Article Per Year (5 Year)
p-Index From 2020 - 2025
1.836
P-Index
This Author published in this journals
All Journal Rekayasa Mesin Jurnal Teknologi dan Vokasi
Marfizal, Marfizal
Unknown Affiliation
Civil Engineering, Building, Construction & Architecture Computer Science & IT Control & Systems Engineering Electrical & Electronics Engineering Engineering Mechanical Engineering

Published : 11 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 11 Documents
Search

 1   2 
DESAIN KONSEP PURWARUPA MESIN INJECTION MOLDING TIPE VERTIKAL UNTUK DAUR ULANG LIMBAH PLASTIK SKALA RUMAH TANGGA Sufiyanto, Sufiyanto; Niam, Waridin; Marfizal, Marfizal; Aziz, Myson
Jurnal Rekayasa Mesin Vol. 14 No. 3 (2023)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v14i3.1380

Abstract

Plastic waste is the main cause of environmental pollution. It is necessary to research the design of the Injection Molding machine to process plastic waste. This study describes the design concept of a vertical type Injection Molding machine prototype by considering the factors to be utilized by small-scale plastic recycling businesses. The design stage starts from the identification of component requirements to the design of 3D drawings. The results of this study obtained a prototype design of a Vertical Injection Molding Machine. The embodiment of the design is not only determined directly by the design team and the manufacturing team, but is obtained from customer requests described in the technical specifications. At the concept design stage, there are 5 sub-functions and each function has 3 to 4 options. From the combination of these sub-functions and options, 3 assembly sketches were obtained so that 3 alternative design concepts were obtained. From the results of the concept assessment, design concept C was chosen from several alternative concepts.
ANALISIS PENGARUH PROFIL SUDUH TERHADAP DAYA TURBIN VORTEX Marfizal, Marfizal; Sufiyanto, Sufiyanto; Wardianto, Dedi
Jurnal Teknologi dan Vokasi Vol 1 No 2 (2023): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2023.1.2.1-11

Abstract

A vortex turbine is a turbine that operates by utilizing a vortex flow as a drive for turbine blades which then the turbine shaft is connected to a generator to convert shaft mechanical energy into the form of electrical energy. In this study a test will be carried out on a vortex turbine with a head of 1 m, a flow rate of 0.12 m3/s. In the testing process, 3 types of blades will be used, namely straight blades, curved blades and finned curved blades. After testing, it can be concluded that the highest power is found in the curved blade of 959.08 Watt and then the finned curved blade is 714.38 Watt, while the lowest power is found in the straight blade type of 582.48 Watt. The resulting rotation can be seen in the graph below. The highest rotation is found in the finned curved blade of 540.00 rpm and the next is the curved blade of 517.67 rpm, while the lowest rotation is found in the straight blade type of 510.67 rpm. For the efficiency of each metal blade, it can be seen that curved blades are still the highest followed by curved blades with finned blades, the lowest being straight blades with salty blade efficiencies of 98%, 73% and 59%
PENGARUH LUBANG DAN JUMLAH DISK TERHADAP PERFORMA TURBIN TESLA Marfizal, Marfizal; Wardianto, Dedi; Sufiyanto, Sufiyanto
Jurnal Teknologi dan Vokasi Vol 2 No 1 (2024): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2024.2.1.17-26

Abstract

This research focuses on the effect of holes and the number of disks on the performance of the Tesla turbine, where this experiment uses one Tesla turbine unit with a constant inflow discharge of 0.037 m3/s and a constant load of 50 kg on. Then testing was carried out by varying the number of holes on the disk (4, 6, 8) and varying the number of disks (11,13, 15) with a hole diameter of 10 mm, disk diameter of 160 mm, disk thickness of 0.5 mm. After testing and data analysis, it can be seen that the variations in the number of holes on the disk (4,6,8) and the number of disks factor can be concluded that the maximum power is 310,148 Watts for the number of holes on the disk factor while for the number of disks factor it is 301,154 Watts, where there is a difference of 8,994 Watts. Meanwhile, the maximum efficiency is 73.754 for the number of holes in the disk, while for the number of disks it is 71.652, where there is a difference of 2.102.
DESAIN PEMBANGKIT LISTRIK TENAGA SURYA Marfizal, Marfizal; Tonadi Shodiq, Een; Wardianto, Dedi; Sufiyanto, Sufiyanto
Jurnal Teknologi dan Vokasi Vol 2 No 2 (2024): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2024.2.2.13-21

