Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Journal of Research and Technology

PENURUNAN BIOCHEMICAL OXYGEN DEMAND (BOD) DAN TOTAL SUSPENDED SOLIDS (TSS) PADA PENGOLAHAN LIMBAH CAIR DOMESTIK DENGAN PROSES ANAEROBIK BIOFILTER Ayu Pramita; Eka Dyah Puspita
Journal of Research and Technology Vol. 5 No. 1 (2019): JRT Volume 5 No 1 Jun 2019
Publisher : 2477 - 6165

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Domestic wastewater in the culinary area is waste water produced from several restaurants. The problem of liquid waste needs to get serious attention, because it has complex characteristics and the remaining results of these activities can cause the volume of wastewater with a high contaminant load that flows continuously over a long period of time. One way to manage the environment is through physical processing, namely by pre-treatment of sedimentation and biological treatment by biofilter anaerobic processes. Anaerobic biofilter is a biological treatment, which uses media as a place to grow and develop microorganisms, with no oxygen in the reactor. The parameters in liquid waste processing consist of three, namely physical parameters, chemical parameters and biological parameters. In the method of combating liquid waste here uses chemical parameters, namely BOD and TSS. Where BOD (Biochemical Oxygen Demand ) is the number of milligrams of oxygen needed by aerobic microbes to decompose karon organic matter in 1 L of water for 5 days at a temperature of 20˚C ±1˚C. Whereas for TSS (Total Suspended Solid) as the residue from total solids held by a filter with a particle size of maximum 2μm or greater than the size of colloidal particles, which include TSS are mud, clay, metal oxides, sulfides, algae, bacteria, and fungi . The aim of this research is that the liquid waste from the activity can be reused as clean water by anaerobic biofilter method using BOD and TSS parameters. The variables used are operational time. Reactor I and reactor II contain media arranged from the bottom up, namely rock fragments, gravel, shells and gauze. The operational time variations used are 0 hours as t0 or the first time the waste exits the reactor, and the time is 2 hours, 4 hours, 6 hours, and 8 hours is a periodic observation of operational time. The results showed that anaerobic biofilter has the ability to reduce the concentration of BOD (Biological Oxygen Demand) and TSS (Total Suspended Solid). Based on the Regulation of the Minister of Environment and Forestry of the Republic of Indonesia Number P.68 / Menlhk / Setjen / Kum.1 / 8/2016 concerning Domestic Waste Water Quality Standards, the characteristics of wastewater are obtained before treatment (pretreatment) which is 28- 31 ° C; pH 9,3-10; BOD 30 mg / L; and TSS 29 mg / L. Decreasing the initial state in reactor I for BOD is 25 mg / L. Whereas for the decrease in TSS is 16 mg / L. The results showed that anaerobic biofilter with pumice, gravel and clam shell media had the ability to reduce BOD and TSS concentrations significantly. The percentage decrease in concentration in reactor I was greater than that of reactor II, with an operational time of 6 hours for BOD allowance of 73,54%. While the operational time of 8 hours for TSS is 81,39%.
Penentuan Kadar Selulosa Asetat pada Daun Tanaman Puring (Codiaeum variegatum) sebagai Penyerap Timbal di Udara Ayu Pramita; Eka Dyah Puspitasari; Rostika Listyaningrum
Journal of Research and Technology Vol. 6 No. 2 (2020): JRT Volume 6 No 2 Des 2020
Publisher : 2477 - 6165

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55732/jrt.v6i2.352

Abstract

Pollution is one of the environmental problems in developing countries. Sources of pollution can be caused by nature and due to human actions. One of the air pollution sources is heavy metal content of Pb which is not easily decomposed in nature so that it can contaminate the environment. In Puring plants, especially the leaves have cellulose acetate which can filter heavy metals. The purpose of this study was the manufacturing of cellulose acetate from the leaves of the Puring plant. The cellulose obtained from the simplicia of leaves of the Puring plant will then be reacted into cellulose acetate through the acetylation reaction process using acetic anhydride with variations in temperature and reaction time taken, namely 40, 50, 60° C and as long as 50, 55, and 60 minutes. The levels of cellulose acetate were obtained through the cellulose extraction process, the synthesis of cellulose acetate and the final stage of making the membrane, from this process the optimum temperature and reaction time results were obtained in the second experiment with a temperature and reaction time of 50°C each and for 55 minutes without applying a catalyst 12.40%. In addition, the weight variation of raw material powder was taken, namely 20, 40, 60, 80, and 120 mg using a certain concentration of Pb (II) solution to determine the adsorbent capacity. These results can be obtained from analysis using Fourier Transform Infrared (FTIR).