Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

JURNAL SELULOSA

jselulosa
Website

Published by Kementerian Perindustrian Republik Indonesia

ISSN : - EISSN : - DOI : -

Core Subject : Education,

Education

Jurnal Selulosa (JSel) is a journal that provides scientific information resources aimed at researchers and engineers in academia, research institutions, government agencies, and industries. Jurnal Selulosa publishes original research papers, review articles and case studies focused on cellulose, cellulose derivatives, pulp technology, paper technology, environment, biorefinery and other related topics. Formerly known as Berita Selulosa, and the first publication was in 1965. Since 2011, the journal renamed to Jurnal Selulosa.

Arjuna Subject : -

Articles 7 Documents

Search results for , issue "Vol 8, No 01 (2018): JURNAL SELULOSA" : 7 Documents clear

Produksi β-Glukosidase Aspergillus niger BIO 2173 dengan Fermentasi Padat Menggunakan Substrat Dedak Sri Sugiwati; Maggy Thenawidjaja Suhartono; Muhammad Hanafi; Hanifah Nuryani Lioe
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

Production of β-Glucosidase Aspergillus niger BIO 2173 on Solid State Fermentation Using Rice Bran as SubstrateAbstractβ-Glucosidase (EC 3.2.1.21) is a part of the cellulase enzyme complex which acts synergistically with exoglucanase and endoglucanase to hydrolyze cellulose into glucose. The purpose of this study was to obtain the maximum fermentation conditions for production of b-glucosidase Aspergillus niger BIO 2173 with solid state fermentation using rice bran as fermentation substrate. The factors that affect the production of b-glucosidase which consist of initial pH of the fermentation medium, incubation period, ratio of water content to fermentation substrate, incubation temperature and addition of the Mandel’s mineral salts solution were examined in the study. The results showed that maximum fermentation conditions for β-glucosidase production were at initial of fermentation pH of 2,0, incubation period of 7 days, ratio of water content to substrate of 1:1, and incubation temperature of 32oC. Addition of Mandel’s mineral salts solution to the fermentation substrate at maximum fermentation conditions increased the activity and specific activity of β-glucosidase crude extract up to 5,24 ± 0,57 U/mL and 2,46 ± 0,04 U/mg, respectively.Abstrakβ-Glukosidase (EC 3.2.1.21) merupakan bagian dari enzim multi kompleks selulase, yang bekerja secara sinergis dengan eksoglukanase dan endoglukanase menghidrolisis selulosa menjadi glukosa. Tujuan dari penelitian ini adalah mendapatkan kondisi fermentasi maksimum untuk produksi β-glukosidaseAspergillus niger BIO 2173 dengan fermentasi media padat menggunakan substrat dedak. Pengujian dilakukan terhadap faktor-faktor yang mempengaruhi produksi b-glukosidase, yaitu pH awal medium fermentasi, waktu inkubasi, perbandingan kandungan air terhadap substrat medium fermentasi, suhu inkubasi dan penambahan larutan garam mineral Mandels. Hasil penelitian menunjukkan bahwa kondisi fermentasi maksimum untuk produksi b-glukosidase adalah pada pH awal medium fermentasi 2,0; waktu inkubasi 7 hari, perbandingan kandungan air terhadap substrat medium fermentasi 1:1, dan suhu inkubasi 32oC. Penambahan larutan garam mineral Mandels ke dalam substrat fermentasi pada kondisi fermentasi maksimum menyebabkan peningkatan aktivitas dan aktivitas spesifk ekstrak kasar b-glukosidase masing-masing sebesar 5,24 ± 0,57 U/mL dan 2,46 ± 0,04 U/mg protein. Kata kunci: β-glukosidase, Aspergillus niger, dedak padi, fermentasi padat, ekstrak kasar

Potensi Penggunaan Dua Spesies Agave untuk Pembuatan Pulp dan Kertas Arini Hidayati Jamil; Heronimus Judi Tjahjono; Parnidi Parnidi; Marjani Marjani
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

