Garuda - Garba Rujukan Digital

THE EFFECTIVENESS MODEL OF KNOWLEDGE SHARING IN BUSINESS INNOVATION TO IMPROVE THE PERFORMANCE OF MICRO SMALL AND MEDIUM ENTERPRISES Putro, Bramantiyo Eko; Ilmaniati, Anita
Jurnal Ilmiah Teknik Industri Vol. 19, No. 1, June 2020
Publisher : Muhammadiyah University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23917/jiti.v19i1.10231

Innovation performance can be an important indicator for organizations because it can enhance competitive advantage. In the organizational context, the results of innovation can be drawn by increasing efficiency, productivity, quality, competitive advantage, and market development. Micro, small, and medium entreprises (MSMEs) generally have to face challenges such as limited financial resources, sub-optimal operations, inefficient supply chains, limitations in technology application, and unpreparedness in facing competition and market changes. To be able to face this challenge, MSMEs need to take an innovative approach in business operationsThis study aims to improve understanding of the effectiveness of knowledge sharing in organizations. An understanding of knowedge sharing activities through the business innovation process is expected to be able to produce a mechanism to improve MSME performance. Research data were obtained by distributing questionnaires directly and online to SMEs Data processing is done by testing the conceptual model using PLS-SEM. The conceptual model was tested with 137 samples obtained directly and online from MSME actors. From the test results, it can be seen the factors that encourage knowledge sharing activities so that they can influence business innovation and encourage the performance of MSMEs namely trust, organizational culture, organizational structure, employee attitudes, and motivational methods.

PENGEMBANGAN MODEL LOYALITAS NASABAH PADA PERBANKAN SYARIAH (BANK SYARIAH MANDIRI) Anita Ilmaniati; Iwan Inrawan Wiratmadja
Journal of Engineering and Management in Industrial System Vol 4, No 1 (2016)
Publisher : Badan Penerbit Jurnal, Faculty of Engineering, Universitas Brawijaya

Customer loyalty is the key to customer retention, so that customer loyalty needs to be accomplished before reaching customer retention. Customer satisfaction is considered as an important factor and a positive effect on customer loyalty so far. Several previous studies have revealed that, besides customer satisfaction, there are other factors that determine customer loyalty. Until now, research on other factors that determine the customer loyalty give varies results. This research will develop a model of customer loyalty in the Islamic banking institutions, especially the Bank Syariah Mandiri (BSM) where data trends of satisfaction and customers loyalty is not proportional, by using the PLS-SEM in data processing. The aim of this study was to develop a model of customer loyalty in banking institutions, especially the Islamic banking (Bank Syariah Mandiri). The results showed that customer satisfaction is not significantly affect customer loyalty, and only the quality of services that significantly affect customer loyalty. Switching barrier and customer trust is also proven not affect customer retention both on the main effects and on the interaction effects with customer satisfaction. The result is expected to be a managerial reference to increase customer loyalty.

MODEL OPTIMASI PENGGANTIAN MESIN PEMECAH KULIT BERAS MENGGUNAKAN PEMROGRAMAN DINAMIS Abdul Gopar; Anita Ilmaniati
Journal Industrial Servicess Vol 3, No 1b (2017): Oktober 2017
Publisher : Fakultas Teknik Jurusan Teknik Industri Universitas Sultan Ageng Tirtayasa

Proses penggilingan padi berupa proses pemecahan dan pelepasan kulit padi akan menentukan kualitas beras pecah kulit (BPK) yang dihasilkan. BPK yang dihasilkan kualitasnya akan semakin menurun, jika efisiensi mesin pemecah kulit padi sudah menurun akibat waktu. Ini berarti bahwa semakin lama mesin dipertahankan, maka biaya operasi yang di keluarkan akan semakin tinggi. Penggantian mesin pada waktu yang tepat akan mengurangi jumlah cacat dan ongkos perawatan. Penelitian ini bertujuan untuk menentukan kebijakan yang tepat dalam melakukan penggantian mesin dan mengetahui pendapatan bersih maksimal yang dapat diperoleh terkait dengan kebijakan tersebut. Penelitian ini dilakukan dengan pendekatan pemograman dinamis. Berdasarkan hasil penelitian, keputusan optimal penggatian mesin adalah untuk tahun pertama keputusan (dengan umur mesin sudah 3 tahun) mesin tetap dipertahankan kemudian untuk tahun ke dua keputusan mesin diganti dan untuk tahun ke tiga keputusan mesin dipertahankan sampai awal tahun ke lima, sehingga umur efektif mesin menjadi 3 tahun. Hasil pendapatan bersih maksimal yang dapat diperoleh PB. Do’a Sepuh dengan kebijakan penggantian mesin adalah Rp.41.029.395 untuk periode 5 tahun keputusan

