Claim Missing Document
Check
Articles

Found 8 Documents
Search

PROSES PEMBUATAN PART BRACKET SELECT LEVER MENGGUNAKAN MESIN STAMPING DI PT.TRIJAYA TEKNIK KARAWANG Fazri Muzakir; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This internship was conducted at PT. Trijaya Teknik Karawang with the objective of understanding the manufacturing process of the Bracket Select Lever using a Yushida P2 stamping press with a capacity of 110 tons. The internship methodology followed a flowchart consisting of observation, problem identification, literature review, planning, stamping process, and inspection stages. The Bracket Select Lever was manufactured using SPHC-PO steel with a thickness of 4.5 mm through the blanking, bending 1–2, and piercing processes, employing dies specifically designed for each manufacturing stage. The results of the internship indicate that the manufacturing process of the Bracket Select Lever was carried out in accordance with the established procedures. The accuracy of die setup, machine operation, and inspection process played a significant role in ensuring the quality of the final product.
PERAWATAN SOOTBLOWER INSERTABLE ROTATING (IR) PADA BOILER UNIT 3 PT PLN NUSANTARA POWER UP PLTU INDRAMAYU Aditiya Nathan Hidayat; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This study discusses the maintenance of an Insertable Rotating (IR-3Z) sootblower on Boiler Unit 3 at PT PLN Nusantara Power UP PLTU Indramayu. Ash and soot deposits on boiler heat-transfer surfaces can create slagging and fouling, reduce heat absorption, and disturb boiler performance. The study aimed to describe the IR-3Z maintenance sequence, identify the main problems found during field practice, and determine the actions required to restore equipment performance. Data were obtained through field observation, interviews with company personnel, literature review, technical data collection, and direct participation in maintenance activities. The results show that routine maintenance includes mechanical inspection, drive-system evaluation, cleaning, lubrication, component replacement, and post-maintenance testing. The main actions observed were replacement of the guide-bar retaining screw, grease filling on the main drive gear, replacement of gland packing, and replacement of the gooseneck. Based on the technical parameters, the lance travels 267 mm at 290 mm/min, requiring approximately 0.92 min for one movement, while the 2.3 rpm rotation speed produces about two rotations during the operating stroke. The work-practice findings report that 75% of the identified problems were related to component wear and 25% to drive-mechanism disturbances. Scheduled maintenance and compliance with safety procedures are required to maintain sootblower reliability and boiler heat-transfer performance.
PEMELIHARAAN SOOTBLOWER AIR PREHEATER (APH) PADA BOILER DI PT PLN NUSANTARA POWER UP PLTU INDRAMAYU Muhamad Erik Setyawan; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The Air Preheater (APH) sootblower is an important component in the boiler system of a Steam Power Plant (PLTU) that functions to remove ash deposits resulting from the combustion process on the APH heating elements. The accumulation of ash deposits (fouling) can reduce heat transfer effectiveness, increase flue gas pressure drop, and negatively affect the thermal efficiency of the boiler. Therefore, planned and proper maintenance of the APH sootblower is required to ensure optimal boiler performance. This Internship Report aims to examine the maintenance procedures of the Air Preheater (APH) sootblower in the boiler system at PT PLN Nusantara Power UP PLTU Indramayu and to identify common problems encountered during its operation. The methods applied include field observation, literature review, technical data collection, and direct involvement in maintenance activities, particularly corrective maintenance, gland packing replacement, and roller front support bracket replacement in accordance with the applicable Standard Operating Procedures (SOP) and Work Instructions (WI). The results of the observations indicate that proper maintenance of the APH sootblower is able to maintain the effectiveness of APH surface cleaning, reduce potential operational disturbances, and support improvements in the reliability and efficiency of the boiler system. Thus, the implementation of proper APH sootblower maintenance is an important factor in supporting operational continuity and the performance of the steam power plant at PLTU Indramayu.
ANALISIS GAYA TEKAN DAN PROCESS PLANNING PADA PROSES STAMPING BODY OIL FILTER SPIN-ON KBO011-0106B MENGGUNAKAN PENDEKATAN PERHITUNGAN MANUFAKTUR Aji Supriadi; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The structural integrity of oil filter components is an absolute prerequisite in ensuring the durability of internal combustion engines in the automotive sector. As a component that functions as a Pressure vessel, the oil filter Body must be manufactured with high precision to avoid mechanical failure. This study aims to analyze the process planning and validate the Manufacturing Pressure requirements of the KBO011-0106B spin-on oil filter Body component. The research methodology integrates literature studies, production parameter observations at PT FSCM Manufacturing Indonesia, and modeling using ZWCAD software. The analysis was carried out on 0.6 mm SECD cold-rolled steel through mechanical force calculations at the Blanking, Deep drawing (two stages), and Trimming stages. The results show a total Pressure requirement of approximately 40 tons, which is technically very capable to be run on a hydraulic Press machine with a capacity of 200-310 tons. The analysis concludes that the applied Manufacturing flow has a very high safety factor, optimal operational efficiency, and meets OEM quality standards. This article provides a technical contribution in the framework of stamping parameter optimization for high-Pressure components in the automotive industry.
