Claim Missing Document
Check
Articles

Found 10 Documents
Search

Purwarupa Mode Konverter Rectangular Waveguide Menggunakan Double-Trench Hidayat, M. Reza; Poetra, Adhitya Ari
Jurnal Teknik: Media Pengembangan Ilmu dan Aplikasi Teknik Vol 19 No 1 (2020): Jurnal Teknik - Media Pengembangan Ilmu dan Aplikasi Teknik
Publisher : Fakultas Teknik - Universitas Jenderal Achmad Yani

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (555.853 KB) | DOI: 10.26874/jt.vol19no01.135

Abstract

Waveguide merupakan suatu alat yang berbentuk menyerupai selongsong persegi ataupun melingkar yang terbuat dari bahan konduktor tunggal. Alat tersebut dapat disisipi dielektrik untuk mengatur frekuensi tertentu atau konverter untuk mengubah mode dari gelombang yang digunakan. Penelitian ini melakukan implementasi konverter mode TE10 ke mode TMmn pada rectangular waveguide dan menggamati karakteristik dari vektor gelombang konverter serta parameter S11 dan S21. Proses pengujian dilakukan dengan mencoba beberapa rancangan dan membandingkan hasilnya, kemudian mengimplementasikannya pada alat. Simulasi dilakukan untuk mendapatkan hasil terbaik. Berdasarkan analisis dari proses simulasi menggunakan software ansoft HFSS, hasil terbaik didapatkan pada konverter mode TMmn parameter dengan rancangan double-trench belah ketupat dan frekuensi cut off 6.4 GHz. Nilai return loss sebesar -14.289 dB dan insertion loss sebesar -0.281 dB. Sedangkan pada rancangan konverter double-trench kembar didapatkan hasil frekuensi cut off sebesar 9.2 GHz dengan nilai return loss -12.878 dB dan nilai insertion loss -0.467 dB. Pada saat pengujian alat yang dilakukan menggunakan Vector Network Analyzer (VNA), frekuensi cut-off yang diperoleh adalah sebesar 7.03 GHz dengan return loss -12.68 dB, dan insertion loss -6.80 dB.
Klasterisasi Sumber Penyebaran Virus Covid-19 dengan Menggunakan Metode K-MEANS Di Daerah Kota Cimahi dan Kab. Bandung Barat Hidayat, M. Reza; Arief Rachman
Jurnal Teknik: Media Pengembangan Ilmu dan Aplikasi Teknik Vol 19 No 2 (2020): Jurnal Teknik - Media Pengembangan Ilmu dan Aplikasi Teknik
Publisher : Fakultas Teknik - Universitas Jenderal Achmad Yani

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26874/jt.vol19no02.233

Abstract

Virus Covid-19 berasal dari Kota Wuhan di China. Penularannya sangat cepat dan pesat ke berbagai belahan dunia termasuk di Indonesia. Penelitian ini membahas tentang klasterisasi sumber penyebaran virus covid-19 dengan metoda k-means menggunakan software WEKA untuk Kota Cimahi dan Kab Bandung Barat. Tujuan dari penelitian ini yaitu memperoleh informasi tentang 5 klaster sumber penyebaran virus Covid-19, yaitu klaster 0 (kantor), klaster 1 (tempat makan), klaster 2 (rumah), klaster 3 (perbelanjaan), dan klaster 4 (transportasi umum) selama bulan Mei sampai Juli 2020 untuk Kota Cimahi dan Kab Bandung Barat. Hasil dapat disimpulkan pada klaster 0 tertinggi dari Kab. Bandung Barat dengan rata-rata 0,05%, untuk klaster 1 dampak covid-19 tertinggi dari Kab. Bandung Barat dengan rata-rata 0,55%, untuk klaster 2 dengan rata-rata 0,02%, untuk klaster 3 dampak covid-19 tertinggi dari Kab. Bandung Barat dengan rata-rata 0,04%, untuk klaster 4 dampak covid-19 tertinggi dari Kota Cimahi dengan rata-rata 0,79%.
Analisis Power Link Budget Pada Rancangan Jaringan Wireless Outdoor Menggunakan ISP Design Center Studi Kasus Desa Kutanagara Garut Hidayat, M. Reza; Fauzian, Tubagus Indra Maulana; Alimudin, Erna; Yuliana, Hajiar
Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan Vol. 10 No. 2 (2022): TELEKONTRAN vol 10 no 2 Oktober 2022
Publisher : Program Studi Teknik Elektro, Fakultas Teknik dan Ilmu Komputer, Universitas Komputer Indonesia.