The Effectiveness Model of Knowledge Sharing in Business Innovation to Improve the Performance of Micro Small and Medium Enterprises Bramantiyo Eko Putro; Anita Ilmaniati
Jurnal Ilmiah Teknik Industri Vol. 19, No. 1, June 2020
Publisher : Department of Industrial Engineering Universitas Muhammadiyah Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23917/jiti.v19i1.10231

Innovation performance can be an important indicator for organizations because it can enhance competitive advantage. In the organizational context, the results of innovation can be drawn by increasing efficiency, productivity, quality, competitive advantage, and market development. Micro, small, and medium entreprises (MSMEs) generally have to face challenges such as limited financial resources, sub-optimal operations, inefficient supply chains, limitations in technology application, and unpreparedness in facing competition and market changes. To be able to face this challenge, MSMEs need to take an innovative approach in business operationsThis study aims to improve understanding of the effectiveness of knowledge sharing in organizations. An understanding of knowedge sharing activities through the business innovation process is expected to be able to produce a mechanism to improve MSME performance. Research data were obtained by distributing questionnaires directly and online to SMEs Data processing is done by testing the conceptual model using PLS-SEM. The conceptual model was tested with 137 samples obtained directly and online from MSME actors. From the test results, it can be seen the factors that encourage knowledge sharing activities so that they can influence business innovation and encourage the performance of MSMEs namely trust, organizational culture, organizational structure, employee attitudes, and motivational methods.

ANALISIS KOMPONEN UTAMA FAKTOR-FAKTOR PENDAHULU (ANTECENDENTS) BERBAGI PENGETAHUAN PADA USAHA MIKRO, KECIL, DAN MENENGAH (UMKM) DI INDONESIA Anita Ilmaniati; Bramantiyo Eko Putro
Jurnal Teknologi Vol 11, No 1 (2019): Jurnal Teknologi
Publisher : Fakultas Teknik Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jurtek.11.1.67-78

meningkatkan penguasaan pengetahuan melalui berbagi pengetahuan. Berbagi pengetahuan menjadi suatu faktor penting dalam penerapan manajemen pengetahuan pada usaha mikro, kecil, dan menengah (UMKM) agar dapat meningkatkan kinerjanya sehingga dapat meningkatkan daya saing dalam era global. Penelitian sebelumnya mengenai model berbagi pengetahuan pada UMKM Indonesia, mengusulkan model konseptual faktor-faktor pendahulu berbagi pengetahuan yang terdiri dari lima dimensi (kepercayaan, budaya organisasi, struktur organisasi, sikap karyawan, dan motivasi) yang diukur oleh 19 item. Penelitian ini bertujuan untuk menyederhanakan dimensi faktor pendahulu berbagi pengetahuan karena adanya item antar dimensi yang sebenarnya saling berkorelasi sangat dimungkinkan. Metode penelitian yang dilakukan adalah dengan menggunakan analisis komponen utama (principal component analysis) terhadap 19 item pengukur faktor-faktor pendahulu berbagi pengetahuan, menggunakan sampel sebanyak 55 responden dengan unit analisis UMKM di wilayah Jawa Barat. Hasil penelitian ini menunjukan bahwa 19 item pengukur dapat dikelompokan kembali ke dalam tiga komponen (dimensi) yaitu suasana bekerja, intensi positif karyawan dan pola pikir karyawan.

