Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Journal of the Civil Engineering Forum

JCEF
Website

Published by Universitas Gadjah Mada

ISSN : 25811037 EISSN : 25495925 DOI : https://doi.org/10.22146/jcef

Core Subject : Engineering,

Civil Engineering, Building, Construction & Architecture

JCEF focuses on advancing the development of sustainable infrastructure and disseminating conceptual ideas and implementing countermeasures, particularly in the tropics, which are vulnerable to disasters. Specifically, we look to publish articles with the potential to make real-world contributions to improving both local communities and countries readiness for and responsiveness to natural and human-made disasters. The particular emphasis of JCEF is given to the civil & environmental engineering researches associated with natural disasters such as geo-disaster (earthquake, landslide, and volcanic eruption), water-related disaster (flood, debris flow, coastal disaster, and tsunami), and human-made disasters such as soil, water, and air pollution and water scarcity. Articles describing the topics of disaster risk reduction techniques, disaster early warning system, climate change adaptation, vulnerability analysis and trends, pre and/or post-disaster reconstruction and rehabilitation planning and management, forensic engineering, the socio-engineering approach for the countermeasures, or water reuse and recycle are particularly encouraged.

Arjuna Subject : Teknik (semua kategori) - Teknik Sipil dan Struktur

Articles 10 Documents

Search results for , issue "Vol. 8 No. 1 (January 2022)" : 10 Documents clear

Analysis of Spatial Distribution of the Drought Hazard Index (DHI) by Integration AHP-GIS-Remote Sensing in Gorontalo Regency Muhammad Ramdhan Olii; Aleks Olii; Ririn Pakaya
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

Several regions across the world are presently experiencing a continuous increase in water scarcity due to the rise in water consumption resulting from population development, agricultural and industrial expansion, climate change, and pollution. Droughts are increasing in recurrence, severity, duration, and spatial extent as a result of climate change. Drought will be one of the most serious threats posed by climate change, often in conjunction with other effects such as rising temperatures and shifting ecosystems. Therefore, this study analyzes the spatial distribution of the Drought Hazard Index (DHI) by integrating AHP-GIS-Remote Sensing in Gorontalo Regency. AHP was used to determine the significance of each map as an input parameter for the DHI, while GIS-Remote Sensing was utilized to supply and analyze all input maps and the study outcome. The DHI assessment consists of four criteria, namely with Normalized Difference Vegetation Index accounting for the highest proportion at 42.9%, followed by Land Surface Temperature (33.6%), Normalized Difference Moisture Index (16.8%), and Topographic Wetness Index (6.7%), with the consistency of the underlying expert opinion measured by the consistency ratio of 0.048. The results indicated that the general hazard of drought in the Gorontalo Regency area was low (43.53%), with 17.87% of the whole area experiencing high hazard. The high class of drought was discovered to be centered in the central region of Gorontalo Regency, which was mostly used for agricultural and economic purposes, thereby enabling policymakers to have evidence to develop management policies suitable for local conditions. Therefore, despite the limits of climatology data, this study established the value of satellite-derived data needed to support policymakers in guiding operational actions to drought hazards reduction.

Factors Affecting Cyclist Behaviours in the Special Region of Yogyakarta Danang Febrianto; Dewanti; Imam Muthohar
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

Bicycle-riding/cycling has reportedly become a new trend in various cities of Indonesia, as well as the Special Region of Yogyakarta, amidst the social restriction applied by the Government to decrease the spreading rate of the COVID-19 virus. This is observed to be a healthier effort in strengthening the immune system during the pandemic. However, the positive growth of this trend is proportional to the increasing data on bicycle accidents. This was due to the increased rate of injured and dead victims from 2017 to 2020. The human behavior factor is also one of the factors causing the high rate of these bicycle accidents. Therefore, this study aims to analyze the factors affecting the behavior of cyclists in the Special Region of Yogyakarta, to reduce the continuous increase of accidents. The data used in this study were the result of the Cyclist Behavior Questionnaire (CBQ) on the Yogyakarta riders. The samples were obtained through the purposive sampling method, using an online questionnaire with a google form and acquiring 362 respondents. Furthermore, the analytical method used was the structural equation modeling (SEM), through the AMOS 22.0 software. The results indicated that the regulation scale directly affected risk perception and cyclist behaviors (risky and positive). However, age only affected their behaviors, which did not directly affect the accidents. The regulation scale then directly affected the risky behavior of cyclists, with risk perception observed as the mediator, implying that the cyclists' knowledge of road safety regulations influenced individual behaviors. In conclusion, these results are expected to be one of the considerations in the policy of the government, to carry out the overall development of transportation, especially bicycles.