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34010/telekontran.v10i2.7978

Abstract

One of the problems with internet networks in rural areas is the difficulty of connecting cable-based internet because the distance is too far, wireless/wireless-based internet networks can be an alternative solution to these problems. A research analysis of the Power Link Budget calculation was carried out in planning the outdoor wireless internet network in the village. Kutanagara Garut. The test was carried out using the Power Link Budget calculation method and simulation using the Ubiquiti ISP Design Center application with a LiteAP GPS transmitter device and a NanoBeam 5AC receiver. Network planning is made using the Point to Point (PTP) system in the 5725 MHz frequency band to be precise at 5725 MHz Sub Band NII-3. The parameters tested are SOM (EIRP, margin signal), free space loss (FSL), Fresnel zone clearance (FZC), coverage area, signal strength obtained and internet speed capacity. The results of the calculations and configurations show that the EIRP value of the sender is 36 dBm, the EIRP of the receiver is 36 dBm, the maximum bandwidth is 20 MHz, Fresnel zone clearance is 3.4 m and the received signal strength is -49 dBm. These results have met the standards set by KOMINFO and a network design can be made. The results of the network simulation show that the internet network design has covered the entire area of Kutanagara Garut Village with an estimated signal obtained is -49 dBm, with a signal margin of 46.2 dB which already meets the standards of TIPHON with network classification included in the outstanding category (very good). Has a maximum internet capacity of 147 Mbps consisting of 74 Mbps download speed and 74 Mbps upload speed
ANTENA SUSUN 4×1 MIKROSTRIP MENGGUNAKAN BIQUAD PATCH PADA FREKUENSI X-BAND UNTUK TELEKOMUNIKASI TERESTRIAL Hidayat, M. Reza; Kurniawan, Muhammad Luthfi
Jurnal Elektro dan Telekomunikasi Terapan (e-Journal) Vol 9 No 2 (2022): JETT Desember 2022
Publisher : Direktorat Penelitian dan Pengabdian Masyarakat, Universitas Telkom

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25124/jett.v9i2.5454

Abstract

The need for information exchange that encourages the development of telecommunications technology that can be a medium for delivering information to connect various places on the earth's surface or called terrestrial telecommunications. In wireless communication, the use of radio waves as a medium for propagation of information is considered more effective than physical media such as cables. A high radio frequency value such as X-Band will result in a smaller dimensional device. The use of microstrip type antennas has advantages in terms of small dimensions, inexpensive fabrication, and simple design but has low gain. Therefore, the design of a microstrip antenna with the array method becomes a solution that can be used in applications in terrestrial telecommunications. In this research, a microstrip antenna with a biquad-shaped patch has been designed and realized with a 4×1 array method that operates in the X-Band frequency band. This antenna works at a frequency of 11.96 GHz with a return loss of -23.51 dB and a VSWR of 1.13.
BANDPASS FILTER MICROSTRIP FREKUENSI 6 GHZ MENGGUNAKAN SPLIT RING RESONATOR BERBASIS DEFECTED GROUND STRUCTURE UNTUK RADAR C-BAND Awaludin, Ajrul Faza; Hidayat, M. Reza; Alimudin, Erna
Jurnal Elektro dan Telekomunikasi Terapan (e-Journal) Vol 10 No 2 (2023): JETT Desember 2023
Publisher : Direktorat Penelitian dan Pengabdian Masyarakat, Universitas Telkom

