Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Journal of Engineering and Management in Industrial System

jemis
Website

Published by Universitas Brawijaya

ISSN : 23383925 EISSN : 24776025 DOI : -

Core Subject : Engineering,

Industrial & Manufacturing Engineering

Journal of Engineering and Management in Industrial System is a peer reviewed journal. The journal publishes original papers at the forefront of industrial and system engineering research, covering theoretical modeling, inventory, logistics, optimizations methods, artificial intelligence, bioscience industry and their applications, etc.

Arjuna Subject : -

Articles 11 Documents

1 2

Search results for , issue "Vol 4, No 1 (2016)" : 11 Documents clear

PERBAIKAN FASILITAS PEMINDAHAN BAG PAKAN UDANG DI DEPARTEMEN PACKAGING GUNA MENGURANGI RESIKO CEDERA TULANG BELAKANG Rio Prasetyo Lukodono; Siti Kholisotul Ulfa
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Manual Materials Handling (MMH) activities still widely used in a job. This is because in this activity has a high flexibility, inexpensive, and easy to apply. However, these activities also constitute a risk when applied to the inadequate environment, less support of tool, and bad posture of work. Therefore, measurement of safety limit in doing the job by using a calculation based on the equation of NIOSH Lifting Index. The case study at PT. Central protein Prima Surabaya is the removal of shrimp feed bag that still use manual way. Acquisition of STRWL calculation results obtained for the removal of shrimp feed bag stacks 1, 2, 3, 4, 5, 6, and 7 from 5,003 Kg to 67,41 Kg. Actual load which worker must lifted in this case study on a pile of 1 to 7 is 25 kg. Load is lifted for the removal of shrimp feed bag bigger than STRWLmake it not feasible. CLI obtained in shrimp feed bag removal activity is 6.041 which value exceeds 3. Therefore CLI in this case study may create a risk of spinal cord injuries and to do their job changes. By measuring the changes in safety limits and do the work, expected reduced risk of injury to workers. After measuring the safe limit for the removal of bag obtained load is lifted workers have the risk of spinal injury, so it is given recommendations for improvement is by doing a redesign on a conveyor in the form of additional elevation (vertical) 57 cm at the end of the conveyor, as well as shortening the horizontal distance between the worker's body with a bag of shrimp feed time of transfer. With these recommendations obtained a decrease CLI becomes 1.795, which means that the risk of injury is between 1 <CLI ≤ 3 and can be reduced.

PENERAPAN PARTICIPATORY ERGONOMICS DALAM PERBAIKAN SISTEM K3 DI BAGIAN LAMINATING DAN CUTTING (STUDI KASUS DI PT PRIMARINDO ASIA INFRASTRUCTURE TBK) Paulus Sukapto; Harjoto Djojosubroto; Kadek Audiandra
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

This research concerns with the applications of participatory ergonomics (PE) for workplace improvement in the laminating and cutting department of a shoe industry, PT Primarindo Asia Infrastructure TBK. PE refers to making employees, managers, ergonomists, health and safety personnel and research experts take part in the system design progresses early and completelly to increase their autonomy and direct influence on all aspects of the work that they are going to perform. The implementation of PE consists of the following steps: (1) the analysis of workplace conditions based on International Labour Organization’s safety standard checklist (2) hazard identification using Job Safety Analysis (3) risk score determination and (4) recommendation on what to be improved. In this respect we recommend to provide personal protective equipment for the employees, safety division also to improve the workplace safety.

POTENSI DAMPAK LINGKUNGAN PADA PROSES PRODUKSI LIQUID CRISTAL DISPLAY (LCD) KOMPUTER Marudut Sirait
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Abstract. The aim of this paper is to assess and evaluate the environmental impact during the manufacturing process of Liquid Cristal Display (LCD) monitor of personal computer. Life cycle assessment (LCA) is utilized to evaluate the environmental impact during the manufacturing of LCD. The environmental load is expressed by Eco indicator 99 method. The damage categories based on Eco Indicator 99 consist of 11 categories, carcinogenic, respiratory inorganic, climate change, ionizing radiation, ozone layer depletion, Eco toxicity acidification/eutrophication, land use, extraction of mineral, and extraction of fossil fuels. Furthermore the environmental load is divided by three categories, which are human health, damage of ecosystem and depletion of resources. Simapro software version 8 is applied to calculate the environmental load each component of LCD display personal computer product. Finally, the result showed that the largest environmental load during the manufacturing process of a LCD computer display is to human health, followed by damage of ecosystem and the depletion of resources. Also, PWB component part of LCD monitor has the largest contributor for degradation environmental performance during the manufacturing process of monitor LCD, following by production of metal and plastic.