Potential of Two Agave Species for Pulp and Paper MakingAbstractBoth of Agave sisalana and A. cantala are the most favorite agave species for fiber producer plant in Indonesia. Nevertheless, research study for using fiber of A. sisalana and A. cantala for pulp and paper purpose is hard to find. This study aims to observe the characteristics of A. sisalana and A. cantala fibers as a raw material of pulp including fiber morphology, chemical components, pulp characteristics, optical and physical properties of the handsheets. The observation of all characters was based on Indonesian National Standard (SNI). The pulping method used both of soda process with 18% active alkali and kraft process with 18% active alkali and 25% sulfidity. The result of the study for the handsheets from A. sisalana and A. cantala fibers shows that the brightness, dirt, and tear index were fulfilled to SNI standard for NBKP while the tensile index and burst index just fulfilled to SNI standard for LBKP. The handsheet of A. sisalana fiber has a higher tear index, tensile index, and burst index than the A. cantala ones. Soda pulping of both agave species resulting higher pulp yield, cellulose polymerization degrees and physical properties than kraft pulping.Keywords : Agave sisalana, A. cantala, characteristics of the fiber, pulp AbstrakAgave sisalana dan A. cantala merupakan dua spesies agave yang paling banyak dibudidayakan di Indonesia sebagai tanaman penghasil serat alam. Namun penelitian mengenai fungsi serat A. sisalana dan A. cantala sebagai bahan baku pulp dan kertas masih sulit ditemukan. Tujuan dari penelitian ini adalah mempelajari karakteristik serat A. sisalana dan A. cantala sebagai bahan baku pulp yang meliputi morfologi serat, komposisi komponen kimia, karakeristik pulp, sifat optik dan fisik lembaran pulp yang dihasilkan. Pengamatan seluruh karakter dilakukan berdasarkan Standar Nasional Indonesia. Pemasakan menggunakan metode soda dengan alkali aktif 18% dan kraft dengan alkali aktif 18% dan sulfiditas 25%. Hasil pengamatan pada lembaran pulp yang dihasilkan dari serat A. sisalana dan A. cantala menunjukkan bahwa derajat cerah, noda, dan kekuatan sobek memenuhi Standar Nasional Indonesia (SNI) Pulp Kraft Putih Kayujarum (NBKP) sementara kekuatan tarik dan kekuatan retak memenuhi SNI Pulp Krat Putih Kayudaun (LBKP). Lembaran pulp A. sisalana memiliki kekuatan sobek, tarik, dan retak lebih tinggi dibanding lembaran pulp A. cantala. Metode pemasakan soda pada serat kedua spesies agave tersebut menghasilkan rendemen pulp, derajat polimerisasi selulosa, dan kekuatan fisik lebih baik dibanding metode kraft.Kata kunci : Agave sisalana, A. cantala, karakteristik serat, pulp

Pembuatan dan Karakterisasi Dissolving Pulp Serat Panjang dari Bambu Duri (Bambusa blumeana) Chandra Apriana Purwita; Susi Sugesty
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

Preparation and Characterization of Long Fiber Dissolving Pulp from Spiny Bamboo (Bambusa blumeana)The need for long fiber dissolving pulp in Indonesia can only be met from imports. Bamboo is a nonwood plant and known as source of long fiber. This research aims to study the potential of spiny bamboo to be used as raw material for producing long fiber dissolving pulp. This research was conducted using two different types of raw materials preparation to produce bamboo chip and decorticated bamboo. The pulping process is carried out by pre-hydrolysis kraft and bleaching performed with two different bleaching sequences, i.e Do ED1 D2 and Do EpD1 D2 . Based on the experimental results, spiny bamboo has good potential to be used as raw material for dissolving pulp. Spiny bamboo belongs to long fibers with an average fiber length of 2.46 mm. The dissolving quality depends on the preparation of the raw material and the bleaching sequence. The yield of spiny bamboo dissolving pulp ranged from 37.97 - 40.76% with alpha cellulose content of 94.88 - 98.67%, and viscosity of 16.43 - 25.75 cP. Decorticated bamboo with bleaching sequence of Do EpD1 D2 produced the highest quality of dissolving pulp with the highest brightness and alpha cellulose were 89.61% ISO and 98.67%, respectively.AbstrakKebutuhan dissolving pulp serat panjang di Indonesia hanya dapat dipenuhi melalui impor. Bambu adalah tanaman nonkayu dan dikenal sebagai sumber serat panjang. Penelitian ini bertujuan untuk mempelajari potensi bambu duri untuk dijadikan bahan baku pembuatan dissolving pulp serat panjang. Penelitian ini dilakukan dengan dua jenis persiapan bahan baku yang berbeda untuk menghasilkan serpih bambu dan bambu dekortikasi. Proses pemasakan dilakukan dengan proses pra-hidrolisis kraft dan pemutihan dilakukan dengan dua urutan pemutihan yang berbeda, yaitu DoED1D2 dan DoEpD1D2. Berdasarkan hasil penelitian, bambu duri memiliki potensi yang baik untuk digunakan sebagai bahan baku pembuatan dissolving pulp. Bambu duri tergolong serat panjang dengan panjang serat rata-rata 2,46 mm. Kualitas dissolving pup yang dihasilkan tergantung dari persiapan bahan baku dan urutan pemutihan. Rendemen dissolving pulp bambu duri berkisar 37,97 - 40,76%, dengan kandungan selulosa alfa 94,88 - 98,67%, dan viskositas 16,43 - 25,75 cP. Bambu dekortikasi dengan urutan pemutihan DoEpD1D2 menghasilkan dissolving pulp paling unggul dengan derajat cerah dan selulosa alfa tertinggi berturut-turut 89,61 %ISO dan 98,67%.Kata kunci: dissolving pulp, bambu duri (Bambusa blumeana), serpih bambu, bambu dekortikasi, prahidrolisis kraft