Finite Element Modelling of Prestressed Concrete Piles in Soft Soils, Case Study: Northern Jakarta, Indonesia Aswin Lim; Varian Harwin Batistuta; Yiska Vivian Chritiansen Wijaya
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

Jakarta is faced with limited land resources due to its position as the capital city of Indonesia. Therefore, numerous high-rise buildings are being constructed to solve this problem and provide accommodations for a large number of Jakarta residents. Studies have shown that prestressed concrete piles (spun piles) are commonly used as the foundations of high-rise buildings in metropolitan cities across Indonesia, especially in the Northern Jakarta Coastal area, which is predominant with deep soft soils deposit. To further assess and verify the ultimate capacity of the pile, a static loading test was conducted. However, not all results from the field test produced ideal, accurate, precise, and reliable load-settlement curve (until failure) results. Therefore, this study aims to determine the soil properties for the analysis of prestressed concrete spun piles with a diameter of 600 mm in the Northern Jakarta coastal area based on the standard penetration test values (SPT-N). It is a case study of a well-documented static pile load test using the kentledge system. Back analyses were performed by the finite element method to obtain the extrapolated load-settlement curve. Furthermore, the effect of interface strength between pile and soil on the load-settlement curve was also investigated. The results showed that a reduction of interface strength leads to a smaller load–settlement curve. In addition, several geotechnical engineering parameters of soil, such as the undrained shear strength and effective young's modulus, were established using data from an in-situ soil site investigation and empirical correlations with SPT-N.

Optimizing The Functional Performance of Road Network using Vulnerability Assessment to Cope with Unforeseen Road Incidents Mukhammad Rizka Fahmi Amrozi; Raihan Pasha Isheka
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

An Urban Road network is often used for multipurpose trips, due to their transportation functions, such as attractiveness and orientation, as well as social, ecological, and economic features. In Indonesia, road incidents have reportedly increased during the last decade because of a higher frequency of natural hazards, accidents, and on-street mass demonstrations. These incidents are found to degrade or terminate road access, forcing users to utilize alternative routes and decreasing the service performance in adjacent directions. Due to the unexpected occurrences at any location and time, there is a need to investigate the impact of random incidents on road performances. Several accessibility indexes have also been used to evaluate the vulnerability of road networks. However, this is less practical in Indonesia, with the road authority using functional performances as the indicator. This indicates the need for an index to be developed based on road performance parameters. Therefore, this study aims to develop a road performance-based vulnerability index known as the RCI (Road Criticality Index). Combined with a traffic simulation tool, this system is used as an alternative index to assess vulnerabilities, by identifying the road(s) providing worse consequences due to unforeseen incidents. This simulation was conducted by using the PTV Visum, assuming a road section is closed due to the worst incident scenarios. The result showed that the RCI offered a more comprehensive assessment than the existing indicator (volume capacity ratio). The RCI included travel speed and mobility components for evaluating both local and global road performances. With the knowledge of the most vulnerable locations and their consequences, road authorities can prioritize maintenance and development strategies based on the criticality index. Also, preventive measures should be conducted to mitigate risk under a constrained budget. This methodology can be applied to sustainably enhance the resilience of urban road networks.