PENGEMBANGAN MODEL LOYALITAS NASABAH PADA PERBANKAN SYARIAH (BANK SYARIAH MANDIRI) Anita Ilmaniati; Iwan Inrawan Wiratmadja
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Customer loyalty is the key to customer retention, so that customer loyalty needs to be accomplished before reaching customer retention. Customer satisfaction is considered as an important factor and a positive effect on customer loyalty so far. Several previous studies have revealed that, besides customer satisfaction, there are other factors that determine customer loyalty. Until now, research on other factors that determine the customer loyalty give varies results. This research will develop a model of customer loyalty in the Islamic banking institutions, especially the Bank Syariah Mandiri (BSM) where data trends of satisfaction and customers loyalty is not proportional, by using the PLS-SEM in data processing. The aim of this study was to develop a model of customer loyalty in banking institutions, especially the Islamic banking (Bank Syariah Mandiri). The results showed that customer satisfaction is not significantly affect customer loyalty, and only the quality of services that significantly affect customer loyalty. Switching barrier and customer trust is also proven not affect customer retention both on the main effects and on the interaction effects with customer satisfaction. The result is expected to be a managerial reference to increase customer loyalty.

ANALISIS PERANCANGAN ALAT BANTU MATERIAL HANDLING PRODUKSI GENTENG MENGGUNAKAN METODE AXIOMATIC HOUSE OF QUALITY (AHOQ) Muhammad Dian Putra; Ishardita Pambudi Tama; Debrina Puspita Andriani
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

IKM genteng Talangsuko is a roof tile producers that was founded in 1980. They can produce 300-350 roof tile in each day. However, the accumulation of material happens frequently due to the limited capacity of drying space. This problem causes the production process to be obstructed, so they need an equipment that can increase the production capacity of the roof tile. Accordingly, the purpose of this research are to determine the design and spesification of the equipment and to determine whether the equipment could increase the production capacity of roof tile. This rearch proposes design of the equipment using the AHOQ method. The result of this research is the specification of the equipment that consist of three components which are rack body, wheels, and the last part is slope arranger for each level of rack. The design of material handling equipment is in the form of multilevel racks with wheels. This equipment may increase the production capacity of roof tile in IKM Genteng Talangsuko especially for the drying process to 2 times from 300-350 to ± 750 roof tiles.

EVALUATION OF PHYSIOLOGICAL RESPONSE TO STRESS USING FUZZY LOGIC Wisnu Wijayanto Putro
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

The human stress level is rather intangible, and therefore cannot be directly measured. However, this stress can be correlated to external and/or internal factors, which are rather tangible things, such as heart rate, Systolic-Diastolic Blood Pressure, salivary α-amylase, and skin temperature. These factors measurements are provided in wide ranges and vary individually lends itself naturally to fuzzy sets and fuzzy logic. This research is aimed at assessing respondents stress level through the changes of physiological factors above over time. The subjects of this study are 10 healthy adults, aged between 23-35 years old. The measurement time divided into four periods, namely pre-stressor, stressor-I, stressor-II and post stressor period. Pauli-test and mental arithmetic test was used as stressors. Obtained data were analyzed using Fuzzy Inference System (FIS) toolbox in MATLAB. By using fuzzy inference system model, the system succeeds to predict subject stress value/index based on subject physiological value. The result showed that the changes in human factors affects human stress value/index, although the subjects stated that their stress level on the same level their physiological factors were changed during measurement, and the models showed the changes of subject stress value during different period of measurement time. Keywords:

ANALISIS PERBAIKAN WORK STATION PADA PROSES PRODUKSI GARMENT DENGAN MENGGUNAKAN PENDEKATAN ANTHROPOMETRI Mentari Rasyid; Surachman Surachman; Sugiono Sugiono
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

ABSTRACT Productivity garment greatly influenced by the work station facilities and presence in the workplace . UD Aliya - Malang is one example as an object of research . Based on the research conducted , there are still some problems . This is also supported by the operator of complaints about the draft working facilities , the work table is often used as a medium to carry out the activity of cutting material (cloth or canvas). Incompatibility between the dimension table with the body dimensions of operators resulted in operators often complain , and perform movements beyond the normal limits . By using anthropometric approach , the results obtained is the size of the table corresponding to the dimensions of the body of the operator , namely the size of the table is 117cm x 69cm x 98,41cm . Keywords: Work Station, Facilities of Work, Anthropometry

