Claim Missing Document
Check
Articles

Found 5 Documents
Search

AKTUALISASI KAPASITAS DAYA DUKUNG AKSIAL PONDASI TIANG PANCANG BERDASARKAN PARAMETER TANAH DAN STATIC LOADING TEST KASUS: PERENCANAAN GEDUNG DEWI SARTIKA DI UNJ Mulyono, Tri; Musalamah, Sittati; Hanifah, Nurul
Jurnal Kajian Teknik Sipil Vol 3, No 1 (2018): Jurnal Kajian Teknik Sipil
Publisher : Universitas 17 Agustus 1945 Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (975.126 KB) | DOI: 10.52447/jkts.v3i1.1151

Abstract

Pengaruh besarnya hasil hitungan nilai kohesi terhadap aktualisasi hasil perencanaan pondasi menggunakan beberapa metode perencanaan pondasi yang berbeda merupakan hasil penelitian yang dilakukan pada kapasitas daya dukung aksial pondasi tiang pancang untuk kasus perencanaan gedung Dewi Sartika di Universitas Negeri Jakarta. Tujuan utamanya untuk membandingkan hasil hitungan perencana yang menggunakan metode Meyerhof N-SPT, dengan membandingkan hasil hitungan kapasitas daya dukung tiang yang memperhitungkan nilai kohesi—yaitu metode Meyerhof (Clay) dan Vesic (Clay) untuk daya dukung ujung, serta metode α (Terzaghi, Peck dan Mesri serta Tomlinson) dan λ untuk daya dukung kulit. Sedangkan untuk menentukan aktualisasi dari beberapa metode perencanaan tersebut, digunakan hasil interpretasi static loading test. Hasil penelitian ini menunjukkan bahwa metode Meyerhof N-SPT merupakan metode yang lebih aktual untuk digunakan dalam perencanaan pondasi, karena nilai daya dukungnya paling mendekati hasil static loading test. Akan tetapi, hasil penurunan pondasi berdasarkan metode tersebut melebihi batas aman penurunan pondasi yang diijinkan. Sedangkan perencanaan menggunakan metode yang memperhitungkan nilai kohesi, hasil penurunan pondasinya masih memenuhi batas yang diijinkan.
ANALISA KEBUTUHAN PENGEMBANGAN MEDIA PEMBELAJARAN PADA MATA KULIAH MEKANIKA BAHAN DI UNIVERSITAS NEGERI JAKARTA Arthur, Riyan; Luthfiana, Yusrina; Musalamah, Sittati
Educational Building: Jurnal Pendidikan Teknik Bangunan dan Sipil Vol. 5 No. 2 DES (2019): EDUCATIONAL BUILDING
Publisher : Jurusan Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24114/ebjptbs.v5i2 DES.16084