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25124/jett.v10i2.6652

Abstract

In telecommunications, filters are devices that play an important role in a telecommunications system. One of them is a bandpass filter that can pass signals with a passband frequency and cut off the stopband frequency. In the process, various kinds of signal interference will be found that can interfere with the quality of electromagnetic waves. This research will design and realize a microstrip bandpass filter that can pass the 6 GHz frequency with a minimum bandwidth of ? 100 MHz for C-Band Radar applications. This filter is designed using a square open loop resonator which will be simulated using the CST studio suite 2019 which will be realized using a 4-epoxy FR substrate. In this study the design of a microstrip bandpass filter was carried out with three stages of design simulation to determine the characteristics of the square open loop resonator, split ring resonator, and defected ground structure design. Based on the results of the final design of the microstrip bandpass filter design, the simulation results obtained work at a resonant frequency of 6 GHz with a return loss value of -32.098 dB, an insertion loss value of -0.40148 dB and a bandwidth of 97.3 MHz. The results of bandpass filter fabrication measurements were obtained at a resonant frequency of 6 GHz, the results obtained were in accordance with the required specifications with a return loss of -29.09 dB, an insertion loss of -2.75 dB with a bandwidth of 485.4 MHz.
ANALISIS KUALITAS JARINGAN WIFI.ID PADA KOPI JANJI JIWA CIJERAH BERDASARKAN PARAMETER QOS (QUALITY OF SERVICE) Disastra, Andika Dwipraja; Hidayat, M. Reza
Jurnal Teknik Vol 13, No 1 (2024): Januari - Juli 2024
Publisher : Universitas Muhammadiyah Tangerang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31000/jt.v13i1.5080

Abstract

One of the services provided by Kopi Janji Jiwa Cijerah is the internet, therefore research is conducted aimed at testing and improving the quality of the internet network WiFi.ID at the Kopi Janji Jiwa Cijerah place based on Quality of Service (QoS) parameters with the Drive Test method. The test was conducted by The Drive method using Wireshark software for ± 6 hours within 7 days at 12.00-18.00 WIB at Kopi Janji Jiwa Cijerah by utilizing the services provided on the spot that is WiFi.ID where the first test at access point 2,4 GHz type TP-LINK CPE205 2,4 GHz then the second test after optimization using Access Point 5 GHz tent type 06 P2P 5 GHz. Quality of Service (QoS) parameters tested and analyzed consist of delay, throughput, jitter and packet loss with tiphon standards that are the reference classification. The results in the first test resulted in an index of average QoS parameters based on the TIPHON standard of 3.575 and in the second test that after optimization got an average value index from the QoS parameter based on the TIPHON standard of 3,925, based on the value index there was an improvement in the quality of the network, then the quality of the internet network WiFi.ID in Kopi Janji Jiwa Cijerah got a Good classification and approached Very Good.
Antena Multiple-Input Multiple-Output (MIMO) Array 1×4 Axe Patch Microstip pada Frekuensi 2,4 GHz Sabtiawan, Thaufiq; Hidayat, M. Reza; Saputera, Yussi Perdana; Somantri, Nivika Tiffany
Jurnal Teknik: Media Pengembangan Ilmu dan Aplikasi Teknik Vol 23 No 1 (2024): Jurnal Teknik - Media Pengembangan Ilmu dan Aplikasi Teknik
Publisher : Fakultas Teknik - Universitas Jenderal Achmad Yani

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55893/jt.vol23no1.585

Abstract

MIMO (Multiple-Input Multiple-Output) Antenna Technology improves wireless network performance by allowing the use of multiple transmit and receive antennas simultaneously. MIMO antennas use antenna elements in an array, such as circular microstrip antennas, to increase signal throughput and reliability. This research simulates and develops a circular microstrip antenna into a 1×4 axe MIMO with array, operating at 2.4 GHz. The simulation shows return loss (S11) -60.913 dB, insertion loss -50.439 dB, VSWR 1.001, bandwidth 116.3 MHz, and gain 5.709 dBi. The results of fabrication and measurement achieve return loss (S11) -61.69 dB, insertion loss -43.16 dB, VSWR 1.00, bandwidth 137.2 MHz at a frequency of 2.4260 GHz. Even though there is a frequency shift of 260 MHz between the simulation and measurement results, the design of this antenna is successful according to the desired specifications.
IMPLEMENTASI THREAT MITIGATION DAN TRAFFIC POLICY MENGGUNAKAN UTM PADA JARINGAN TCP/IP Hidayat, M. Reza; Saragih, Ruben; Basuki, Sofyan; Charisma, Atik; Setiawan, Antrisha Daneraici
Jurnal Teknologi Informasi dan Ilmu Komputer Vol 11 No 2: April 2024
Publisher : Fakultas Ilmu Komputer, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25126/jtiik.20241127528