PERANCANGAN VENDOR MANAGEMENT INVENTORY PADA USAHA KAYU Mohammad Egi Rohmatulloh; Anita Ilmaniati
Jurnal Media Teknik dan Sistem Industri Vol 3, No 1 (2019)
Publisher : Universitas Suryakancana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35194/jmtsi.v3i1.560

Abstract— Distortion of supply chain information in the industry can cause a mismatch between supply and demand, thus causing the bullwhip effect. One method that can be applied to overcome information distortion as the cause of the bullwhip effect is vendor managing inventory (VMI), where the needs of distributors and retail are controlled and monitored by the supplier. This study aims to measure the bullwhip effect on the supply chain at suppliers and producers, and propose VMI designs on supply chains at suppliers and producers. The research was carried out by calculating the value of the demand for the retail, producer and supplier, while the repairs were carried out by forecasting demand by then performing a VMI simulation for recalculating the bullwhip effect. The results showed that the value of the bullwhip effect on suppliers (Mahoni Lestari PD), producers (PD Kurbiti), and retailers (PD Nur Sofi) changed from 1,246, 1,073 and 1,118 (all above the bullwhip effect parameter 1,040) to 1.Key words— Bullwhip effect; Vendor Manage Inventory (VMI); supply chain Abstrak— Distorsi informasi rantai pasok pada industri dapat menyebabkan ketidak sesuaian antara pasokan dan permintaan, sehingga menyebabkan bullwhip effect. Salah satu metode yang dapat diterapkan untuk mengatasi distorsi informasi sebagai penyebab bullwhip effect adalah vendor manage inventory (VMI), dimana kebutuhan distributor dan ritel dikontrol dan dimonitori oleh pihak supplier. Penelitian ini bertujuan untuk mengukur bullwhip effect pada rantai pasok di supplier dan produsen, serta Mengusulkan rancangan VMI pada rantai pasok di supplier dan produsen. Penelitian dilakukan dengan menghitung nilai amplikasi permintaan pada ritel, produsen dan supplier, sedangkan untuk perbaikan dilakukan dengan peramalan permintaan dengan kemudian melakukan simulasi VMI untuk perhitungan kembali bullwhip effect. Hasil penelitian menunjukan bahwa nilai bullwhip effect pada pemasok (PD Mahoni Lestari), produsen (PD Kurbiti), dan retailer (PD Nur Sofi) berubah dari 1,246, 1.073 dan 1,118 (semua diatas bullwhip effect parameter 1,040) menjadi 1.Kata kunci— Bullwhip effect; Vendor Manage Inventory (VMI); rantai pasok

Sistem Informasi Pengelolaan Tugas Akhir Menggunakan Metode User-Centered Design Finsa Nurpandi; Anita Ilmaniati
JATISI (Jurnal Teknik Informatika dan Sistem Informasi) Vol 10 No 4 (2023): JATISI (Jurnal Teknik Informatika dan Sistem Informasi)
Publisher : Lembaga Penelitian dan Pengabdian pada Masyarakat (LPPM) STMIK Global Informatika MDP

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35957/jatisi.v10i4.3322

This research aims to develop a thesis management information system at the Faculty of Engineering, Suryakancana University. Based on the results of the analysis, the system built to solve problems regarding data management that is not centralized, there are still processes that are not optimal, and document search is still difficult. Processes that are managed in this system include data management for student thesis, scheduling, registration, and assessment. The research was conducted based on the Design Science Research Methodology information system guide which has stages of problem identification, setting goals, design and development, demonstration, evaluation, and communication. The system was developed using the Laravel framework that applies the Model View Controller (MVC) concept and uses the PHP programming language, and uses the MySQL database. System development uses a User-Centered Design approach, where development only focuses on the user so that it does not change the work flow, and work procedures that apply at the Faculty of Engineering, Suryakancana University.