Abstract

Penelitian ini bertujuan untuk menganalisa kebutuhan peserta didik terhadap pengembangan media pembelajaran pada mata kuliah Mekanika Bahan di Program Studi Pendidikan Teknik Bangunan, Universitas Negeri Jakarta. Analisa kebutuhan dilakukan berdasarkan tahapan pertama dari model Lee and Owens yaitu penilaian/analisis. Hasil dari penelitian ini adalah analisa kebutuhan yang tujuan utamanya untuk mengidentifikasi kesenjangan antara kondisi aktual dan kondisi yang seharusnya. Pengumpulan data pada penelitian ini menggunakan kuesioner dengan jenis data kualitatif. Kuesioner tersebut disebar menggunakan google form sehingga responden dapat mengisi kuesioner tersebut secara online. Periode pengisian kuesioner adalah tanggal 16 “ 17 Mei 2019. Berdasarkan hasil analisa kebutuhan yang telah dilakukan, terdapat beberapa masalah pada media pembelajaran yang digunakan: (1) media pembelajaran yang digunakan biasa saja sehingga kurang memotivasi belajar, (2) materi pembelajaran termasuk materi yang sulit, namun pemahaman terhadap materi biasa aja, dan (3) materi pembelajaran yang digunakan masih berupa media presentasi.  Kata Kunci: Analisa Kebutuhan, Media Pembelajaran, Mekanika Bahan  ABSTRACT This study aims to analyze the needs of students towards the development of learning media in Mechanics of Material Course in Education of Building Engineering, State University of Jakarta. The needs assessment is carried out based on the first stage of the Lee and Owens model, which is assessment/analysis. The result of this study is a needs assessment whose main purpose is to identify gaps between the actual conditions and the conditions that should be. Data collection in this study used a questionnaire with the qualitative data types. The questionnaire was distributed using google form so that the respondents can fill out the questionnaire online. The period for filling out the questionnaire is May 16th “ 17th, 2019. Based on the results of the needs assessment that has been done, there are several problems in the learning media that are used: (1) learning media that are used is mediocre that it is less motivating to learning, (2) learning material including difficult material, but an understanding of the material is medium, and (3) learning material used is still in the form of presentation media.Keywords: Needs Assessment, Learning Media, Mechanics of Material
PENGGUNAAN ABU SEKAM PADI SEBAGAI PENGGANTI SEMEN PADA BETON GEOPOLIMER Sandya, Yoga; ., Prihantono; Musalamah, Sittati
Educational Building: Jurnal Pendidikan Teknik Bangunan dan Sipil Vol. 5 No. 2 DES (2019): EDUCATIONAL BUILDING
Publisher : Jurusan Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24114/ebjptbs.v5i2 DES.16142

Abstract

Beton geopolimer adalah beton yang material utamanya mengandung bahan yang bersifat pozzolan. Pozzolan adalah bahan yang mengandung senyawa Silika dan Alumina. Dengan bentuknya yang halus, pozzolan dapat direaksikan dengan alkali aktivator. Prekursor atau material alternatif pengganti semen sebagai bahan pengikat dalam beton geopolimer biasanya menggunakan abu terbang (fly ash), abu sekam padi (RHA), ampas tebu, cangkang telur dan lain “ lain, yang banyak mengandung silikon dan aluminium. Sebagai aktivator pada umumnya digunakan natrium hidroksida (NaOH) dan sodium silikat (Na2SO3). Material alternatif pengganti semen yang digunakan dalam penelitian ini adalah abu sekam padi. Abu sekam padi dapat digunakan sebagai alternatif pengganti semen dikarenakan abu sekam padi bersifat pozzolan dan mengandung Silika sekitar 87-97%. Zat kimia tersebut adalah zat yang terdapat pada semen. Abu sekam padi pada penelitian ini akan dibakar hingga suhu ±800oC. Alkali aktivator yang digunakan adalah natrium hidroksida (NaOH) dan sodium silikat (Na2SO3) dengan perbandingan 65% : 35%; 70% : 30%; dan 75% : 25% dari berat prekursor. Penelitian ini berjuan untuk mengitung kebutuhan mix design dari beton geopolimer menggunakan SNI 03-2834-2000 tentang tata cara pembutan rencana campuran beton normalKata Kunci: Geopolimer, Na2SiO3,  NaOH, Prekursor, RHA ABSTRACT Geopolymer concrete is a concrete with main materials containing pozzolanic properties. Pozzolan is an ingredient that contains silica and alumina compounds. With its smooth shape, pozzolan can be reacted with an alkaline activator.Precursors or alternative materials to replace cement as a binder for geopolymer concrete typically use fly ash, rice husk ash, sugarcane bagasse, egg shells, and other materials that contains a lot of silicon and alumunium. Materials such as sodrium hydroxide (NaOH), and sodium silicate (Na2SO3) are generally used as activators. The alternative ingredient used as replacement for cement used in this study is rice husk ash. Rice husk ash can be used as an alternative replacement for cement because rice husk ash is pozzolanic and contains about 87-97% of silica. These chemical substannces are generally found in cement. In this study, the rice husk ash is burned with temperatures up to ±800oC. Alkaline activators used in this study are sodrium hydroxide (NaOH), and sodium silicate (Na2SO3) with a ratio of 65% : 35%; 70% : 30%;and 75% : 25% by the precursors weight.This study aims to calculate the mix design using SNI 03-2834-2000 about the procedures for making a normal concreat mix designKeywords: Geopolimer, Na2SiO3, NaOH, Prekursor, RHA
KAJIAN KUAT TEKAN BETON RINGAN TIDAK TERKEKANG BERAGREGAT KASAR POLIPROPILENA DILAPISI PASIR Waoma, Adolf; Purnomo, Heru; Musalamah, Sittati
Construction and Material Journal Vol. 7 No. 2 (2025): Construction and Material Journal Vol. 7 No. 2 Oktober 2025
Publisher : Politeknik Negeri Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32722/cmj.v7i2.7522