Organic Removal Treatment Using Microbubble Generator (MBG) in Eutrophic Disorder Condition Tri Yulianti; Sri Puji Saraswati; Johan Syafri Mahathir Ahmad; Wiratni Budhijanto
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

The Techno Park basin, built as an extension of a small tributary of the Code River primarily acts as a retention basin for runoff during the rainy season. It improves the quality of water that has been degraded by domestic wastewater discharge from the surrounding community. Therefore, this study aims to assess the extent to which water quality of the basin can be improved with aeration technology. The aeration technology is a Microbubble Generator (MBG) built using a 100 Watts submersible pump with three horizontal nozzles at a depth of 40 cm from the water surface. Furthermore, the profiles of dissolved oxygen (DO) concentration were measured at the basin’s inlet and outlet, as well as the depths of 1 m below surface water and the bottom of the basin. Diurnal DO was measured to investigate the causes of supersaturation. The aeration performance was also determined from the COD parameters at the inlet and outlet. Discharge measurements were then conducted on the tributary/drainage channel to the inlet basin. The result showed that the DO supersaturation concentration has been attributed to the contribution of photosynthesis from phytoplankton such as algae. Furthermore, no change in DO concentration was observed in a range of 1 m depth from the surface of the water to the bottom (0.3 - 0.14 mg-DO/l). In this eutrophic state, DO increased exponentially during the daytime hours and then decreased during the night. The daily measurement showed an increase in the average DO of 2.31 mg/l (standard deviation of 1.56 mg/l), with average CODinlet fluctuations of 18.79 mg/l (standard deviation of 13.56 mg/l) and average CODoutlet of 14.38 mg/l (standard deviation 2.94 mg/l). Due to additional DO concentration coming from eutrophication during daylight, it was not possible to make a precise assessment of the effectiveness of the MBG aerator.

Seismic Ground Response Analysis of Input Earthquake Motion and Site Amplification Factor at KUET Sonia Akter
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

Ground motion is the movement of the earth's surface due to explosions or the propagation of seismic waves. In the seismic design process, ground response analysis evaluates the impact of local soil conditions during earthquake shaking. However, it is difficult to determine the dynamic site response of soil deposits in earthquake hazard-prone areas. Structural damage has a great influence on the selection of input ground motion, and in this study, the importance of bedrock motion upon the response of soil is highlighted. The specific site response analysis is assessed through “DEEPSOIl" software with an equivalent linear analysis method. Furthermore, four input motions including Kobe, LomaGilroy, Northridge, and Chi-Chi were selected to obtain normalized response spectra. This study aims to obtain the site amplification of ground motion, peak spectral acceleration (PSA), and maximum peak ground acceleration (PGA) based on shear wave velocity from the detailed site-specific analysis of Bangabandhu Sheikh Mujibor Rahman hall at Khulna University of Engineering & Technology. The maximum shear wave velocity obtained was 205 m/s while the amplification factor varied from 4.01 (Kobe) to 1.8 (Northridge) for rigid bedrock properties. Furthermore, the Kobe earthquake produced the highest (4.3g) PSA and the Northridge earthquake produced the lowest (1.08g) PSA for bedrock, with Vs=205 m/s. The surface PGA values were acquired in the range of 0.254g (Northridge) to 0.722g (Kobe), and the maximum strain values for Kobe earthquakes were in the range of 0.016 to .303. Therefore, the surface acceleration values were very high (>0.12g) for the Kobe earthquake motion.

The Analysis of Beam-Column Joint Reinforced with Cross Bars according to SK SNI T-15-1991-03 on Cyclic Loads Zardan Araby; Samsul Rizal; Abdullah; Mochammad Afifuddin
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