Usulan Perbaikan Tata Letak Fasilitas Terhadap Optimalisasi Jarak dan Ongkos Material Handling Dengan Pendekatan Systematic layout planning (SLP) di PT Transplant Indonesia Muslim, Dede; Ilmaniati, Anita
Jurnal Media Teknik dan Sistem Industri Vol 2, No 1 (2018)
Publisher : Universitas Suryakancana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35194/jmtsi.v2i1.327

Abstract â€“ Unplanned layout and inefficient material flow between work units can lead to increased cost. PT Transplan Indonesia's current material flow path is inefficient with material flow distance 115.5 meters and material handling cost that has not been taken into account. This study aims to find out how big the role of facility layout design in cutting the distance of material transfer and pressing the cost of material handling. The method used in this research is Systematic Layout Planning (SLP) approach, which is comparing the distance of material transfer between initial layout with proposed layout. The results of this study indicate that the distance of the material flow path on the production floor with proposed layout changed to 71,7 meters, with material handling cost per meter reduced from Rp. 1,105,954 to Rp. 712,402 or decrease as much as 35%. Based on the results of the research, the layout of the proposal is considered more effective and efficient because it can reduce the distance of material transfer and reduce the cost of material handling on the packing/shipping floor.Keywords: Layout Design; Material handling cost; Systematic Layout Planning (SLP)

Pengaruh Efikasi Diri dan Ekspektasi Pendapatan, Terhadap Minat Berwirausaha Siswa SMK (SMK Al-Madina) Ilmaniati, Anita; Musihudin, Muslihudin
Jurnal Media Teknik dan Sistem Industri Vol 1 (2017)
Publisher : Universitas Suryakancana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35194/jmtsi.v1i0.59

Cianjur regency is an area that has the potential to develop the regional economy through creative industries-based entrepreneurship. Cianjur is supported by many vocational schools (SMK) with relevant expertise fields to develop regional potential through entrepreneurship. Based on this, it is very important to develop entrepreneurship interest in SMK students in Cianjur by identifying factors that influence student entrepreneur interest. Factors of entrepreneur interest identified in this research are self efficacy and income expectation. The purpose of this research is to analyze the effect of self efficacy and income expectation on student entrepreneurship interest of SMK (Al-Madina, Cianjur). This research was conducted by distributing questionnaires to students of SMK Al-Madina Cianjur and using PLS-SEM model in testing. The results showed that the relationship of self efficacy variable to entrepreneurship interest was significant with T-statistics of 2,996 (> 1,96), and the relationship of income expectation variable to entrepreneur interest was significant with T-statistic 4,121 (> 1,96). R-Square value of this research model is 0.228 which shows that there are still other variables that will explain student entrepreneur interest in Cianjur.Keywords: Self efficacy; income expectations; entrepreneurial interest; PLS-SEMÂ Â

Optimasi Persediaan Pupuk Non-Subsidi Menggunakan Programa Dinamis Model Inventory (UD. Barokah) Reynaldi Teja Kusumah; Anita Ilmaniati
Jurnal Media Teknik dan Sistem Industri Vol 3, No 2 (2019)
Publisher : Universitas Suryakancana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35194/jmtsi.v3i2.767

PupukÂ merupakanÂ salahÂ satuÂ komponen yang berperan penting dalam peningkatan produksi dan produktivitas pertanian. Penyaluran pupuk yang efektif dan efisien menjadi kunci utama dalam optimasi penjualan. Sering kali timbul permasalahan dalam penyaluran pupuk yaitu persediaan yang tidak sesuai dengan jumlah permintaan. UD Barokah merupakan salah satu pengecer resmi pupuk bersubsidi maupun non-subsidi di Kabupaten Cianjur yang sering mengalami permasalahan penumpukan stok pupuk non-subsidi. Rata-rata penumpukan pada UD Barokah mencapai 4213 kg pupuk non-subsidi per-bulan dalam tahun 2017. Penumpukan tersebut menjadi beban biaya tambahan bagi UD Barokah. Penelitian ini bertujuan untuk menentukan jumlah persediaan pupuk non-subsidi yang optimal dan biaya optimal untuk persediaan pupuk non-subsidi. Metode yang digunakan dalam penelitian ini adalah metode peramalan permintaan dengan regresi linier dan programa dinamis untuk menentukan persediaan. Berdasarkan hasil penelitian, didapatkan bahwa pengaturan persediaan pupuk non-subsidi pada tahun 2018-2019 di UD. Barokah berikisar antara 18.000 kg -26.000 per bulan dengan total biaya adalah Rp.7.741.134.625.Kata Kunci: Optimasi, programa dinamis, peramalan permintaan

Title

Found 13 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 13 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 13 Documents
Search