Claim Missing Document
Check
Articles

Found 1 Documents
Search

Analisa Kualitas Rekondisi Pipa Collapse Astm A106 Grade B Dengan Proses Heat Treatment Normalizing Dan Quenching Pada Uji Tarik Ridha Siddiq; Abdul Hamid; Ilham Maulana
Venus: Jurnal Publikasi Rumpun Ilmu Teknik  Vol. 4 No. 5 (2026): Oktober: Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Publisher : Asosiasi Riset Ilmu Teknik Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61132/venus.v4i5.1774

Abstract

ASTM A106 Grade B pipes that have collapsed under external pressure must be reconditioned before their fitness for further use can be reassessed. This study analyzes how normalizing and quenching heat treatments affect the mechanical properties of collapsed pipes, using tensile testing. The deformed pipes were first reconditioned and then heated to 850°C with a holding time of 1 hour. After heating, the normalized specimens were cooled slowly in open air, while the quenched specimens were cooled rapidly in water. Nine specimens were tested and divided into three groups: non-heat-treated specimens as the control, normalized specimens, and quenched specimens. The tensile test measured yield stress, ultimate tensile stress (UTS), and elongation. The non-heat-treated specimens had a yield stress of 387 MPa, a UTS of 483 MPa, and an elongation of 20%. Normalizing lowered the yield stress to 275 MPa and the UTS to 452 MPa, but raised the elongation considerably, to 37%. Quenching produced the highest strength of the three groups, with a yield stress of 545 MPa and a UTS of 889 MPa. This gain in strength came with a drop in elongation to 13%, which is lower than that of the untreated specimens. The comparison shows a trade-off between strength and ductility in the two heat treatment methods. Normalizing proved to be the most effective and safest reconditioning method, because it restored the ductility of the material to meet the minimum ASTM A106 Grade B requirement of 23% elongation. The elongation values of the non-heat-treated specimens (20%) and the quenched specimens (13%) remained below this limit.