Abstract

This study aims to determine the compressive strength, density, and crack pattern of lightweight concrete utilizing polypropylene coated with sand as coarse aggregate and Tayan sand as fine aggregate. The research employs three mix design clusters based on the water-to-cement ratio (w/c): Cluster A with a w/c ratio of 0.347, Cluster B with a w/c ratio of 0.339, and Cluster C with a w/c ratio of 0.319. Cylinder-shaped specimens measuring 15×30 cm were prepared for each cluster. For the 15×30 cm cylinder specimens, the average compressive strength obtained was 21.69 MPa, 22.15 MPa, and 24.53 MPa for Clusters A, B, and C, respectively, with standard deviations of 0.59, 0.49, and 1.51. The density of lightweight concrete was recorded as 1717.54 kg/m³, 1689.17 kg/m³, and 1802.93 kg/m³ for Clusters A, B, and C, respectively. The observed crack pattern corresponds to Type 3, in reference to ASTM C39. Keywords: Lightweight Concrete; Polypropylene; Tayan
PERENCANAAN STRUKTUR INSTALASI PENGOLAHAN AIR LIMBAH RUMAH PEMOTONGAN HEWAN MENGGUNAKAN METODE ACTIVATED SLUDGE (Studi Kasus Rumah Pemotongan Hewan Pulo Gadung Jakarta Timur) Putra, Wira Agung Syah; Musalamah, Sittati; Rahmayanti, Henita
Jurnal Pendidikan Teknik dan Vokasional Vol. 3 No. 1 (2020): Jurnal Pendidikan Teknik dan Vokasional
Publisher : LPPM, Universitas Negeri Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (201.306 KB) | DOI: 10.21009/JPTV.3.1.40

Abstract

This reasearch aims to plan the wastewater treatment unit resulting from the activities of slaughterhouses (RPH) located in RPH Dharma Jaya Pulo Gadung. In planning RPH waste water treatment using Activated Sludge (active sludge) system. This wastewater treatment system will be planned in RPH Dharma Jaya Pulo Gadung neighborhood, East Jakarta. The results of the planning of a container tub, sedimentation tub and aeration tub with a total area of ​​114 m² overall. The 5 x 4 x 3 m container uses a concrete structure with 8 ø 20 and ø 12 - 100 mm reinforcement bars on its walls and 8 ø 20 and ø 12 - 125 mm bars on the bottom plate of the tub. In the first 3 x 1 x 3 m racking basin using a concrete structure with 8 ø 16 and ø 12 - 125 mm reinforcement on its walls and 8 ø 20 and ø 12 - 75 mm bars on the bottom plate of the tub. In the aeration tub with dimensions of 3 x 2 x 2.3 m using a concrete structure with 6 ø 16 and ø 12 - 100 mm reinforcement on the walls and reinforcement 6 ø 20 and ø 12 - 125 mm on the bottom plate of the tub. For the connecting channel with Q max of 2.85 m³ / sec we obtain the width and channel depth b = 14 cm and d = 7 cm for the channel from Bar Screen to the container. For the channel from the reservoir to the settling tub with Q max of 2.37 m³ / sec obtained b = 14 cm and d = 7 cm. And the channel from the settling tub to the aeration bath is 2.04 m³ / sec with the length b = 12 cm and d = 6 cm. Keywords: activated sludge, planning, wastewater treatment