose of sediment flushing / sluicing from The Keduang River. Due to the change of reservoir storage and change of reservoir system, it requires a sustainable reservoir operation technique. This technique is aimed to minimize the deviation between the input and output of sediments. The main objective of this study is to explore the optimal Wonogiri reservoir operation by minimizing the sediment trap. The CSUDP incremental dynamic programming procedure is used for the model optimization. This new operating rules will also simulate a five years operation period, to show the effect of the implemented techniques. The result of the study are the newly developed reservoir operation system has many advantages when compared to the actual operation system and the disadvantage of this developed system is that the use is mainly designed for a wet hydrologic year, since its performance for the water supply is lower than the actual reservoir operations.Doi: 10.12777/ijse.6.1.16-23 [How to cite this article: Wulandari, D.A., Legono, D., and Darsono, S., 2014. Reservoir Operation to Minimize Sedimentation. International Journal of Science and Engineering, 5(2),61-65. Doi: 10.12777/ijse.6.1.16-23]

The Effects of Dietary Neutral Detergent Fiber Ratio from Forage and Concentrate on The Dietary Rumen Degradability and Growth Performance of Philippine Native Goats (Capra hircus Linn.) Dwiatmoko Nugroho; Sunarso Sunarso; Cesar C. Sevilla; Amado A. Angeles
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

This research’s objective was to determine the dietary rumen degradability and growth performances of goats fed dietary treatments. 18 native female goats (live weight of 7.96 ± 2.21 kg) were grouped into 6 classes for the feeding trial and 3 male mature goats with rumen cannula were used for the in situ digestibility. The three dietary treatments were: T1 - 72:28 Forage-Concentrate NDF ratio; T2 - 64:36; and T3 - 57:43. The rate of rumen degradability of DM and CP at 0 hours, potentially degradable fraction (b) and the rate of degradation of b were not affected by dietary treatments. The different ratios of NDF in the diets significantly affected the intake of DM, CP and NDF from forage and concentrates. Treatment diets affected the total intake of DM, CP and NDF of the animals. However, growth performance was not affected by the treatments showing the same production efficiency. This means that diets given to native goats with ratio of forage NDF of 72.07% can be applied since the value of the output and efficiency of feed utilization had the same value compared to diets ratio of forage NDF of 57.21%.

Increasing Biogas Production Rate from Cattle Manure Using Rumen Fluid as Inoculums Budiyono Budiyono; I Nyoman Widiasa; Seno Johari; S Sunarso
International Journal of Science and Engineering Vol 6, No 1 (2014)
Publisher : Chemical Engineering Diponegoro University

In this study, rumen fluid of animal ruminant was used as inoculums to increase biogas production rate from cattle manure at mesophilic condition. A series of laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure (M) was fed to each biodigester and mixed with rumen fluid (R) and tap water (W) in several ratio resulting six different M:W:R ratio contents i.e. 1:1:0; 1:0.75:0.25; 1:0.5:0.5; 1:0.25:0.75; and 1:0:1 (correspond to 0; 12.5; 25, 37.5; 50, and 100 % rumen, respectively) and six different total solid (TS) contents i.e. 2.6, 4.6, 6.2, 7.4, 9.2, 12.3, and 18.4 %. The operating temperatures were at room temperature. The results showed that the rumen fluid inoculated to biodigester significantly effected the biogas production. Rumen fluid inoculums caused biogas production rate and efficiency increase more than two times in compare to manure substrate without rumen fluid inoculums. The best performance for biogas production was the digester with rumen fluid and TS content in the range of 25-50 % and 7.4 and 9.2 %, respectively. These results suggest that, based on TS content effects to biogas yield, rumen fluid inoculums exhibit the similar effect with other inoculums. Increasing rumen content will also increase biogas production. Due to the optimum total solid (TS) content for biogas production between 7-9 % (or correspond to more and less manure and total liquid 1:1), the rumen fluid content of 50 % will give the best performance for biogas production. The future work will be carried out to study the dynamics of biogas production if both the rumen fluid inoculums and manure are fed in the continuous system Doi: 10.12777/ijse.6.1.31-38 [How to cite this article: Budiyono, Widiasa, I.N., Johari, S. and Sunarso. (2014). Increasing Biogas Production Rate from Cattle Manure Using Rumen Fluid as Inoculums. International Journal of Science and Engineering, 6(1),31-38. Doi: 10.12777/ijse.6.1.31-38]

Page 1 of 2 | Total Record : 13

1 2

Filter by Year

2014 2014

Filter By Issues

All Issue Vol 13, No 1 (2019) Vol 10, No 2 (2016) Vol 10, No 1 (2016) Vol 9, No 2 (2015) Vol 9, No 1 (2015) Vol 8, No 2 (2015) Vol 8, No 1 (2015) Vol 7, No 2 (2014) Vol 7, No 1 (2014) Vol 6, No 2 (2014) Vol 6, No 1 (2014) Vol 5, No 2 (2013) Vol 5, No 1 (2013) Vol 4, No 2 (2013) Vol 4, No 1 (2013) Vol 3, No 2 (2012) Vol 3, No 1 (2012) Vol 2, No 2 (2011) Vol 2, No 1 (2011) Vol 1, No 2 (2010) Vol 1, No 1 (2010) ARTICLE IN PRESS More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota semarang,

Jawa tengah

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota semarang, Jawa tengah INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota semarang,

Jawa tengah

INDONESIA