<![CDATA[High-level liquid radioactive waste in Indonesia is presently generated from the Mo99 radioisotope production process. Until present, the treatment of the waste has not been carried out and it is still stored in the hot cell awaiting for the establishment of the methods, technology and processing facilities. Several countries have implemented a vitrification process to process LRCAT. Several types of glass have been developed for LRCAT vitrification, namely alumina silicate glass, phosphate glass, borosilicate glass and ceramic glass. Borosilicate glass is the most ideal type of glass to use. This is because the process of making borosilicate glass is simpler and the results of vitrification of borosilicate waste-glass have chemical resistance and physical resistance as well as high waste content. The objective of this research is to determine the composition of borosilicate glass-forming materials through a vitrification process suitable for imobilation of high-level waste from 99Mo production that meets the requirements of the final waste form. Several requirements in choosing a matrix for LRCAT vitrification are: easy and practical manufacturing process, high waste content, high chemical resistance, high radiation stability, high heat stability, good physical integrity and long-term stability. The vitrification process uses borosilicate glass forming materials with two different compositions. The vitrification process was carried out at a temperature of 1150 ºC for 2.5 hours then cooled to room temperature. Glass characterization is carried out by leaching test and X-ray diffractometer (XRD). Waste glass with GF-1 glass forming material with various waste contents cannot be melted at a temperature of 1150 ºC. The vitrification process was unsuccessful and no melting of the waste-glass occurred. The glass forming material GF-1 cannot be used for LRCAT vitrification and no further research was carried out. This is related to its use on an industrial scale, if the melting temperature is higher than 1150 ºC, then the refractory corrosion rate is very high so the melter life is shorter. This will generate more solid radioactive waste (secondary waste). In addition, high melting temperature will produce more gas so that gas handling is more complex. Meanwhile, glass material with GF-2 glass forming material can be melted at a temperature of 1150 ºC. GF-1 waste-glass were not leached test because the vitrification process was unsuccessful and no melting of the waste-glass occurred. The leaching test results of all GF-2 glass-waste compositions that were made ranged from 0.79 x 10-4 gram.cm-2.day-1 to 2.25 x 10-4 gram.cm-2.day-1. The leach rate requirement for PNC Japan standard borosilicate glass is 2.30 x 10-5 gram.cm-2.day-1 and based on Pacific Northwest National Laboratory (PNNL) is 10-4 – 10-7 gram.cm-2.day-1. Based on the results of chemical resistance characterization (leachate test) and physical integrity, the composition of GF-2 glass-waste with a waste content of 20% by weight provides the most optimal characteristics]]>