The primary structural component supporting the other structural loads in a building is the beam-column joint. It is considered a critical area of a building which needs to be accurately designed to ensure energy is dissipated properly during the occurrence of an earthquake. Beam-column joint has the ability to offer a proper structure required to transform cyclic loads in the inelastic region but also has a direct impact on the components connected to it during the occurrence of any failure. This is one of the reasons the beam-column connection needs to be designed carefully. Therefore, this study focused on designing a beam-column joint with reinforcement according to SK SNI T-15-1991 in order to withstand cyclic loads. The test specimen used was observed to have a concrete compressive strength of 19.17 MPa while the dimension of the beam was 120 x 30 x 40 cm and the column was 30 x 30 x 200 cm, having 8Ø13.4 mm bars with 310.03 MPa yield strength (fy) as well as Ø9.8-100 mm stirrup reinforcement with (fy) 374.59 MPa. The test was initiated through the provision of 0.75 mm, 1.5 mm, 3 mm, 6 mm, 12 mm, 24 mm monotonic cyclic loads at the end of the beam up to the moment the specimen cracked. A maximum load of 68.35 kN for the compression and 49.92 kN for the tension was required to attain the cyclic load capacity. The maximum load was attained at 50.98 mm displacement. Furthermore, beam-column with 23.93 mm displacement caused a reduction in capacity. Meanwhile, the load at 24 mm produced the cycle's highest dissipation energy of 13.25 but this can be increased through the addition of stirrups to provide stiffness in the joint. The stiffness value was also observed to have increased after the structural repairs.

The Building Information Modeling (BIM)-Based System Framework to Implement Circular Economy in Construction Waste Management Tantri N. Handayani; Kartika Nur Rahma Putri; Nurul Alvia Istiqomah; Veerasak Likhitruangsilp
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

The tremendous quantity of waste produced from construction and demolition is a major cause of environmental degradation. This quantity tends to increase due to the rapid growth of building development and renovation. Meanwhile, construction waste management is a complex and costly process due to the fact that it requires different kinds of resources such as money, land, and technology. It is often ignored by all project participants even though it is an essential element of construction project management. However, it has been discovered that modern construction waste management is structured based on the concept of circular economy which focuses on eliminating construction waste and maximizing the value of materials. Therefore, this research proposes an innovative framework to implement the circular economy using building information modeling (BIM) in order to improve the construction waste management process. This involved a thorough review of past literature to identify the implementation of the concept of circular economy, waste management, and the application of BIM, also the research gaps observed were used to develop the functionality of the proposed framework. The five functionalities include (1) visualization and data integration, (2) direct construction waste quantity take-off, (3) BIM-based sorting system and selection of appropriate disposal parties, (4) estimating cost and schedule of waste disposal, and (5) simulation and monitoring report. This BIM system was designed to analyze material waste, quantity, disposal time, and waste treatment based on project conditions, material quantities, and schedule. It can also be used to plan and monitor the construction waste process, thereby making it possible to avoid the disruption of productivity and project time usually caused by unplanned waste management activities. Moreover, the proposed on-site sorting system also has the ability to facilitate the adoption of the circular economy concept during the construction phase.

The Use of Drop-Structures to Increase the Dissolved Oxygen Level along the Cibarani Channel Jonathan Wijaya; Doddi Yudianto; Finna Fitriana
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

The Cikapundung river basin community uses the Cibarani channel as a drainage system and water source for fishing. However, the test result released on 9th November 2020 revealed that the channel’s water quality failed to reach the class II raw water standards due to various domestic waste discharges. This led to the performance of various studies to identify pollution control techniques by limiting the wastewater discharge and quality, controlling the intake discharge, and using baffles. The Cibarani channel has a drop-structure that can improve the water quality, though the effect has not been previously detailed. Therefore, this study was intended to comprehensively examine the effect of the drop-structure along the Cibarani channel to improve water quality conditions, specifically the Dissolved Oxygen (DO) parameter. This study employed the one-dimensional HEC-RAS software to simulate the hydrodynamic and water quality conditions along the Cibarani channel, and the drop-structure was modelled using two alternatives consisting of a vertical wall and a steep riverbed. Subsequently, the drop-structure fitted with a vertical wall gave a more plausible reaeration rate of 125 day-1 and Root Mean Square Error (RMSE) value of 0.50. The placement of a similar configuration before the first housing of the channel increased the DO concentrations by an average of 4.37 mg/L. This was followed by the modelling of another drop-structure after the first housing to increase the DO levels at the downstream part. Eventually, the combination of the two new drop-structures succeeded in increasing the DO concentrations along the Cibarani channel to 3.3 - 6.9 mg/L.