Abstract

The distribution of PLN electricity to remote areas has not been achieved so there are other alternative resources needed, for example solar power plants. The aim of this research is to design and analyze the potential for a solar power plant with an off-grid system that can be used to supply residential homes when PLN power goes out. This solar power plant is designed for a load of 17 kwh / per day, the efficiency (ηinv) of the inverter is 93%, the efficiency of the battery block is ηBAh = 85%, the DC system voltage is chosen as 48 V. The solar power generation system designed in this research is an off system -lattice. The main components were chosen based on the calculation results for the number of panels of 3563 Wp, with a total storage battery of 1172 Ah. If you use 48v/160ah Lithium batteries connected in parallel using 7 batteries with a charging time of 7.3 hours, minimum scc current of 74 Ah, inverter current of 41.6 Ah with a panel tilt angle of 15 degrees.
DESAIN TURBIN TESLA SEBAGAI PEMBANGKIT LISTRIK TENAGA AIR Marfizal, Marfizal; Wardianto, Dedi; Sufiyanto, Sufiyanto; Yusuf, Muhammad
Jurnal Teknologi dan Vokasi Vol 3 No 1 (2025): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2025.3.1.12-22

Abstract

This research focuses on the design of the Tesla Turbine as a simple Hydroelectric Power Plant. This design focuses on the main dimensions of the Tesla Turbine such as diameter, distance, disk thickness and other supporting components. This Tesla turbine is designed for. Head 9.8 m and discharge 0.028 m3/s so that the disk dimensions are obtained: distance between disks (b)= 0.8 mm, disk diameter (D)=160 mm, disk thickness (t)=0.40 mm, aspect ratio (ϵ)=0 mm, Ri= 24 mm, number of disks (N)=13 disks. For Nozzle dimensions: Nozzle surface area (An)=0.002m2, Nozzle diameter (Dn)=0.051m, Nozzle width =16.4mm. For the turbine housing, the following dimensions are obtained: turbine housing width ()=200mm, turbine housing height ()=200mm, wall thickness ()=8mm, turbine housing diameter ()=166mm, turbine housing thickness =40.26mm
PENGARUH LUBANG DAN JUMLAH DISK TERHADAP PERFORMA TURBIN TESLA Marfizal, Marfizal; Wardianto, Dedi; Sufiyanto, Sufiyanto
Jurnal Teknologi dan Vokasi Vol 2 No 1 (2024): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2024.2.1.17-26

Abstract

This research focuses on the effect of holes and the number of disks on the performance of the Tesla turbine, where this experiment uses one Tesla turbine unit with a constant inflow discharge of 0.037 m3/s and a constant load of 50 kg on. Then testing was carried out by varying the number of holes on the disk (4, 6, 8) and varying the number of disks (11,13, 15) with a hole diameter of 10 mm, disk diameter of 160 mm, disk thickness of 0.5 mm. After testing and data analysis, it can be seen that the variations in the number of holes on the disk (4,6,8) and the number of disks factor can be concluded that the maximum power is 310,148 Watts for the number of holes on the disk factor while for the number of disks factor it is 301,154 Watts, where there is a difference of 8,994 Watts. Meanwhile, the maximum efficiency is 73.754 for the number of holes in the disk, while for the number of disks it is 71.652, where there is a difference of 2.102.
DESAIN PEMBANGKIT LISTRIK TENAGA SURYA Marfizal, Marfizal; Tonadi Shodiq, Een; Wardianto, Dedi; Sufiyanto, Sufiyanto
Jurnal Teknologi dan Vokasi Vol 2 No 2 (2024): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2024.2.2.13-21

Abstract

The distribution of PLN electricity to remote areas has not been achieved so there are other alternative resources needed, for example solar power plants. The aim of this research is to design and analyze the potential for a solar power plant with an off-grid system that can be used to supply residential homes when PLN power goes out. This solar power plant is designed for a load of 17 kwh / per day, the efficiency (ηinv) of the inverter is 93%, the efficiency of the battery block is ηBAh = 85%, the DC system voltage is chosen as 48 V. The solar power generation system designed in this research is an off system -lattice. The main components were chosen based on the calculation results for the number of panels of 3563 Wp, with a total storage battery of 1172 Ah. If you use 48v/160ah Lithium batteries connected in parallel using 7 batteries with a charging time of 7.3 hours, minimum scc current of 74 Ah, inverter current of 41.6 Ah with a panel tilt angle of 15 degrees.
DESAIN TURBIN TESLA SEBAGAI PEMBANGKIT LISTRIK TENAGA AIR Marfizal, Marfizal; Wardianto, Dedi; Sufiyanto, Sufiyanto; Yusuf, Muhammad
Jurnal Teknologi dan Vokasi Vol 3 No 1 (2025): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2025.3.1.12-22