Serat Bambu Petung (Dendrocalamus asper) Teralkalisasi sebagai Penguat Komposit Polimer Gunawan Refiadi; Novan Bayu; Hermawan Judawisastra; Mardiyati Mardiyati
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

The alkalized of petung bamboo fiber (Dendrocalamus asper) as reinforcement of polymer compositeAbstractPetung bamboo (Dendrocalamus asper) has good fiber characteristic and it has potential to substitute glass fiber as reinforcement in polymeric composite. However, like other natural based materials, bamboo fiber has a high variability in mechanical properties and inherently hygroscopic characteristic. Therefore it is required to optimize the petung bamboo qualities. The fiber optimization was carried out by alkalization process using NaOH solution with varying concentration of 0, 3, 5, and 10% v/v. Bamboo fiber processed in chemomechanical was used in this investigation. Characterization of density, mechanical and chemicals was conducted by pycnometry method, tensile strength testing, Fourier Transform Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The data variability was analyzed by Weibull distribution. Result indicates that the optimum condition of alkalization process of bamboo fiber using NaOH solution of 5% v/v which has fiber diameter of 175.098 ± 58.017 mm, tensile strength of 384 MPa, and characteristics strength of 390.5 MPa.Keywords: petung bamboo; alkalization; characteristics AbstractBambu petung memiliki karakteristik serat yang baik sehingga berpotensi sebagai pengganti serat gelas untuk penguat komposit polimer. Namun, seperti umumnya serat alam, serat bambu memiliki variabilitas sifat mekanis tinggi dan sifat higroskopik yang inheren. Oleh karena itu diperlukan upaya optimalisasi kinerja serat bambu petung. Optimalisasi kinerja serat dilakukan melalui proses alkalisasi dengan variasi larutan NaOH pada konsentrasi 0, 3, 5, dan 10% v/v. Serat bambu hasil dari proses kimia-mekanik digunakan dalam penelitian ini. Karakterisasi densitas, sifat mekanik, dan sifat kimia serat masing-masing dilakukan dengan metode piknometri, uji tarik, Fourier Transform Spectroscopy (FTIR), Scanning Electron Microscopy (SEM). Analisis variabilitas data menggunakan distribusi Weibull. Hasil menunjukkan bahwa kondisi optimum alkalisasi serat bambu petung yaitu menggunakan larutan NaOH 5% v/v yang menghasilkan serat berdiameter 175,098 ± 58,017 mm, kekuatan Tarik 384 MPa, dan kekuatan karakteristik 390,5 MPa.Kata kunci: bambu petung; alkalisasi; karakteristik

Pemanfaatan Lumpur Primer Industri Kertas sebagai Absorben Krisna Adhitya Wardhana; Saepulloh Saepulloh; Reynaldo Biantoro
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