PEMELIHARAAN KONDENSOR UNIT 1 DI PT PLN NUSANTARA POWER UP INDRAMAYU Rama Prasetya Dienata; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This article discusses the maintenance system for the Unit 1 condenser at PT PLN Nusantara Power UP Indramayu. The condenser is a crucial component in the steam power plant cycle, functioning to condense exhaust steam from the turbine into condensate water to maintain the plant's thermal efficiency. The primary focus of this report is to understand maintenance procedures and evaluate condenser performance efficiency based on operational field data. The methodology employed includes field observations, a literature review, and mass and heat balance calculations. Observations indicate that maintenance procedures are carried out in several stages, ranging from work document preparation and tube cleaning via the scrubbing method to leak detection. Based on the calculations, the actual condenser efficiency was recorded at 65.13%. This figure falls below the design efficiency standard of 80–100%, indicating a need for further maintenance on the heat transfer and vacuum systems to re-optimize the power generation unit's performance.
ANALISIS DAN PREDIKSI TINGKAT KONSUMSI MINUMAN MENGGUNAKAN REGRESI LINEAR DI KABUPATEN MAJALENGKA Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Beverage consumption data can provide useful information for understanding changes in community demand and supporting regional planning. This study applies a simple linear regression model to analyze and predict the level of beverage consumption in Majalengka Regency using secondary data obtained from the West Java Open Data portal. The dataset contains annual beverage consumption data measured in kilograms per capita per year and is produced by the Food Security and Livestock Service of West Java Province. The research stages consist of data collection, data consistency checking, trend analysis, regression model development, temporal validation, and model performance evaluation. Simple linear regression was selected because it is computationally efficient, easy to interpret, and suitable for analyzing long-term trends in relatively limited annual datasets. Model performance is evaluated using the coefficient of determination (R²), Mean Absolute Percentage Error (MAPE), Mean Absolute Error (MAE), and Root Mean Square Error (RMSE). The resulting regression model is used to estimate the level of beverage consumption for the following period. This study is expected to provide a simple and reproducible quantitative approach for identifying beverage consumption trends and supporting data-based planning in Majalengka Regency.
ANALISIS PROSES MANUFACTUR DAN INSPEKSI KUALITAS PART COVER MANHOLE KAPAL TUNDA MENGGUNAKAN MESIN CNC LASER CUTTING BODOR F3015 Muhamad Haeckal Fadillah; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The manhole cover on a tugboat is a vital component that ensures the tightness of the vessel's tanks while providing access for maintenance personnel. This study aims to analyze the manufacturing process and evaluate the quality inspection outcomes of tugboat manhole cover parts fabricated using a Bodor F3015 CNC Laser Cutting machine. The methodology encompasses an analysis of the production workflow including CAD/CAM design, material selection (ASTM A131 steel plate), and machine parameter setup as well as a quality inspection analysis based on dimensional and visual controls. The evaluation results indicate that the CNC laser cutting process significantly increases production efficiency compared to conventional methods. Furthermore, quality inspection confirms that the fabricated manhole covers conform to engineering drawing specifications, achieving a hole-to-edge distance of and an inter-hole distance of , thereby meeting all quality assurance criteria (PASSED/OK).
PROSES PEMBUATAN WORM GEAR SHAFT MENGGUNAKAN MESIN BUBUT KONVENSIONAL Derizki Abi Setiawan; Engkos Koswara
SEMINAR TEKNOLOGI MAJALENGKA (STIMA) Vol 10 (2026)
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The manufacturing of a worm gear shaft is an important process in the manufacturing field, particularly in power transmission systems that require a high reduction ratio and the ability to withstand large loads. The worm gear shaft functions as a threaded shaft that works together with the worm wheel to produce smooth and stable rotation. This study aims to determine the process of manufacturing a worm gear shaft using a conventional lathe and to identify the stages of work, from material preparation to the finishing process. The methods used include material preparation, workpiece measurement, straight turning, stepped turning, worm-thread cutting, keyway milling, finishing, and inspection of the results. The material used is Stainless Steel 304, machined using a conventional lathe and a milling machine. The work stages were carried out systematically to obtain the dimensions and worm-thread profile according to the design. The results show that a conventional lathe can be used to produce a worm gear shaft with satisfactory results when the machining is carried out according to the correct procedure and cutting parameters, with a total machining time of 9.442 minutes (567 seconds). The accuracy of measurement, tool selection, and spindle-speed setting greatly affect the quality of the resulting worm thread.