Abstract

This research focuses on the design of the Tesla Turbine as a simple Hydroelectric Power Plant. This design focuses on the main dimensions of the Tesla Turbine such as diameter, distance, disk thickness and other supporting components. This Tesla turbine is designed for. Head 9.8 m and discharge 0.028 m3/s so that the disk dimensions are obtained: distance between disks (b)= 0.8 mm, disk diameter (D)=160 mm, disk thickness (t)=0.40 mm, aspect ratio (ϵ)=0 mm, Ri= 24 mm, number of disks (N)=13 disks. For Nozzle dimensions: Nozzle surface area (An)=0.002m2, Nozzle diameter (Dn)=0.051m, Nozzle width =16.4mm. For the turbine housing, the following dimensions are obtained: turbine housing width ()=200mm, turbine housing height ()=200mm, wall thickness ()=8mm, turbine housing diameter ()=166mm, turbine housing thickness =40.26mm
PENGARUH PENAMBAHAN KACA FILM PADA PERMUKAAN SOLAR PANEL TERHADAP EFISIENSI DAN DAYA Marfizal, Marfizal; Sufiyanto, Sufiyanto; Wardianto, Dedi; Hadiansah, M. Tesar
Jurnal Teknologi dan Vokasi Vol 3 No 2 (2025): Jurnal Teknologi dan Vokasi
Publisher : ITP Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21063/jtv.2025.3.2.122-135

Abstract

This study is an experimental research that investigates the effect of varying solar panel tilt angles (180°, 15°, 30°) and adding an 80% darkness level glass film layer on power and efficiency. The study compares the results with and without the glass film for each tilt angle. The research methodology employed includes literature review and experimental development. The literature review provides a foundation for understanding the fundamental theories of solar panels, their working principles, and the impact of tilt angle on power and electrical efficiency. The results indicate that the tilt angle of solar panels significantly affects power and efficiency. The solar radiation received per unit area for each tilt angle (180°, 30°, 15°) is 920.3 W/m², 1002 W/m², and 1092.5 W/m² at 10:00 WIB, respectively, with the highest radiation observed at a 15° tilt angle. The power input to the solar panel without glass film for each tilt angle (180°, 30°, 15°) is 635 watts, 691.38 watts, and 753.82 watts at 10:00 WIB, respectively, with the highest power recorded at a 15° tilt angle. The efficiency of the solar panel without glass film for each tilt angle (180°, 30°, 15°) is 50.29%, 46.96%, and 53.46% at 14:00 WIB, respectively, with the highest efficiency achieved at a 15° tilt angle
DESAIN KONSEP PURWARUPA MESIN INJECTION MOLDING TIPE VERTIKAL UNTUK DAUR ULANG LIMBAH PLASTIK SKALA RUMAH TANGGA Sufiyanto, Sufiyanto; Niam, Waridin; Marfizal, Marfizal; Aziz, Myson
Jurnal Rekayasa Mesin Vol. 14 No. 3 (2023)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v14i3.1380

Abstract

Plastic waste is the main cause of environmental pollution. It is necessary to research the design of the Injection Molding machine to process plastic waste. This study describes the design concept of a vertical type Injection Molding machine prototype by considering the factors to be utilized by small-scale plastic recycling businesses. The design stage starts from the identification of component requirements to the design of 3D drawings. The results of this study obtained a prototype design of a Vertical Injection Molding Machine. The embodiment of the design is not only determined directly by the design team and the manufacturing team, but is obtained from customer requests described in the technical specifications. At the concept design stage, there are 5 sub-functions and each function has 3 to 4 options. From the combination of these sub-functions and options, 3 assembly sketches were obtained so that 3 alternative design concepts were obtained. From the results of the concept assessment, design concept C was chosen from several alternative concepts.
Co-Authors Aziz, Myson Hadiansah, M. Tesar Muhammad Yusuf Niam, Waridin Sufiyanto Sufiyanto, Sufiyanto Tonadi Shodiq, Een