INVENTORY CONTROL OF CRITICAL SPARE PART BASED ON FNS ANALYSIS Niken Trisnawati; Oyong Novareza; Agustina Eunike
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Krebet Baru I Sugar Factory is a producer of sugar that operate on the milling season that start from June until November 2015. The problem that occured in the Krebet Baru I were ineffectively and inefficiently spare parts inventory policy that cause stockout and led to production process stoppage. This research used FNS analysis for the classification spare parts and EOQ Probabilistic method for calculation of stockout probability, optimum Q and ROP, total cost, also service level which were would be compared with existing policy. The research resulted that 44 types of spare parts categorized as urgent, 8 types else categorized as critical. EOQ Probabilistic method was chosen as the best method of control policy, with total cost reduction by 12%-93% and service level increase by 995-100% than existing policy which resulted a total cost by Rp 5.004.890 – Rp 142.647.057 and service level by 0%-30%.

INVESTMENT ANALYSIS OF ADDITIONAL WAREHOUSE AT CEMENT DISTRIBUTE WITH A METHOD OF ANALYTIC HIERARCHY PROCESS Fidyah Mawarda; Rahmi Yuniarti; Wifqi Azlia
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Cement Industry for distribute product to consumer has many distributors for each district. One of them an Pasuruan. Pasuruan Distributor has problem that cement’s demands are increasing significantly but sales are decreasing. This phenomenon happened because of the limited capacity of warehouse about 352 m2. Therefore, they planning to additional warehouse capacity with three options (1) Build new warehouse, or renting warehouse from location (2) A or location (3) B. Distributor should conduct a feasibiility study in order to determine the best option. In this research, Analytic Hierarchy Proces) is used to know the interest rate of each criteria. The criteria are location, wide of location and cost. The results shows that AHP value for building warehouse is 0,327. In the other hand, AHP Value for renting warehouse A and B are 0,448 and 0,225. Based on this comparison, rent A will be the best option as it has the highest AHP.

KAJIAN KEBERLANJUTAN PENGELOLAAN EKOWISATA BERBASIS DAERAH PERLINDUNGAN LAUT (DPL) DI PSISIR DESA BAHOI, MINAHASA UTARA, SULAWESI UTARA Andronicus Andronicus; Fredinan Yulianda; Achmad Fahrudin
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

This study aimed to assess sustainability status of coastal ecotourism management of Bahoi village , North Minahasa , North Sulawesi -based marine protected area ( MPA). The result of this study reveals that Rapfish method, may be used as a method on appraising sustainability status of coastal resource management. Rapid Appraisal of Coastal Ecotourism analysis show that sustainability index of Bahoi village is 52,47. Thus sustainability status of coastal ecotourism management of Bahoi village is sustainable. Monte Carlo analysis method shows that indices from Rapid Appraisal of Coastal Ecotourism analysis are stable.

Page 1 of 2 | Total Record : 11

1 2

Filter by Year

2016 2016

Filter By Issues

All Issue Vol. 13 No. 2 (2025): In Process Vol. 13 No. 1 (2025) Vol. 12 No. 2 (2024) Vol 12, No 2 (2024): (in process) Vol 12, No 1 (2024) Vol. 12 No. 1 (2024) Vol 11, No 2 (2023) Vol. 11 No. 2 (2023) Vol. 11 No. 1 (2023) Vol 11, No 1 (2023) Vol 10, No 2 (2022) Vol 10, No 1 (2022) Vol 9, No 2 (2021) Vol 9, No 1 (2021) Vol. 9 No. 1 (2021) Vol 8, No 2 (2020) Vol 8, No 1 (2020) Vol 7, No 2 (2019) Vol 7, No 1 (2019) Vol 6, No 2 (2018) Vol 6, No 1 (2018) Vol 5, No 2 (2017) Vol 5, No 1 (2017) Vol 4, No 2 (2016) Vol 4, No 1 (2016) Vol 3, No 2 (2015) Vol 3, No 1 (2015) Vol 2, No 2 (2014) Vol 2, No 2 (2014) Vol 2, No 1 (2014) Vol 1, No 1 (2013) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota malang,

Jawa timur

INDONESIA