The Low Flow Assessment of Padma River in Bangladesh Md. Abu Sayed; Aysha Akter
Journal of the Civil Engineering Forum Vol. 8 No. 1 (January 2022)
Publisher : Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada

Low flow or Environmental Flow (EF) assessment is vital to ensure the river and ecosystem remain healthy. Both natural and human interventions might alter a river. Therefore, this study presents EF requirements of the famous Hilsa breeding center in the Padma River, Bangladesh, by applying the Hydrologic Engineering Centers River Analysis System (HEC-RAS) for discharge and water surface levels simulations at different stations. The frequency analysis of 20 years of historical data, spanning 2000-2019, used the Log-Pearson Type III (LP-III) distribution method, while the one-dimensional unsteady flow simulation was performed for the last 10 years (i.e., 2012-2019). Subsequently, the HEC-RAS simulated water level values reasonably correlated with the field observations at four stations, namely Baruria Transit, Mawa, Tarpasha, Sureswar, with Coefficient of determination R2=0.86, 0.83, 0.92, and 0.74, alongside simulated minimum water surface levels of 1.57 m, 0.37 m, 0.30 m, and 0.27 m, respectively. Also, the Baruria Transit and Mawa had simulated flows that reasonably correlated with the field observations at R2=0.70 and 0.61, with a simulated minimum flow of 3849.51 m3/s and 3789.14 m3/s, respectively. The minimum flow according to the frequency analysis was 4017 m3/s, 3685 m3/s, 3449 m3/s, 3229 m3/s, and 3113 m3/s at Baruria Transit and 3304 m3/s, 2781 m3/s, 2438 m3/s, 2141 m3/s, 1992 m3/s at Mawa station in 5, 10, 20, 50 and 100 years return periods, respectively. This study overlooked to report the ongoing investigations into the water quality issues. Thus, this study is expected to guide the required EF quantity towards a healthy Hilsha fish habitat and surface water source for drinking purposes in this studied river. The stated method is also applicable to other similar rivers around the world.

Page 1 of 1 | Total Record : 10

Filter by Year

2021 2021

Filter By Issues

All Issue Vol. 12 No. 1 (January 2026) Vol. 11 No. 3 (September 2025) Vol. 11 No. 2 (May 2025) Vol. 11 No. 1 (January 2025) Vol. 10 No. 3 (September 2024) Vol. 10 No. 2 (May 2024) Vol. 10 No. 1 (January 2024) Vol. 9 No. 3 (September 2023) Vol. 9 No. 2 (May 2023) Vol. 9 No. 1 (January 2023) Vol. 8 No. 3 (September 2022) Vol. 8 No. 2 (May 2022) Vol. 8 No. 1 (January 2022) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Ali Awaludin

Contact Email
ali.awaludin@ugm.ac.id

Phone
+6287852654297

Journal Mail Official
jcef.ft@ugm.ac.id

Editorial Address
Jl. Grafika No.2 Kampus UGM, Yogyakarta 55281

Location
Kab. sleman,

Daerah istimewa yogyakarta

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Ali Awaludin

Contact Email ali.awaludin@ugm.ac.id

Phone +6287852654297

Journal Mail Official jcef.ft@ugm.ac.id

Editorial Address Jl. Grafika No.2 Kampus UGM, Yogyakarta 55281

Location Kab. sleman, Daerah istimewa yogyakarta INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Ali Awaludin

Contact Email
ali.awaludin@ugm.ac.id

Phone
+6287852654297

Journal Mail Official
jcef.ft@ugm.ac.id

Editorial Address
Jl. Grafika No.2 Kampus UGM, Yogyakarta 55281

Location
Kab. sleman,

Daerah istimewa yogyakarta

INDONESIA