The Utilization of Primary Sludge from Paper Mills as AbsorbentAbstractThe primary sludge from paper mill contains cellulose fiber that has high absorption capacity and potential to be used as an absorbent for hydrophobic compounds. The utilization of primary sludge from paper mill using raw material of waste paper and virgin pulp to be used as an absorbent has been conducted. The stages process of absorbent fabrication was consisted of three stages such as drying, mechanical and chemical processes. Mechanical process conducted were crushing and grinding methods to increase surface area and pore volume of sludge. Meanwhile silanization process as chemical treatment using solution of γ-metacryloxypropyl trimethoxysilane in ethanol to improve the hydrophobic properties of primary sludge was also done. Absorbent products were tested for the maximum sorbency, the sorbent performance, absorption of hydrophobic liquid, absorption of hydrophobic dust, and contact angle test to conduct their performance. The absorbency of absorbent product which is covered by cushion material was also tested. Result indicated that the absorption performance of some absorbent product is higher than commercial absorbent on hydrophobic liquid and hydrophobic dust absorption test. But it was lower than commercial absorbent on maximum sorbency and the sorbent performance test. The use of cushion material as a wrapper could make it easy in the collection and could increase the absorbency.Keywords: primary sludge; mechanical; silanization; absorbent; hydrophobic AbstrakLumpur primer dari industri kertas mengandung serat selulosa yang memiliki daya serap tinggi dan memiliki potensi dimanfaatkan sebagai absorben senyawa hidrofobik. Pemanfaatan lumpur primer industri kertas berbahan baku kertas bekas dan virgin pulp sebagai absorben telah dilakukan. Tahapan proses pembuatan absorben dari lumpur primer meliputi proses pengeringan, proses mekanis, dan proses kimia. Proses mekanis yang dilakukan adalah crushing dan grinding untuk meningkatkan luas permukaan dan volume pori-pori lumpur dilanjutkan dengan proses silanisasi (silanization) sebagai perlakuan kimia menggunakan larutan γ-metacryloxypropyl trimethoxysilane dalam etanol untuk meningkatkan sifat hidrofobik lumpur. Produk absorben diuji daya serap maksimum (maximum sorbency), kinerja absorben, penyerapan cairan hidrofobik, penyerapan debu hidrofobik, dan pengujian sudut kontak. Daya serap produk absorben yang ditutup bahan bahan cushion juga diuji. Hasil menunjukkan kemampuan absorbsi cairan hidrofobik dan debu hidrofobik dari beberapa perlakuan produk absorben lebih tinggi dari absorben komersial, sedangkan hasil maximum sorbency dan uji kinerja absorben menunjukkan hasil lebih rendah dari absorben komersial. Penggunaan bahan cushion sebagai pembungkus dapat memudahkan dalam pengumpulan dan dapat meningkatkan penyerapan.Kata kunci: lumpur primer; mekanis; silanisasi; absorben; hidrofobik

Front Cover Risdianto, Hendro
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

Preface Risdianto, Hendro
JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA
Publisher : Center for Pulp and Paper

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (246.249 KB)

Page 1 of 1 | Total Record : 7

Filter by Year

2018 2018

Filter By Issues

All Issue Vol 12, No 02 (2022): JURNAL SELULOSA Vol 12, No 01 (2022): JURNAL SELULOSA Vol 11, No 02 (2021): JURNAL SELULOSA Vol 11, No 01 (2021): JURNAL SELULOSA Vol 10, No 02 (2020): JURNAL SELULOSA Vol 10, No 01 (2020): JURNAL SELULOSA Vol 9, No 02 (2019): JURNAL SELULOSA Vol 9, No 01 (2019): JURNAL SELULOSA Vol 8, No 02 (2018): JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA Vol 8, No 01 (2018): JURNAL SELULOSA Vol 7, No 02 (2017): JURNAL SELULOSA Vol 7, No 01 (2017): JURNAL SELULOSA Vol 6, No 02 (2016): JURNAL SELULOSA Vol 6, No 01 (2016): JURNAL SELULOSA Vol 5, No 02 (2015): JURNAL SELULOSA Vol 5, No 01 (2015): JURNAL SELULOSA Vol 4, No 02 (2014): JURNAL SELULOSA Vol 4, No 01 (2014): JURNAL SELULOSA Vol 3, No 02 (2013): JURNAL SELULOSA Vol 3, No 01 (2013): JURNAL SELULOSA Vol 2, No 02 (2012): JURNAL SELULOSA Vol 2, No 01 (2012): JURNAL SELULOSA Vol 1, No 02 (2011): JURNAL SELULOSA Vol 1, No 01 (2011): JURNAL SELULOSA Vol 45, No 02 (2010): BERITA SELULOSA Vol 45, No 01 (2010): BERITA SELULOSA Vol 44, No 02 (2009): BERITA SELULOSA Vol 44, No 01 (2009): BERITA SELULOSA Vol 43, No 02 (2008): BERITA SELULOSA Vol 43, No 01 (2008): BERITA SELULOSA Vol 42, No 02 (2007): BERITA SELULOSA Vol 42, No 01 (2007): BERITA SELULOSA Vol 41, No 02 (2006): BERITA SELULOSA Vol 41, No 01 (2006): BERITA SELULOSA Vol 40, No 2 (2005): Berita Selulosa Vol 39, No 2 (2004): Berita Selulosa Vol 1, No 2 (1965): BERITA SELULOSA Vol 1, No 1 (1965): BERITA SELULOSA More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota adm. jakarta selatan,

Dki jakarta

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota adm. jakarta selatan, Dki jakarta INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota adm. jakarta selatan,

Dki jakarta

INDONESIA