Abstract

Penelitian bertujuan merancang UTM berbasis aplikasi open-source yang mampu melakukan Threat Mitigation dan menerapkan manajemen trafik pada jaringan TCP/IP. Metoda Threat Mitigation menggunakan SNORT sebagai IPS untuk melakukan tindakan terhadap ancaman serta melakukan monitoring trafik yang diintegrasikan dengan Splunk sebagai SIEM. Metoda Traffic Policy menggunakan SQUID sebagai Proxy untuk melakukan manajemen trafik. Pengujian perfomansi jaringan dilakukan dengan mengukur parameter QOS terlebih dahulu pada setiap perangkat akses untuk melihat performansi jaringan saat terjadi serangan sebelum dan sesudah implementasi UTM. Serangan DDOS berupa ICMP Flood dan SYN Flood. Setelah melakukan simulasi serangan DDOS selama 5 menit, Threat Mitigation mampu melakukan drop terhadap paket yang berasal dari serangan DDOS sebanyak 232409 paket dengan nilai throughput maksimum 1,823 Mbps, lebih baik dari throughput yang dihasilkan serangan DDOS sebelum implementasi UTM yaitu 869 Mbps. Hasil indeks parameter QOS setiap perangkat akses jaringan memiliki nilai indeks 4, lebih baik dari indeks parameter QOS sebelum implementasi UTM yaitu 2,843. Traffic Policy pada UTM mampu melakukan efisiensi bandwidth sebesar 4,66% atau 943,6645 MB selama 5 hari kerja dari total volume cache 20,23 GB, dengan menerapkan web cache untuk akses HTTP dan limitasi throughput sebesar 300 KB pada ekstensi file image, audio, video dan executeable berukuran diatas 20 MB.
Hyperparameter Optimization of Random Forest Algorithm to Enhance Performance Metric Evaluation of 5G Coverage Prediction Hajiar Yuliana; Iskandar; Hendrawan; Basuki, Sofyan; Hidayat, M. Reza; Charisma, Atik; Vidyaningtyas, Hurianti
Buletin Pos dan Telekomunikasi Vol. 22 No. 1 (2024): June 2024
Publisher : Centre for Research and Development on Resources, Equipment, and Operations of Posts and I

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17933/bpostel.v22i1.390

Abstract

Utilizing of 5G technology has become a major focus in the development of more advanced and efficient telecommunications networks. In this context, 5G coverage prediction becomes an important aspect in network planning to ensure optimal user experience. In this study, we explore the use of Random Forest algorithm to predict 5G coverage, with special emphasis on the hyperparameter optimization process to improve model performance. We conduct experiments with various hyperparameter combinations, including 'max_depth', 'max_features', 'min_samples_leaf', 'min_samples_split', and 'n_estimators', using hyperparameter optimization techniques. The results show that by paying attention to the optimal combination of hyperparameters, we managed to significantly improve the performance of the model. The optimized model produces a Minimum Root Mean Squared Error (RMSE) of 0.6, which is much better than the Random Forest model without hyperparameter optimization which has an RMSE of 1.14. The result of this study confirms the importance of the hyperparameter optimization process in improving the accuracy and consistency of the Random Forest model for 5G coverage prediction. The results have important implications in supporting the development of a successful 5G network infrastructure in the future.
The Influence of Literacy-Based Learning Strategies on Students’ Critical Thinking Skills at SMA Muhammadiyah 01 Medan Syahputra, Arif; Aulia, Zanzabila; Hidayat, M. Reza
Integrasi: Jurnal Studi Islam dan Humaniora Vol 3, No 2 (2025)
Publisher : Yayasan Rahmat Islamiyah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56114/integrasi.v3i2.12521

Abstract

This study aims to examine the influence of literacy-based learning strategies on students’ critical thinking skills at SMA Muhammadiyah 01 Medan. A quantitative approach with a quasi-experimental design was employed. The population consisted of all eleventh-grade students, and the sample was selected purposively. Data were collected through critical thinking tests administered before and after the implementation of the treatment. The data analysis revealed a significant improvement in students' critical thinking skills following the application of the literacy-based learning strategy. These findings indicate that literacy-based learning strategies are effective in fostering students’ critical thinking by encouraging deep reading, analytical thinking, and the development of logical and reflective arguments.